Stabilization of inter-area and/or oscillatory modes in large-scale power system by voltage impedance power system (VIPS) apparatus based on decentralized control scheme

New technologies such as power electronics have made it possible to change continuously the impedance of a power system not only to control power flow but also to enhance stability. A power system incorporating a variable impedance apparatus such as a variable series capacitor (VSrC) and high-speed phase shifter (HSPS) is called VIPS (Variable Impedance Power System) by the authors. This paper proposes a novel control method of VIPS apparatus such as VSrC and HSPS installed at an interconnecting point for stabilizing inter-area unstable and/or oscillatory modes. The proposed design method of the control system is a kind of hierarchical decentralized control method of a large-scale power system based on a Lyapunov function. Under the proposed control scheme, each subsystem can be stabilized independently by local controllers such as AVR, speed governor and PSS, and then the whole interconnected system can be stabilized by VIPS apparatus taking into account interactions between subsystems. The effectiveness and robustness of the VIPS apparatus control are shown by numerical examples with model systems including a large-scale power system.     

OSP-P200最新开放式数控系统

上世纪90年代末，受到以国际互联网为代表的信息技术革命的影响，制造业为了构筑新的生产方法，开始引入各种信息技术工具。这是为了满足消费者品种多样化和个性化的需求，以大量生产为主的产品导向模式（Product Out）向多品种小批量的市场导向模式（Marketin）的变化为目的，充分利用信息技术和设计制造知识，更加快速和低价地向市场提供各种高附加价值产品。     

New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties

Understanding the structure/property relationship in polymer/layered silicate nanocomposites is of great importance in designing materials with desired properties. In order to understand these relations, a series of polylactide (PLA)/organically modified layered silicate (OMLS) nanocomposites have been prepared using a simple melt extrusion technique. Four different types of OMLS have been used for the preparation of nanocomposites, three were modified with functionalized ammonium salts while fourth one was a phosphonium salt modified OMLS. The structure of the nanocomposites in the nanometer scale was characterized by using wide-angle X-ray diffraction and transmission electron microscopic observations. Using four different types of layered silicates modified with four different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, thermal properties and spherulite morphology, materials properties, and biodegradability. Finally, we draw conclusions about the structure/property relationship in the case of PLA/OMLS nanocomposites.     

Effect of inorganic salt on adsorption of sodium alkyl sulfates and fatty acid sodium salts from aqueous solution onto ion exchange resins

The adsorption isotherms of sodium salts of alkyl sulfonic acid and fatty acid with various carbon numbers onto ion exchange resins were measured in the absence and in the presence of sodium chloride in aqueous solutions. In the absence of the inorganic salt, the amount of adsorption remarkably increased with an increase in the length of alkyl groups in the adsorbates. Furthermore, the amount of adsorption apparently decreased with addition of sodium chloride into the solutions and almost reached a constant value at high concentrations of NaCl. This behavior strongly suggested that the electrostatic interaction on the adsorption decreased with increasing salt concentration and that the effect of hydrophobic interaction seems to play an important role on adsorption.     

Using selective precipitant for uranyl ions — Fundamental studies for evaluating the precipitant performance

We have developed a simple reprocessing process for spent FBR fuels using N-cyclohexyl-2-pyrrolidone (NCP) which has selective precipitation ability for UO₂²⁺ ions. It was confirmed that NCP has sufficient precipitation ability for UO₂²⁺ ions, decontamination capability (separation of UO₂²⁺ from simulated fission products), and resistance to γ-ray radiation in nitric acid solutions. These findings indicate that NCP is applicable to our reprocessing process. We have also evaluated performances of other precipitants such as N-n-propyl-2-pyrrolidone (NProP), N-n-butyl-2-pyrrolidone (NBP), and N-n-butyl-2-pyridone (NBPyr). It was found that higher decontamination factors (DFs) are obtained by using NProP and NBP. This can be interpreted that the hydrophobicity of NProP and NBP is lower than that of NCP. Furthermore, we have obtained an experimental result that the resistance of NBPyr to γ-ray radiation is superior to that of NCP.     

Studies on synthetic-polymer plates with high surface energy. II. Diethylene glycol bis(allyl carbonate)–unsaturated carboxylic acid system

Polymer plates with high surface energy were prepared by the procedure described in the previous paper, using diethylene glycol bis(allyl carbonate) as a substrate polymer and acrylic acid or methacrylic acid as a hydrophilic monomer. By the alkali treatment (immersing in an aqueous 0.1N NaOH solution for 2 h), the resulting polymer plates had good water wettability (contact angle for water = 10°) and sufficient mar resistance (the scratching hardness = 45–50 g) in a dry state, and their clarities were higher than those for DAP systems previously reported. The surface densities of carboxyl groups on the polymer plate estimated by use of the McBain's equation were 0.18–0.46 molecule/Ų.     

Risk assessment of airborne fine particles and nanoparticles

Pulmonary health effects of fine particles and nanoparticles are overviewed in this paper, mainly based on the researches conducting in our laboratory. For the hazard assessment, we exposed rats to aerosolized asbestos-substitutes or nanoparticles aerosols (nickel oxide and titanium dioxide), and examined the biological and pathological effects of the particle on lung, a major target organ for the particles, and cytokines which are related to inflammation, fibrosis and carcinogenesis in the lung. It is essential to perform comprehensive evaluation of the toxicity of poorly soluble powder samples using the precise characterization data and exposure methods, such as single instillation or aerosol inhalation.     

MAP kinase pathways as a route for regulatory mechanisms of IL-10 and IL-4 which inhibit COX-2 expression in human monocytes

Herein we describe a new test system to produce a standardized partial muscle-tendon junction (MTJ) stretch injury. In anesthetized rabbits the tibialis anterior (TA) muscle-tendon unit is unilaterally shortened using a custom designed clamp roller system. An angular displacement (average velocity of 450 degrees x s[-1]) is applied about the foot to plantarflex the ankle 90 degrees while the lower extremity is fixed. During ankle rotation the TA muscle is tetanically stimulated to generate an eccentric stretch injury at the MTJ. Forty-eight hours after injury, isometric torque deficit (injured/sham) was measured. Two groups of animals (N = 6 in each group) were tested with the only difference between the two groups being the initial tendon shortening. In Group 1 (tendon shortening = 1.2 cm. N = 6) the torque deficit was 36.7+/-5.9% (mean+/-SD). In Group 2 (tendon shortening = 1.5 cm. N = 6) the torque deficit was 58.7+/-7.4% (mean+/-SD). No order effect was suggested by the data (P = 0.6062), but the difference in torque deficit between the two groups was highly significant (P = 0.0001). For all tests in which the tendon was temporarily shortened before muscle stimulation and stretch (N = 12) there was a visible hematoma at the MTJ similar to the injury that is common in athletic injuries. Histological evaluation 48 h after injury revealed both fiber tearing and inflammation at the MTJ. In addition, there was focal fiber damage in the muscle belly for both groups. The damage and inflammatory process, however, were more severe in the group with greater initial tendon shortening.