A strategy for the electro-organic synthesis of new hydrocaffeic acid derivatives

Electrochemical treatment processes can significantly contribute to the protection of the environment through the minimization of waste and toxic materials in effluents. From a pharmaceutical point of view and due to the existing resemblance between the electrochemical and biological reactions, it can be assumed that the oxidation mechanisms on the electrode and in the body share similar principles. In this paper, the application of electrochemical studies in the design of an environmentally friendly method was delineated for the new hydrocaffeic acid (HCA, 3,4-dihydroxy hydrocinnamic acid) derivatives synthesis at carbon electrodes in an undivided cell. In this cell, the EC mechanism reaction was involved, comprising two steps alternatively; (1) electrochemical oxidation and (2) chemical reaction. In particular, the electro-organic reactions of HCA, an important biological molecule, were studied in a water–acetonitrile (90:10 v/v) mixture in the presence of benzenesulfinic acid (3) and p-toluenesulfinic acid (4). The research included the use of a variety of experimental techniques, such as cyclic voltammetry, controlled-potential electrolysis and product spectroscopic identification.     

Improving Voice‐Service Support in Cognitive Radio Networks

Voice service is very demanding in cognitive radio networks (CRNs). The available spectrum in a CRN for CR users varies owing to the presence of licensed users. On the other hand, voice packets are delay sensitive and can tolerate a limited amount of delay. This makes the support of voice traffic in a CRN a complicated task that can be achieved by devising necessary considerations regarding the various network functionalities. In this paper, the support of secondary voice users in a CRN is investigated. First, a novel packet scheduling scheme that can provide the required quality of service (QoS) to voice users is proposed. The proposed scheme utilizes the maximum packet transmission rate for secondary voice users by assigning each secondary user the channel with the best level of quality. Furthermore, an analytical framework developed for a performance analysis of the system, is described in which the effect of erroneous spectrum sensing on the performance of secondary voice users is also taken into account. The QoS parameters of secondary voice users, which were obtained analytically, are also detailed. The analytical results were verified through the simulation, and will provide helpful insight in supporting voice services in a CRN.     

Generalized Gabor filters for palmprint recognition

Orientation-based coding approaches have recently been widely employed for face and palmprint recognition where generally, one starts with a set of Gabor filters to extract orientation information and then proceeds to code dominant orientations as features for each point of the palmprint. However, as the Gabor filter is developed to model two-dimensional receptive fields of simple cells in straits cortex, it might not be our best choice when dealing with curved and complex structures inherent in the palmprint texture. Motivated by this intuition, this paper shows that Gabor filters are a subset of a bigger family of filters which we refer to as generalized Gabor filter (GGF). Depending on the values of its parameters, a GGF takes a rather diverse shapes and orientations, which results in a potentially finer feature extraction capability. We show this improved capability by employing GGFs in the palmprint verification process. In applying our method, two different sub-banks of GGFs are defined for the orientation-based feature extraction of palmprints, and when compared with Gabor filters, it will be shown that GGFs have the upper hand in capturing orientation features. Furthermore, compared with the competitive code—one of the well-known orientation-based coding methods—the number of employed orientations is reduced to half. This would automatically compensate for a double usage of the filter banks, which otherwise could increase the time complexity of using GGFs. These ideas are further elaborated using a set of experiments on PolyU II and PolyU 2D/3D palmprint databases. The results show the preeminence of using GGFs both in terms of accuracy and efficiency.     

Oxovanadium(IV) salicylidene Schiff base complex anchored on mesoporous silica MCM-41 as hybrid materials: a robust catalyst for the oxidation of sulfides

Oxovanadium(IV) Schiff base complex have been anchored onto the surface of purely siliceous MCM-41 and tested for its activity as catalyst for the oxidation of sulfides. This catalyst could alter this oxidation reaction extremity, exhibiting excellent yields with 100 % selectivity. The intercalation of the complex inside the silica matrix was supported by various characterization techniques like X-ray diffraction, differential thermogravimetric (TG-DTA), BET measurements, UV–Vis diffuse reflectance spectroscopy and Fourier transform infrared spectroscopy (FT-IR). The stability of the catalyst during the course of the reaction was confirmed from its post catalytic FT-IR and XRD analysis. The catalyst could be reused five times without notable loss of its catalytic activity and efficiency which indicates that the metal-Schiff base moiety is intact and the coordination environments are not altered during the reaction.     

Effective gas separation through graphene oxide containing mixed matrix membranes

In the present study, graphene oxide (GO) was incorporated into poly(vinylidene fluoride) (PVDF) and chemically modified PVDF (M‐PVDF) to prepare mixed matrix membranes (MMMs) for gas separation application. Performed analyses proved appropriate dispersion of exfoliated GO sheets in polymer matrices and sufficient compatibility at the interfacial phases. M‐PVDF based MMMs were thermally and mechanically more stable relative to the PVDF‐based MMMs. The oxygen containing functional groups in M‐PVDF was probably the main reason for this more stability. PVDF/GO MMMs rendered low gas permeability and high selectivity. Both impermeable GO sheets and crystalline phases of PVDF were responsible for such behavior. On the other hand, interestingly gas permeability of M‐PVDF/GO MMMs was enhanced while no substantial decline was recorded in gas selectivity. For instance, He and CO₂ permeability was increased 12.46% and 25.89%, respectively, compared to the pure PVDF membrane. This behavior originated from functional groups of M‐PVDF and the interaction of these groups with GO sheets. Since GO often amplified gas barrier properties of polymers, such increscent would be appreciable. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46271.     

