排序方式: 共有49条查询结果,搜索用时 15 毫秒
1.
Zhongkai Zhao Yohanes A. Situmorang Ping An Nichaboon Chaihad Jing Wang Xiaogang Hao Guangwen Xu Abuliti Abudula Guoqing Guan 《化学工程与技术》2020,43(4):625-640
In the future, hydrogen will be an important energy carrier and industrial raw material. Catalytic steam reforming of bio-oils is a promising and economically viable technology for hydrogen production. However, during the reforming process, the catalysts are rapidly deactivated due to coke formation and sintering. Thus, maintaining the activity and stability of catalysts is the key issue in this process. Optimized operation conditions could extend the catalyst lifetime by affecting the coke morphology or promoting coke gasification. This article summarizes the recent developments in the field of catalytic steam reforming of bio-oils, focusing on the operation conditions, the properties of the catalysts, and the effects of the catalyst supports. The expected insights into the catalytic steam reforming of bio-oils will provide further guidance for hydrogen production from bio-oils. 相似文献
2.
3.
4.
柱状晶向等轴晶转变(CET)是在一定的凝固过程中必须控制的一种显微组织转变.本文针对铝合金连铸坯凝固过程中柱状晶向等轴晶的转变,综合运用了正交试验研究、数值模拟计算、数学拟合等方法,分析了连铸过程主要工艺因素拉坯速度、一冷水量、二冷水量和浇注温度对连铸坯凝固过程中柱状晶向等轴晶转变位置的影响,提出了柱状晶向等轴晶转变的转变位置判据,即当连铸坯某一位置处的固相率等于0.3时,温度梯度G与冷却速度R满足函数关系G0.8072/R=0.469时,在该位置处将发生柱状晶向等轴晶的转变. 相似文献
5.
Treatment of solidification latent heat is a key point in solidification simulation by the finite difference method. When latent heat is dealt with in a traditional method of equivalent latent heat, it was found that heat was increased when casting with a high cooling rate, and then the simulation result was distorted. In this paper, a new method is proposed to deal with solidification latent heat. Moreover, a mathematical model was suggested, in which the latent heat can be dealt with accurately under high or normal cooling rates. By contrasting the simulation results from this new method with the traditional one, it was indicated that this new model can obtain more accurate simulation results than the traditional model under high or normal cooling rates. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(2): 115–121, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20104 相似文献
6.
7.
An energy analysis of three typical solid oxide fuel cell (SOFC) power systems fed by methane is carried out with detailed thermodynamic model. Simple SOFC system, hybrid SOFC‐gas turbine (GT) power system, and SOFC‐GT‐steam turbine (ST) power system are compared. The influences of air ratio and operative pressure on the performance of SOFC power systems are investigated. The net system electric efficiency and cogeneration efficiency of these power systems are given by the calculation model. The results show that internal reforming SOFC power system can achieve an electrical efficiency of more than 49% and a system cogeneration efficiency including waste heat recovery of 77%. For SOFC‐GT system, the electrical efficiency and cogeneration efficiency are 61% and 80%, respectively. Although SOFC‐GT‐ST system is more complicated and has high investment costs, the electrical efficiency of it is close to that of SOFC‐GT system. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
8.
9.
对采用不同型式流场的PEMFC进行建模,并用控制容积法对控制方程进行离散,求解得到PEMFC内部各物理量的分布以及综合水拖带系数、质子交换膜平均电导率等。分析了采用交趾型流场和常规流场时PEMFC的内部传质以及阴极性能、电池性能和膜性能,结果认为采用交趾型流场时,PEMFC阴极性能高于采用常规流场的PEMFC阴极性能,但质子交换膜的平均电导率低于采用常规流场时。在没有液态水产生时常规流场PEMFC性能高于交趾型流场PEMFC。 相似文献
10.
液化石油气是一种成分复杂的混合物,这就大大增加了对其爆炸进行数值计算的难度。采用CFD(Computational Fluid Dynamics,计算流体力学)方法,对石油气的混合成分进行了简化处理,进而对石油气爆炸进行了数值模拟,建立了描述液化石油气爆燃的理论模型,采用SIMPLE算法对模型进行了求解。计算的超压与实验值相比较,球形容器内最大偏差为9.09%,平均偏差为4.58%;开敞空间情况下,最大偏差9.02%,平均偏差3.92%。还对工业上可能产生的液化石油气可燃气云爆燃威力进行了预测,当气云半径为100 m时,最大超压可达48.432 kPa。研究表明,大尺寸气云可以产生具有破坏力的超压。 相似文献