Nonlinearity analysis and optimization of HBTs for optical mixer designs

Two types of photo heterojunction bipolar transistor (HBT) to directly down-convert optical signals to electronic signals have been reported in the literature: a conventional photo-HBT in which light penetrates through the area of the base-collector junction and an HBT where light shines through the base-collector edge for higher conversion efficiency. Although the performance in relation to bias conditions has been published, the detailed analyses for identifying the parameters and bias conditions that provide optimum direct down-conversion have not been examined. This paper provides a full explanation of the operation of the down-conversion for both HBT configurations based on low-frequency analyses. Such information is useful for both understanding the nonlinear mechanisms involved and designing for maximum efficiency. In addition, a new circuit has been developed from the basic HBT down-conversion circuit that provides improved performance.     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

Polygonal approximation for image segmentation

A new learning model for real-time, grey-level image segmentation is presented. The model gives excellent results for images with different shapes.     

Surface modification of starch nanocrystals through ring‐opening polymerization of ε‐caprolactone and investigation of their microstructures

Bionanoparticles of starch obtained by submitting native potato starch granules to acid hydrolysis conditions. The resulted starch nanoparticles were used as core or macro initiator for polymerization of ε‐caprolactone (CL). Starch nanoparticle‐g‐polycaprolactone was synthesized through ring‐opening polymerization (ROP) of CL in the presence of Sn(Oct)₂ as initiator. The detailed microstructure of the resulted copolymer was characterized with NMR spectroscopy. Thermal characteristic of the copolymer was investigated using DSC and TGA. By introducing PCL, the range of melting temperature for starch was increased and degradation of copolymer occurred in a broader region. X‐ray diffraction and TEM micrographs confirmed that there was no alteration of starch crystalline structure and morphology of nanoparticles, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

New fire‐protective intumescent coatings for wood

Polyurethane coatings are highly flammable, and because of their widespread applications on different substrates (wood, steel, and building materials), there is a need to increase their fire‐safety properties. Intumescent additives sharply suppress the flammability properties of polyurethane coatings. Two problems accompany intumescent additives: their high loading percentage and incompatibility with polyurethane coatings. In this research, we succeeded in increasing the compatibility by mixing intumescent additives with a butyl acrylate polymer and in lowering the flame‐retardant additive loading (up to 20%) by incorporating newly modified montmorillonite. The flammability properties of the new intumescent coatings were characterized with a cone calorimeter. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003     

Monitoring web services’ quality of service: a literature review

Monitoring Quality of Service (QoS) compliance is an important procedure in web service environment. It determines whether users’ expectations are met, and becomes the vital factor for them to decide whether to continue paying for the service or not. The monitoring is performed by checking the actual services performance against the QoS stated in Service Level Agreement (SLA). In relation to that, the need for monitoring vague QoS specifications in SLA has become more apparent nowadays. This paper reviews the published literature on web services QoS monitoring. A total of 60 selected articles were systematically analyzed. There were 23 of the articles selected through restrictive search criteria while the other 37 were selected based on unrestrictive search criteria. The review shows that little evidence exists on monitoring vague QoS specifications of web services. Providing ability for monitoring QoS that is specified vaguely in SLA could give new insights and implications to web services field. This paper concludes with some recommended future works to construct the theory and perform the empirical research.     

Effect of Dyebath Additives on Decolorization Efficiency in the Ozonation of Dyehouse Effluent

It is necessary to study the effect of dyebath additives on decolorization efficiency in order to optimize ozone-based decolorization processes as the consumption of ozone can be reduced through selecting ozone favorable additives. The effect of 5 dyebath additives viz. electrolytes (sodium chloride and sodium sulfate), chelating agent (ethylene diamine tetra acetic acid or EDTA), reducing agent (sodium dithionite), optical brightener (Uvitex BHT), and dispersing agent (Zetex DNVL) was investigated. All of the additives showed synergistic effect as addition of sodium chloride, sodium dithionite and Zetex DN-VL markedly improved decolorization efficiency, but EDTA and optical brightener showed negative effect. Sodium sulfate did not show any positive or negative effect on decolorization efficiency.