Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Hydrogen absorption by Pd-coated ZrNi prepared by using Barrel-Sputtering System

To improve the durability of hydrogen storage materials against surface poisoning by impurity gases, effectiveness of Pd-coating layer prepared by using a Barrel-Sputtering System was examined for ZrNi powder. The effectiveness of Pd-coating was evaluated by activation temperature, at which Pd/ZrNi poisoned by air could be activated to absorb hydrogen. Characterization of Pd-coated ZrNi (denoted as Pd/ZrNi) by scanning electron microscopy, electron probe microanalysis and X-ray diffraction showed that a uniform Pd-coating layer was formed with the barrel-sputtering system. It was found that the poisoned Pd/ZrNi sample could be activated even at 423 K to absorb hydrogen at room temperature. This exhibits remarkable contrast to bare ZrNi, which could be only activated appreciably above 1073 K. It is concluded that the Pd-coating by barrel sputtering is quite effective to avoid the effect of surface poisoning of powdery hydrogen storage materials. However, the activation at excessively high temperature resulted in the loss of high activity to absorb hydrogen. It was concluded that this phenomenon was associated with reactions between Pd and ZrNi to form PdZr and other byproducts.     

A facile chemical synthesis of cholest-4-en-3-one. Carbon-13 nuclear magnetic resonance spectral properties of cholest-4-en-3-one and cholest-5-en-3-one

This paper presents a simplified method for the chemical synthesis of cholest-4-en-3-one, which is a naturally occurring steroid and a salient intermediate in steroid chemistry. Pyridinium chlorochromate (PCC) in refluxing benzene has been found to be an effective and convenient reagent for the oxidation and concomitant isomerization of cholest-5-en-3β-ol (cholesterol) to cholest-4-en-3-one in high yield. Also described are the carbon-13 nuclear magnetic resonance spectral properties of cholest-4-en-3-one and of the isolated reaction intermediate cholest-5-en-3-one. Based on a paper presented at the Symposium on Plant and Fungal Sterols: Biosynthesis Metabolism and function held at the AOCS Annual Meeting, Baltimore, MD, April 1990.     

Advanced coded-aperture imaging system for nuclear medicine

An advanced coded imaging system is described, and some results of phantom experiments are presented. The advanced method uses a pair of coherent codes (+ 1 and -1 codes) and has many advantages compared with conventional ones. One of the greatest advantages is that there are no sidelobes in the focal plane and only a few in other planes. Therefore, when an object can be regarded as two-dimensional, it is perfectly reconstructed with high detecting efficiency, and this is successfully simulated by a thyroid phantom with 99mTc. Moreover, this system has an ability to reconstruct tomograms, which is also shown by using ring phantoms piled on one another with some cold spots in their shells. From these experimental results it may be concluded that the new system is useful for practical applications, for example, to nuclear medicine.     

Functional and Structural Insights into Human PPARα/δ/γ Subtype Selectivity of Bezafibrate,Fenofibric Acid,and Pemafibrate

Among the agonists against three peroxisome proliferator-activated receptor (PPAR) subtypes, those against PPARα (fibrates) and PPARγ (glitazones) are currently used to treat dyslipidemia and type 2 diabetes, respectively, whereas PPARδ agonists are expected to be the next-generation metabolic disease drug. In addition, some dual/pan PPAR agonists are currently being investigated via clinical trials as one of the first curative drugs against nonalcoholic fatty liver disease (NAFLD). Because PPARα/δ/γ share considerable amino acid identity and three-dimensional structures, especially in ligand-binding domains (LBDs), clinically approved fibrates, such as bezafibrate, fenofibric acid, and pemafibrate, could also act on PPARδ/γ when used as anti-NAFLD drugs. Therefore, this study examined their PPARα/δ/γ selectivity using three independent assays—a dual luciferase-based GAL4 transactivation assay for COS-7 cells, time-resolved fluorescence resonance energy transfer-based coactivator recruitment assay, and circular dichroism spectroscopy-based thermostability assay. Although the efficacy and efficiency highly varied between agonists, assay types, and PPAR subtypes, the three fibrates, except fenofibric acid that did not affect PPARδ-mediated transactivation and coactivator recruitment, activated all PPAR subtypes in those assays. Furthermore, we aimed to obtain cocrystal structures of PPARδ/γ-LBD and the three fibrates via X-ray diffraction and versatile crystallization methods, which we recently used to obtain 34 structures of PPARα-LBD cocrystallized with 17 ligands, including the fibrates. We herein reveal five novel high-resolution structures of PPARδ/γ–bezafibrate, PPARγ–fenofibric acid, and PPARδ/γ–pemafibrate, thereby providing the molecular basis for their application beyond dyslipidemia treatment.     

A Low-Power Low-Voltage 10-bit 100-MSample/s Pipeline A/D Converter Using Capacitance Coupling Techniques

This paper presents a low-power low-voltage 10-bit 100-MSample/s pipeline analog-to-digital converter (ADC) using capacitance coupling techniques. A capacitance coupling sample-and-hold stage achieves high SFDR with 1.0-V supply voltage at a high sampling rate. A capacitance coupling folded-cascode amplifier effectively saves the power consumption of the gain stages of the ADC in a 90-nm digital CMOS technology. The SNDR and the SFDR are 55.3 dB and 71.5 dB, respectively, and the power consumption is 33 mW     

AN-1071应用指南——D类功放基础（一）

如果我们在选择器件时很谨慎，并且考虑到精细的设计布线，因为杂散参数有很大的影响，那么目前高效D类功放可以提供和传统的AB类功放类似的性能。半导体技术不断创新使得效率提高，功率密度增加和较好的音响效果，增加了D类功放的运用。     

Reduction of wave propagation loss by mesh in rectangular tunnels

The reduction of radio wave attenuation in rectangular tunnels is discussed. The attenuation of the dominant mode due to its field penetration into a lossy dielectric wall is reduced by means of the attachment of wire netting (mesh). First, a reflection coefficient from a mesh screen over a lossy surface is analytically evaluated. Then, based on a geometrical optical approach to the propagation model in tunnels, the attenuation of the dominant mode in a rectangular tunnel is derived using the reflection coefficient. The calculated attenuation constants are in good agreement with experimental ones obtained in a laboratory. Finally, the efficiency of attenuation reduction rate by the mesh shielding method is summarized as a function of spatial ratio of the mesh wire interval divided by the wavelength. It is shown that the efficiency of reduction rate by mesh is significant     

Destruction of volatile organic compounds used in a semiconductorindustry by a capillary tube discharge reactor

Nonthermal plasma technologies offer an innovative approach to the problem of decomposing various volatile organic compounds (VOCs). The authors focused on DC capillary tube discharge plasma reactors to study the decomposition/destruction efficiency for toluene, EGM, trichloroethane and trichloroethylene at 50-2300 ppm levels in dry air. The effects of gas flow rate, VOC concentration and reactor operating conditions on decomposition and analysis of reactant conversion for each VOC were investigated. The results show that VOC destruction efficiency as high as 90% can be achieved, even under a short residence time (3.8 ms) with a destruction energy efficiency of up to 95 g (VOC)/kWh. Laboratory-scale plasma technology was successfully demonstrated for its potential application for VOC control in the semiconductor clean-room environment