Cavity-Backed Miniature Wideband UHF Circular Polarized Antenna With Textured Dielectrics

Use of high permittivity dielectrics with antennas is known to reduce their operating frequency but also introduces side effects such as reduced gain and bandwidth. This paper presents a miniaturization scheme for a 15 cm (6 inch) square circularly polarized (CP), cavity-backed antenna using textured dielectric loading and a folded metallic strip feed. The proposed design has an operational frequency f, around 500 MHz implying a linear size of 0.25lambda₀. The challenge in designing such a small size antenna is to increase bandwidth (10-15%) while retaining a gain of 2-4 dBi. By carefully positioning high permittivity textured dielectrics within the aperture in conjunction with shape design, we show that bandwidth and gain are retained as compared to comparable size antennas in the literature. As part of our design, we present parametric studies through computer simulations and a prototype antenna is fabricated and measured for verification     

DEPP functionally graded piezoceramics via micro-fabrication by co-extrusion

This paper introduces the Dual Electro/Piezo Property (DEPP) gradient technique via Micro-Fabrication through Co-eXtrusion (MFCX) which pairs a high displacement lead zirconate titanate (PZT) piezoceramic with a high permittivity barium titanate (BT) dielectric. By grading with this material combination spatially across an actuator, the electric field is concentrated in the more active region for improved efficiency, higher displacements, and complex motions. To aid in synthesis and analysis of any gradient profile, compositional maps are provided for key material properties (density, stiffness, permittivity, and piezoelectric coefficients). The DEPP technique was validated, independent of the MFCX process, by powder pressing a conventional bimodal gradient beam which demonstrated through experiments high displacement capabilities at lower driving potentials than comparable functionally graded piezoceramic actuators. For more complex gradients, the MFCX process was adapted to the DEPP gradient technique and illustrated by the fabrication of a linearly graded prototype whose monolithic nature and gradual material variation significantly reduces internal stresses, improves reliability, and extends service lifetime.     

Effect of Oxidation on Mechanical Properties of Fibrous Monolith Si3N4/BN at Elevated Temperatures in Air

The oxidation behavior and its effect on the mechanical properties of fibrous monolith Si₃N₄/BN after exposure to air at temperatures ranging from 1000° to 1400°C for up to 20 h were investigated. After exposure at 1000°C, only the BN cell boundary was oxidized, forming a B₂O₃ liquid phase. With increasing exposure temperature, the Si₃N₄ cells began to oxidize, forming crystalline Y₂Si₂O₇, SiO₂, and silicate glass. However, in this case, a weight loss was observed due to extensive vaporization of the B₂O₃ liquid. After exposure at 1400°C, large Y₂Si₂O₇ crystals with a glassy phase formed near the BN cell boundaries. The oxidation behavior significantly affected the mechanical properties of the fibrous monolith. The flexural strength and work-of-fracture decreased with increasing exposure temperature, while the noncatastrophic failure was maintained.     

Microstress in Reaction‐Bonded SiC from Crystallization Expansion of Silicon

Microstress in reaction‐bonded silicon carbide (RBSiC) has been measured using piezo‐Raman spectroscopy. Compressive microstresses as high as 2 GPa exist in the silicon phase and tensile microstresses as high as 2.3 GPa exist in the SiC phase of RBSiC. This is much larger than expected for thermoelastic microstress from coefficient of thermal expansion mismatch would provide. Instead the microstresses arise from the crystallization of liquid silicon. During the reaction bonding process, not all of the silicon reacts to form SiC and there is liquid free silicon. The phase transformation of the free silicon from liquid to solid has a large volume expansion, which results in large residual microstress within the silicon and SiC phases of RBSiC.     

