Study on Contamination Control for Yield Enhancement in the Manufacturing Line of Cellular Phone Modules

Practical studies on the method of contamination control for yield enhancement in the cellular phone modules production line were carried out. A contamination control method was proposed, consisting of data collection, data analysis, improvement action, verification, and implementation of control. The partition check method and the composition analysis for data collection and data analysis were respectively used in the cellular phone modules manufacturing process, and these methods were evaluated by the variation of yield loss before and after implementing the actions for improvement. In the partition check method, the critical process step was selected, and yield loss reduction through improvement actions was observed, whereas in the composition analysis, critical sources were selected, and yield loss reduction through improvement actions was investigated. From the results, it is concluded that the partition check and the composition analysis are effective solutions for contamination control in cleanroom production lines.     

Forecasting trends of high-frequency KOSPI200 index data using learning classifiers

Recently many statistical learning techniques have been applied to the prediction of financial variables. The aim of this paper is to conduct a comprehensive study of the applications of statistical learning techniques to predict the trend of the return of high-frequency Korea composite stock price index (KOSPI) 200 index data using the information from the one-minute time series of spot index, futures index, and foreign exchange rate. Through experiments, it is observed that the spot index change is better predictable with high-frequency time series data and the futures index information significantly improves the prediction accuracy of the return trends of the spot index for high-frequency index data, while the information of exchange rate does not. Also, dimension reduction process before training helps to increase the accuracy and dramatically for some classifiers. In addition, the trained classifiers with which a virtual trading strategy is applied to, noticeable better profits can be achieved than just a buy-and-hold-like strategy.     

Experimental investigation on the detachable thermosiphon for conduction-cooled superconducting magnets

A detachable thermosiphon, as a transient thermal switch for conduction-cooled superconducting magnet, is designed, fabricated and tested. A thermosiphon between the first and second stages of a cryocooler can reduce the cool-down time of a conduction-cooled superconducting magnet by using the large cooling capacity of the first stage. The thermosiphon is a very efficient heat transfer device until all the working fluid in it freezes (off-state). After the working fluid freezes and the second stage temperature becomes lower than that of the first stage, however, the thermosiphon then becomes a conduction heat leak path between two stages of the cryocooler. Considering a very small cooling capacity of the second stage of the cryocooler around 4.2 K, the conduction heat loss is not negligible. Therefore, a detachable thermosiphon, made of a metal bellows, is considered to be able to eliminate such a conduction heat leak. The mock-up magnet is cooled down with the thermosiphon and the thermodynamic states of the thermosiphon and the mock-up magnet are precisely examined during the whole cool-down process. At off-state, the thermosiphon is detached mechanically from the magnet. In this way, the conduction heat leak path through the thermosiphon wall is completely eliminated. This paper describes the detailed transient operation of the detachable thermosiphon using nitrogen as the working fluid.     

Neuronal ApoE Regulates the Cell-to-Cell Transmission of α-Synuclein

The presence of protein inclusions, called Lewy bodies (LBs) and Lewy neurites (LNs), in the brain is the main feature of Parkinson’s disease (PD). Recent evidence that the prion-like propagation of α-synuclein (α-syn), as a major component of LBs and LNs, plays an important role in the progression of PD has gained much attention, although the molecular mechanism remains unclear. In this study, we evaluated whether neuronal ApoE regulates the cell-to-cell transmission of α-syn and explored its molecular mechanism using in vitro and in vivo model systems. We demonstrate that neuronal ApoE deficiency attenuates both α-syn uptake and release by downregulating LRP-1 and LDLR expression and enhancing chaperone-mediated autophagy activity, respectively, thereby contributing to α-syn propagation. In addition, we observed that α-syn propagation was attenuated in ApoE knockout mice injected with pre-formed mouse α-syn fibrils. This study will help our understanding of the molecular mechanisms underlying α-syn propagation.     

