Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

Carbonaceous adsorbents from sewage sludge and their application in a combined activated sludge-powdered activated carbon (AS-PAC) treatment

In this study, waste biological sludge is converted to an adsorbent by chemical activation with sulphuric acid. The adsorbent obtained is then applied to the aerated vessel of an activated sludge process treating glucose and phenol to improve the quality of the treated effluent. The sludge-based carbonaceous adsorbent was found to be mesoporous in nature, with a good adsorption capacity for large molecular weight compounds and limited removal efficiency for smaller molecules such as phenol. The addition of carbon, either sludge-based or commercial, enhanced phenol removal from 58% to 98.7% and from 87% to 93% the organic matter removal as measured by the chemical oxygen demand (COD) when operated with feed concentrations of 100 mg phenol/l and 2500 mg COD/l. No differences were found between the activated sludge-activated carbon bench scale continuous reactors operating with either commercial or sludge-based adsorbents in spite of the higher adsorption capacity of the former. It is suggested that powdered adsorbent bioregeneration in the combined AS-PAC system may be impaired by the obstruction of pores due to bacterial growth, the effect being more important for the commercial activated carbon with a narrower pore size distribution.     

Intestinal gas dynamics and tolerance in humans

Carbohydrate-deficient-glycoprotein syndrome type 1 (CDG1; also known as "Jaeken syndrome") is an autosomal recessive disorder characterized by defective glycosylation. Most patients show a deficiency of phosphomannomutase (PMM), the enzyme that converts mannose 6-phosphate to mannose 1-phosphate in the synthesis of GDP-mannose. The disease is linked to chromosome 16p13, and mutations have recently been identified in the PMM2 gene in CDG1 patients with a PMM deficiency (CDG1A). The availability of the genomic sequences of PMM2 allowed us to screen for mutations in 56 CDG1 patients from different geographic origins. By SSCP analysis and by sequencing, we identified 23 different missense mutations and 1 single-base-pair deletion. In total, mutations were found on 99% of the disease chromosomes in CDG1A patients. The R141H substitution is present on 43 of the 112 disease alleles. However, this mutation was never observed in the homozygous state, suggesting that homozygosity for these alterations is incompatible with life. On the other hand, patients were found homozygous for the D65Y and F119L mutations, which must therefore be mild mutations. One particular genotype, R141H/D188G, which is prevalent in Belgium and the Netherlands, is associated with a severe phenotype and a high mortality. Apart from this, there is only a limited relation between the genotype and the clinical phenotype.     

Insights into the Pharmacokinetics and In Vitro Cell-Based Studies of the Imidazoline I2 Receptor Ligand B06

The impact of neurodegenerative diseases (ND) is becoming unbearable for humankind due to their vast prevalence and the lack of efficacious treatments. In this scenario, we focused on imidazoline I₂ receptors (I₂-IR) that are widely distributed in the brain and are altered in patients with brain disorders. We took the challenge of modulating I₂-IR by developing structurally new molecules, in particular, a family of bicyclic α-iminophosphonates, endowed with high affinity and selectivity to these receptors. Treatment of two murine models, one for age-related cognitive decline and the other for Alzheimer’s disease (AD), with representative compound B06 ameliorated their cognitive impairment and improved their behavioural condition. Furthermore, B06 revealed beneficial in vitro ADME-Tox properties. The pharmacokinetics (PK) and metabolic profile are reported to de-risk B06 for progressing in the preclinical development. To further characterize the pharmacological properties of B06, we assessed its neuroprotective properties and beneficial effect in an in vitro model of Parkinson’s disease (PD). B06 rescued the human dopaminergic cell line SH-SY5Y from death after treatment with 6-hydroxydopamine (6-OHDA) and showed a crucial anti-inflammatory effect in a cellular model of neuroinflammation. This research reveals B06 as a putative candidate for advancing in the difficult path of drug discovery and supports the modulation of I₂-IR as a fresh approach for the therapy of ND.     

DTC Drives for Wide Speed Range Applications Using a Robust Flux-Weakening Algorithm

A control scheme for robust flux-weakening operation of direct-torque-control induction motor drive is proposed. The basic idea is to adjust the flux reference on the basis of the torque error, thus determining a spontaneous flux weakening. To exploit the maximum torque capability, it is necessary to estimate the maximum torque that the induction machine is able to generate at any speed. Initially, a basic version of the algorithm, requiring a simple off-line parameter tuning, is presented. Then, the algorithm is improved and completed with the online estimation of the maximum torque, hence avoiding the initial tuning process. The main features of the proposed methods are a little dependence on machine parameters and a smooth transition into and out of the flux-weakening operation mode. Experimental tests demonstrate the effectiveness of the control schemes.     

Organic Single Crystal Patterning Method for Micrometric Photosensors

Light detection technologies are of interest due to their applications in energy conversion and optical communications. Single-crystal organic semiconductors, such as rubrene, present high detectivities and charge carrier mobility, making them attractive for light-sensing applications. Growth of high crystallinity organic crystals is achieved using vapor processes, forming crystals of arbitrary shapes and orientations and requiring posterior patterning processes. However, patterning the organic semiconductors using industry-standard microfabrication techniques is not straightforward, as these often cause irreversible damage to the crystals. Here the fabrication of patterned micrometric rubrene photosensors is demonstrated through a combination of photolithography and Reactive Ion Etching steps. Protective layers during microfabrication minimize degradation of optoelectronic properties of the organic single crystals during fabrication. Crystals undergoing the patterning process presented a survival rate of 39%. Photoresponse values of up to 41 mA W⁻¹ are obtained under illumination at 500 nm. This opens a route for the industrial-scale fabrication process of high-performance optoelectronic devices based on organic crystals semiconductors.