Volatiles from Intact and Lygus-Damaged Erigeron annuus (L.) Pers. are Highly Attractive to Ovipositing Lygus and its Parasitoid Peristenus relictus Ruthe

Trap cropping and biological control can provide a sustainable means of controlling insect pests. Insects in the genus Lygus (Hemiptera: Miridae) are major pests on cotton and horticultural crops throughout the United States, and pesticide resistance within Lygus populations necessitates more sustainable long-term management techniques. Here, we explore behavioral responses of Lygus bugs (L. rubrosignatus Knight) and an introduced parasitoid, Peristenus relictus (Hymenoptera: Braconidae), to a common field edge plant, Erigeron annuus, which has the potential to serve as a trap host. Erigeron annuus is attractive to Lygus in the field, with Lygus preferentially moving to Erigeron patches compared to more abundant cotton plants. To determine the role of odor cues in mediating this attraction, we collected volatiles from E. annuus with and without Lygus damage, and then tested the attractiveness of these volatiles vs. those of cotton to Lygus females and female P. relictus wasps using Y-tube and wind tunnel bioassays. We found that undamaged E. annuus emits high concentrations of a complex volatile blend (60+ compounds), with novel compounds induced and constitutive compounds up-regulated in response to damage. Additionally, both female Lygus bugs and female P. relictus wasps are highly attracted to E. annuus volatiles over those of cotton in almost every combination of damage treatments. Our results suggest that Erigeron annuus would be an effective trap plant to control Lygus in cotton, since it is highly attractive to both the pest and its natural enemy.     

Radical depletion model for intensity effects on photopolymerization

Photopolymerization behavior of suspensions based on monomers is determined by the curing kinetics of the monomer, the concentration of photoactives such as photoinitiator, inert dye or inhibitor, and the conditions of polymerization such as light intensity. We present a Radical depletion model, an extended Inhibitor exhaustion model, in terms of minimum light intensity that is required for initiation of the photopolymerization. The validity of this model was tested on a series of (meth)acrylate suspensions with varying the photoactives concentration in the intensity range ～8–40 mW/cm².     

A Symmetrical Diester as the Sex Attractant Pheromone of the North American Click Beetle Parallelostethus attenuatus (Say) (Coleoptera: Elateridae)

Hexanoic acid, 1-octanol, 1,8-octanediol, octyl hexanoate, 1,8-octanediol monohexanoate, and 1,8-octanediol dihexanoate were identified in headspace volatiles collected from the crushed abdomen of a female click beetle of the species Parallelostethus attenuatus (Say) (Elaterinae, tribe Elaterini). In field trials carried out in Illinois, South Carolina, North Carolina, and Virginia, adult male beetles were strongly attracted to 1,8-octanediol dihexanoate alone. Blends of the dihexanoate with one or more of the other compounds proved to be less attractive than the dihexanoate alone, suggesting that the pheromone of this species may consist of a single compound. The symmetrical diester structure of the pheromone is a novel natural product and appears to be structurally unique among insect pheromones.

     

Mode I Fracture Toughness of a Small-Grained Silicon Nitride: Orientation, Temperature, and Crack Length Effects

The Mode I fracture toughness ( K _{I C} ) of a small-grained Si₃N₄ was determined as a function of hot-pressing orientation, temperature, testing atmosphere, and crack length using the single-edge precracked beam method. The diameter of the Si₃N₄ grains was <0.4 µm, with aspect ratios of 2–8. K _{I C} at 25°C was 6.6 ± 0.2 and 5.9 ± 0.1 MPa·m^1/2 for the T–S and T–L orientations, respectively. This difference was attributed to the amount of elongated grains in the plane of crack growth. For both orientations, a continual decrease in K _IC was observed through 1200°C, to ∼4.1 MPa·m^1/2, before increasing rapidly to 7.5–8 MPa·m^1/2 at 1300°C. The decrease in K _IC through 1200°C was a result of grain-boundary glassy phase softening. At 1300°C, reorientation of elongated grains in the direction of the applied load was suggested to explain the large increase in K _IC. Crack healing was observed in specimens annealed in air. No R -curve behavior was observed for crack lengths as short as 300 µm at either 25° or 1000°C.     

Automated verification of code automatically generated from Simulink®

The CLawZ toolset independently and automatically proves the correctness of code automatically generated by a commercial auto-code generator for the Simulink^® modelling language. The use of formal methods is invisible to the user and it has been shown to lead to faster development of correct code. The CLawZ toolset has been continually developed and used for over a decade to prove the correctness of embedded real time safety critical software for Eurofighter Typhoon. The only requirement on the commercial auto-coder is that it provides traceability information between the signal wires in a Simulink^® model and the program variables that implement them.