Preparation and photoluminescence properties of γ-KCaPO4: Eu phosphors for near UV-based white LEDs

Novel whitish-blue phosphors based on a phosphate host matrix, γ-KCaPO₄: Eu²⁺, were prepared by a conventional solid-state reaction method using slightly phosphorus deficient conditions and their photoluminescence properties were investigated. The concentration quenching process, temperature dependence of the luminescence and decay curve were also investigated. The γ-KCaPO₄: Eu²⁺ phosphor was efficiently excited by UV-Visible light at wavelengths of 200-450 nm and exhibited a bright whitish-blue emission with a maximum peak wavelength of 473 nm. All of these characteristics suggest that the γ-KCaPO₄: Eu²⁺ phosphors combined with red phosphors could be applicable to near UV-based white LEDs, i.e., only two kinds of phosphor powders are needed for the formation of white light.     

Tooling device design for vibration-assisted high speed shaping of PMMA

PMMA optical components that are used as one of the most important parts of high precision equipments and machines are increasingly replacing the glass due to the various advantages of PMMA. Especially in Light Guide Panels, the PMMA sheet that is used in Liquid Crystal Displays plays an important role in scattering the incident light and requires very fine machining as the sheet is directly related to the optical characteristics of the panels. The High Speed End milling and High Speed Shaping processes that are widely adopted and applied to the precise machining of Light Incident Plane still have quality problems, such as cracks, breakages, poor waviness, and straightness. This paper presents the tooling device design for machining a Light Incident Plane through vibration-assisted High Speed Shaping for increasing the optical quality by minimizing the above-mentioned problems. The cutting tool and the tool post presented in this paper are designed by the authors to increase the magnitude of the cutting stroke by adopting the resonant frequency without weakening the stiffness and to reduce vibrations during even high speed feeding. The dynamic characteristics of the cutting tool and the tool post are evaluated through simulation and experiment as well. The results reveal very appropriate dynamic characteristics for vibration-assisted High Speed Shaping.     

An InGaP-GaAs HBT MMIC smart power amplifier for W-CDMA mobile handsets

We demonstrate a new linearized monolithic microwave integrated circuit smart power amplifier of extraordinary high power-added efficiency (PAE), especially at the most probable transmission power of wide-band code-division multiple-access handsets. A PAE of 21% at 16 dBm of output power, which is the maximum bound of the most probable transmission power in IS-95 systems, was obtained, as well as 40% at 28 dBm, the required maximum output power, with a single-chip MMIC power amplifier. The power amplifier has been devised with two InGaP-GaAs heterojunction bipolar transistor amplifying chains parallel connected, each chain being optimized for a different P/sub 1dB/ (1-dB compression point) value: one for 16 dBm for the low-power mode, targeting the most probable transmission power, and the other for 28 dBm for the high-power mode. The high-power mode operation shows 40% of PAE and -30 dBc of adjacent channel leakage power ratio (ACLR) at the maximum output power of 28 dBm. The low-power mode operation exhibits -34 dBc of ACLR at 16 dBm with 14 mA of a quiescent current. This amplifier improves power usage efficiency and, consequently, the battery lifetime of the handset by a factor of three.     

A New Approach for Built‐in Self‐Test of 4.5 to 5.5 GHz Low‐Noise Amplifiers

This paper presents a low‐cost RF parameter estimation technique using a new RF built‐in self‐test (BIST) circuit and efficient DC measurement for 4.5 to 5.5 GHz low noise amplifiers (LNAs). The BIST circuit measures gain, noise figure, input impedance, and input return loss for an LNA. The BIST circuit is designed using 0.18 μm SiGe technology. The test technique utilizes input impedance matching and output DC voltage measurements. The technique is simple and inexpensive.     

Precise Extraction of Charge Carrier Mobility for Organic Transistors

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research.     

Angular MST‐Based Topology Control for Multi‐hop Wireless Ad Hoc Networks

This letter presents an angular minimum spanning tree (AMST) algorithm for topology control in multi‐hop wireless ad hoc networks. The AMST algorithm builds up an MST for every angular sector of a given degree around each node to determine optimal transmission power for connecting to its neighbors. We demonstrate that AMST preserves both local and network‐wide connectivity. It also improves robustness to link failure and mitigates transmission power waste.