The effect of Cu-rich sub-layer on the increased corrosion resistance of Cu-xZn alloys in chloride containing borate buffer

The electrochemical behaviour of Cu-xZn alloys, as well as their constituent metals, in a borate buffer containing chloride ions in the molar range from 0.01 to 1 M are studied. Characteristics of these materials under anodic polarization are compared and the composition and morphology of the corrosion products formed in the course of polarization experiment are analysed by SEM and EDS. X-ray photoelectron spectroscopy and electrochemical impedance measurements are used for characterization of the surface layers formed on Cu, Zn and Cu-40Zn alloy during 2-h immersion at E_oc in a borate buffer containing two different concentrations of chloride ions. New aspects of the behaviour of brass under E_oc condition are revealed. The improved corrosion resistance of brass in chloride media, if compared to zinc metal, is attributed to a Cu-rich layer formed by the selective dissolution of zinc. Based on the results, a structural model describing the improved corrosion resistance of Cu-40Zn alloy with respect to Zn metal is proposed.     

The effect of backbone fluorination on the carrier mobility in alkoxy and alkyl substituted conducting polymers of the poly(phenylenevinylene) type

Summary We report the synthesis of some new backbone fluorinated polymers of the poly(phenylenevinylene) type. The new polymers were characterised by NMR, SEC and X-ray powder diffraction. The charge carrier mobilities were determined using pulse radiolysis time resolved microwave conductivity (PR-TRMC) and the carrier mobilities were compared to the similar non-fluorinated analogues. The changes in charge carrier mobilities as a function of molecular substitution pattern is discussed in terms of other materials properties such as electronic structure and absorption properties. The major result is that it was found possible for this type of material to alter the electronic energy levels by molecular substitution without imparting significant changes in the magnitude of the charge carrier mobilities and the optical properties.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

The Danish Twin Apartment Study – Part II: Mathematical modeling of the relative strength of sources of indoor air pollution

Abstract This study deals with the modeling of air pollution in apartments from laboratory measurements of source strengths, using formaldehyde and Total Volatile Organic Compounds (TVOCs) as model pollutants. The sources in two test apartments were grouped into two: building-related sources and occupant-related sources. The measured source strengths and ventilation rates were used for the prediction of concentrations expected in the apartments. These predictions were compared to measurements in the apartment over 12 months. The conclusions were that the model predictions based on emission rates measured in the laboratory can be used to predict the long-term concentration of the two model pollutants in the apartments. Considering the measured differences in ventilation between the apartments, an occupant emission rate of between 0.2 and 0.3 mg/h/kg body weight could be estimated. Based on previous suggested limits of acceptable exposures of humans to VOCs, an acceptable average emission rate of VOCs from building materials in general was estimated to be about 30 (μ/m²/h. The modeling showed that during the first 200 days, building materials dominated the emissions. After this, sources relating to the occupants dominated. On average about half of the VOC pollution originated from the building materials.     

Identification of domains involved in superantigenicity of streptococcal pyrogenic exotoxin F (SpeF)

Coronary artery angioplasty or bypass is being performed for increasing numbers of patients in their seventh, eighth, ninth and even tenth decades of life. Because of the cost involved, justification for performing these procedures in the elderly has become a topic of daily discussion among those responsible for funding healthcare. Both silent and overt coronary artery disease (CAD) are more common in the population over 65 years of age. Because CAD in the elderly often presents in an atypical manner, diagnosis of the disease is frequently delayed. Partly because of the delayed diagnosis and partly because of cost considerations, coronary arterial bypass (CABG) is more often performed as an emergency procedure in the elderly with the results that both operative mortality and costs are increased over those observed in a younger population. Nevertheless, it is clear that performance of coronary revascularization procedures in the elderly can both prolong life and improve the quality of life beyond what can be achieved using alternative methods of treatment. Greater efforts directed toward detection of ischemic heart disease in the these patients and earlier, elective surgery could significantly reduce both the mortality and disability associated with CAD in the elderly.     