Statistical optimization for oxidation of ethyl benzene over Co-Mn/SBA-15 catalyst by Box-Behnken design

A series of cobalt and manganese catalysts supported on SBA-15 with different loading of Mn⁺² and Co⁺² were synthesized. These samples were characterized by SEM and XRD techniques. The catalytic activity of these samples was evaluated in the oxidation of ethylbenzene (EB) to produce acetophenone (AP) and benzoic acid (BA) in the liquid phase using tert-butylhydroperoxide (TBHP) as an oxidant. The effects of Co-Mn loading, TBHP: EB molar ratio and temperature on acetophenone and benzoic acid yields were studied by Box-Behnken experimental design to optimize the production of acetophenone and benzoic acid in liquid system.     

Preparation of the γ-Al2O3/PANI nanocomposite via enzymatic polymerization

Peroxidase-catalyzed template-guided polymerization of aniline in the presence of γ- alumina nanosheet (NS) particles have been carried out in aqueous media and γ-Al₂O₃/PANI nanocomposite was obtained. The polymerization of aniline occurred in aqueous solution in the presence of SPS (sulfonated polystyrene) as a template and SDS (sodium dodecyl sulfate) as a surfactant. Both obtained nanocomposites were comparable by SEM images. It was demonstrated that the γ-Al₂O₃ NS/PANI-SPS nanocomposite has higher conductivity and the γ-Al₂O₃ NS/PANI-SDS nanocomposite has higher void areas. The higher conductivity of γ-Al₂O₃ NS/PANI-SPS nanocomposite is attributed to the higher coated areas of γ-Al₂O₃ NS during polymerization in comparison with γ-Al₂O₃ NS/PANI-SDS which are not coated efficiently as the former. The FT-IR studies showed that the γ-Al₂O₃ NS/PANI nanocomposite was formed by interaction of the polyaniline (PANI) and γ-Al₂O₃ NS. FTIR also showed that the amount of PANI in γ-Al₂O₃ NS/PANI-SPS is more than in γ-Al₂O₃ NS/PANI-SDS. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Characterization and microstructure study of low‐density polyethylene by Fourier transform infrared spectroscopy and temperature rising elution fractionation

Infrared spectroscopy is a powerful technique for studying the microstructure and determining the short‐chain branch distribution of polyethylene. In this work, the types and amounts of short‐chain branches in low‐density polyethylene were investigated with Fourier transform infrared spectroscopy, and a new and simple method for the determination of butyl short branches was discovered. The amount of each unsaturated species in low‐density polyethylene was also determined with Fourier transform infrared after the bromination of samples. Furthermore, the resin was fractionated by preparative temperature rising elution fractionation, and the branch distribution and melting endotherm of each fraction were analyzed with attenuated total reflectance/Fourier transform infrared and differential scanning calorimetry. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Substrate and Process Parameters on the Gas-Substrate Convective Heat Transfer Coefficient During Cold Spraying

The final quality of cold-sprayed coatings can be significantly influenced by gas-substrate heat exchange, due to the dependence of the deposition efficiency of the particles on the substrate temperature distribution. In this study, the effect of the air temperature and pressure, as process parameters, and surface roughness and thickness, as substrate parameters, on the convective heat transfer coefficient of the impinging air jet was investigated. A low-pressure cold spraying unit was used to generate a compressed air jet that impinged on a flat substrate. A comprehensive mathematical model was developed and coupled with experimental data to estimate the heat transfer coefficient and the surface temperature of the substrate. The effect of the air total temperature and pressure on the heat transfer coefficient was studied. It was found that increasing the total pressure would increase the Nusselt number of the impinging air jet, while total temperature of the air jet had negligible effect on the Nusslet number. It was further found that increasing the roughness of the substrate enhanced the heat exchange between the impinging air jet and the substrate. As a result, higher surface temperatures on the rough substrate were measured. The study of the effect of the substrate thickness on the heat transfer coefficient showed that the Nusselt number that was predicted by the model was independent of the thickness of the substrate. The surface temperature profile, however, decreased in increasing radial distances from the stagnation point of the impinging jet as the thickness of the substrate increased. The results of the current study were aimed to inform on the influence and effect of substrate and process parameters on the gas-substrate heat exchange and the surface temperature of the substrate on the final quality of cold-sprayed coatings.     

Electrodeposition of nickel oxide nanoparticles on glassy carbon surfaces: application to the direct electron transfer of tyrosinase

This work describes the performance of a tyrosinase/nickel oxide nanoparticles/glassy carbon (Tyr/NiO NPs/GC) electrode. This electrode was prepared by first applying a NiO NPs electrochemical deposition onto the GC electrode surface and then tyrosinase immobilization was applied to the surface of electrodeposited NiO NPs. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) procedures demonstrated the existence of different NiO NP geometrical structures. These geometrical structures could lead to better immobilization of proteins on their surfaces. The copper containing enzyme tyrosinase successfully achieved electrical contact with the electrode because of the unique structural alignment of tyrosinase enzyme on the nanometer-scale nickel oxide surfaces. This method could be suitable for application to nanofabricated devices facilitating better performance. It was concluded that tyrosinase can be effectively applied to nanometer-scale nickel oxide surfaces.