Assessing continuous bivariate effects among different groups through nonparametric regression models: An application to breast cancer detection

In many applications, the joint effect of two continuous covariates on the target binary response may vary across groups defined by levels of a given factor. A testing procedure that would enable this type of surface-by-factor interactions to be detected has been designed. To accomplish this goal, a logistic generalized additive model (GAM) with bivariate continuous interactions varying across groups defined by levels of a factor is considered. A local scoring algorithm based on local linear kernel smoothers was implemented to estimate the proposed logistic GAM. Bootstrap resampling techniques were used for the purpose of testing for factor-by-surface interactions. Given the high computational cost involved, binning techniques were used to speed up computation in the estimation and testing processes. The adequacy of the bootstrap-based test was assessed by means of a simulation study. If a factor-by-surface interaction is detected in the model, it is then established that the use of the odds-ratio curves is very useful in obtaining a direct interpretation of the fitted model. The benefits of using this methodology when analyzing real data are illustrated by applying the technique to the outputs produced by a computerized system dedicated to the early detection of breast cancer.     

Standardizing formats of corporate source data

This paper describe an approach for improving the data quality of corporate sources when databases are used for bibliometric purposes. Research management relies on bibliographic databases and citation index systems as analytical tools, yet the raw resources for bibliometric studies are plagued by a lack of consistency in fied formatting for institution data. The present contribution puts forth a Natural Language Processing (NLP)-oriented method for the identification of the structures guiding corporate data and their mapping into a standardized format. The proposed unification process is based on the definition of address patterns and the ensuing application of Enhanced Finite-State Transducers (E-FST). Our procedure was tested on address formats downloaded from the INSPEC, MEDLINE and CAB Abstracts. The results demonstrate the helpfulness of the method as long as close control of errors is exercised as far as the formats to be unified. The computational efficacy of the model is noteworthy, due to the fact that it is firmly guided by the definition of data in the application domain.     

Effect of Crude Oil Composition and Blending on Flowing Properties

The effect of crude oil n-paraffin molecular weight distribution on wax crystallization risk was studied. Sixteen highly paraffinic crude oils from Eastern Venezuela were characterized, in terms of hydrocarbon family distribution, by High Temperature Simulate Distillation (HTSD), Gel Permeation Chromatography (GPC), and wax content. n-Paraffin chain length was correlated with crude oil cloud point and pour point. It was demonstrated that high molecular weight linear paraffins are responsible for crude oil wax precipitation. A quantitative correlation between molecular weight distribution and crude oil flowing properties was also obtained. It was found that the wider the molecular weight distribution, the lower is the wax crystallization risk. Blends of different paraffinic crude oils were prepared and their flowing properties were evaluated in comparison with the original crudes. Cloud points below the mean value were obtained. In some cases, a synergistic effect was observed (cloud points below the minimum of the two crude oils). Blends of some of these crudes with condensates afforded improvements on crude oil flow and a reduction of wax crystallization tendency (cloud point). This phenomenon can be attributed to a combination of two factors: I. increases in C24-n-paraffins, and II. a wider molecular weight distribution.     

Influence of two-step process and of different stoichiometric ratios on morphologies generated in castor oil epoxy resins

Phase separation during polymerization was studied in a model system consisting of a diepoxide based on diglycidyl ether of bisphenol A (DGEBA), variable amounts of ethylenediamine (EDA) and the mass of castor oil (CO) necessary to obtain a mass fraction equal to 0-15 in a final system where the stoichiometric ratio of amine to epoxy equivalents, r, was equal to 1. A two-step polymerization process was performed by curing first a system with r = 0-5, during variable times before phase separation, and then carrying the system to r = 1. Thermodynamic analysis of samples with different r values led to a linear relationship between the Flory-Huggins interaction parameter and r. The concentration (P) and average size (D?) of dispersed-phase particles followed opposite trends, i.e. P increased while D? decreased, when either r was increased or the time of curing in the first step of a two-step process was decreased. This was explained by assuming that the competition between nucleation and growth was determined by the viscosity at the cloud point, η_cp. Low values of η_cp favoured growth over nucleation and led to fewer but larger particles.     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

A new method for the determination of wax precipitation from non-diluted crude oils by fractional precipitation

Wax precipitation is one of the most important flow assurance problems. Unfortunately, experimental data are very scarce to confirm existing models for prediction of such precipitation problem. This work reports a new experimental method. Multistage fractional wax precipitation was carried out by decreasing the temperature of crude oil. No solvent dilution was used, so the effect of solvent on temperature wax precipitation was avoided. The reproducibility of the method was tested with comparable results. The precipitation curve and the wax appearance temperature were obtained for two crude oils with different chemical nature using the reported method.     

Potential applications of poly(vinyl alcohol)‐congo red aqueous solutions and hydrogels as liquids for hydraulic fracturing

The authors report on the viscoelastic characterization of guar hydrogels obtained through complexation reactions with borax ions. These gels are compared with hydrogels obtained from poly(vinyl alcohol) of different degree of hydrolysis through complexation reactions with congo red. The effect of the degree of hydrolysis and both, the concentration of PVA and the concentration of congo red, on the viscoelastic properties of the hydrogels is analyzed. The potential use of the PVA‐based hydrogels as hydraulic fracturing liquids is discussed in relation to the commonly used fracturing liquid based on the guar–borax system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mixtures of tertiary amine functionalized azo-containing mesogens with acid-functionalized polymers

A tertiary amine functionalized 4-nitro-4′-alkoxy azobenzene mesogen with a 10 or 12 carbon spacer (azo-nN) was synthesized and complexed in equimolar proportions with poly(acrylic acid) (PA-H) and poly(sulfonic acid) (PSS-H), and investigated by thermogravimetric analysis, differential scanning calorimetry, polarizing optical microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. The neat azo-nN is characterized by a partial bilayer S_A mesophase at higher temperatures, and a highly ordered phase, in which the molecules are stacked orthogonally in bilayers, at lower temperatures. As supported by infrared analysis, for the azo-nN/PA-H mixture, the complexation is partial while for the same azo-nN/PSS-H mixture, complete proton transfer occurs. When the azo-nN is blended with the PA-H, regarded as a weak acid, a biphasic system is generated and the thermotropic behavior of neat mesogen is not significantly affected. In contrast, by mixing the same mesogen with a PSS-H (regarded as a strong acid), the thermotropic behavior is significantly influenced: the complexation generated a partial or interdigitated smectic A or tilted smectic C lamellar phase.