Mechanical properties of moist agglomerates in relation to granulation mechanisms part I. Deformability of moist,densified agglomerates

The mechanical properties of moist samples of fine, polydisperse powders are investigated by measuring the tensile strength by a diametrical compression test and the stress—strain relationship of samples exposed to uniaxial compression. The strengths determined by the two methods correlate well. The strength of moist samples compressed to porosities comparable to the level of intragranular porosities achieved by granulation in high-speed mixers is shown to be influenced significantly by particle interactions in addition to mobile liquid bondings. For a particular material the strength is controlled mainly by porosity and liquid saturation. It is shown that the effect of a growing liquid saturation is to reduce particle interactions and thus to facilitate densification during granulation. The deformability of moist samples, which is dependent on strength and deformation behaviour, is assessed for lactose and dicalcium phosphate.     

Molecular thermodynamics of solutions in the normal and critical regions — II. Activity coefficients for the ArN2, C2H6C2H4 and C3H6CO2 systems

Activity coefficients for the ArN₂, C₂H₆C₂H₄, and C₃H₆CO₂ systems are calculated from published vapour-liquid equilibrium compositions at various pressures and temperatures. The activity coefficients are correlated using a two parameter model based on the principles of molecular thermodynamics. The method is used both in the normal liquid and critical regions. The parameters of the model are shown to be reasonably independent of the temperature for the three systems.     

Constrained regression in chemical engineering practice

Absolute equality constraints in multiple regression are shown to introduce only minor modifications in the normal equations by a subset of the regression parameters. It is essential that these are ordered such that the subset is observable through the constraints. The constraints are shown to give greater residuals about the regression, but the precision in the parameter estimation is improved.In general power function curve fitting, a quadratically convergent iterative computation of the optimal exponents uses the normal equations as equality constraints. The correlations between the coefficients and the exponents in a sum of power functions become very high, when the number of terms increases such that their individual observability is being greatly reduced. The effect is shown to be a very poor precision in the parameter estimation and a heavy oscillation in the coefficients.The algorithms suggested are illustrated by curve fitting of some binary equilibrium data, where the relative volatility model gives a superior fit to the data.     

Simultaneous machining of parallel grooves in SnO(2) thin films using a Nd:YAG laser and a kinoform

A kinoform is used to split the beam of a Nd:YAG laser into six beams. The laser beams are, by means of optical fibers and collimating-focusing optics, transferred to the surface to be machined. Thus multiple grooves can be machined simultaneously. For demonstration, 100-μm-wide grooves are simultaneously machined into a SnO(2) thin film deposited on a glass substrate. The resulting grooves are well isolated. This result shows that the technique could be used, for example, in solar cell manufacturing to increase the efficiency of laser scribing.     

Transmission electron microscopy study of a dental gallium alloy

Analytical transmission electron microscopy (TEM) studies of a dental gallium alloy have been carried out. This commercial Ga alloy was made by triturating a Ag-Sn-Cu-rich alloy powder with a liquid Ga alloy containing Ga, In and Sn. Ga alloys are of increasing interest as an alternative to amalgam. The dental material studied in the present work was found to be a composite consisting of remaining, undissolved particles from the Ag-based alloy powder in a matrix of reaction products with the liquid Ga alloy. The phases in the matrix and the remaining Ag-based alloy particles have been identified by electron diffraction, high resolution electron microscopy and energy dispersive X-ray spectroscopy. the following phases were identified: orthorhombic Ag₃Sn, cubic -Cu₉Ga₄, cubic Ag₉In₄, tetragonal -Sn and hexagonal Ag₂Ga. In addition to these well-known phases Ga-rich regions of Cu-Ga were observed consisting of an intergrowth of the tetragonal CuGa₂ and one of the cubic -Cu₉Ga₄ phases.