A study on the growth curve of and maximum profit from layer-type cockerel chicks

Attacks by adult stages of the soft tick Argas (Argas) neghmei (Acari: Argasidae) on inhabitants of the High Andean plateau of Argentina are reported. This is the first local report of this species, which was previously found in the north of Chile. Taxonomic differences between A. (A.) neghmei and other neotropical and exotic species of the genus are underlined. The status of the knowledge about the Argentine argasid fauna is briefly described.     

The role of grain-boundary on the hydrogen-induced degradation inthin-film ferroelectric capacitors

The electrical properties of thin-film ferroelectric capacitors are known to degrade severely when exposed to hydrogen. In this study, we directly measured the effects of the grain boundary on the hydrogen-induced degradation in ferroelectric Pb(Zr, Ti)O₃ (PZT) thin films by the location of the top Pt electrode either inside the grains or at the grain boundary. A strong relationship between the grain boundary and the electrical properties of ferroelectric capacitors as a result of hydrogen annealing was found. The degradation of the electrical properties in thin-film ferroelectric capacitors after hydrogen annealing is mainly due to the presence of the grain boundary in the ferroelectric thin film     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

A Lyapunov functional approach to robust stability analysis of continuous-time uncertain linear systems in polytopic domains

In this paper, a sufficient linear matrix inequality (LMI) condition is presented for robust stability analysis of continuous-time linear time-invariant (LTI) systems in polytopic domains. The underlying idea behind the proposed approach is to introduce a family of complex functions which map the closed right-hand side of the complex plane into the inside of the closed unit circle centered at the origin. Then, the mapping properties are used to assure that all the eigenvalues of a system are located in the open left-hand side of the complex plane. Examples show the validity of the proposed condition.     

Comments on “A new robust control for a class of uncertaindiscrete-time systems”

A completed proof for a theorem on the robust controller design proposed in Wang and Ghosh (ibid. vol.43 (1997)) is presented in this paper     

A Study on the Pd/a-Si/Ni Seed Layer for Metal-Induced Lateral Crystallization and Poly-Si TFTs

The effect of Pd on the growth rate of metal-induced lateral crystallization (MILC) from Ni seed and the electrical properties of thin-film transistors (TFTs) fabricated on the films crystallized by MILC were investigated. When the Pd metal is placed on the amorphous-silicon/Ni-seed layer, the MILC growth rate is two to three times faster than that of conventional Ni-MILC, without any degradation of TFTs. These results were explained by a stress that is generated by the formation of Pd₂Si     

Microstructure and electrical properties of high power laser thermal annealing on inkjet-printed Ag films

In this work, a high power continuous-wave (CW) Nd:YAG laser was used for thermal treatment of inkjet-printed Ag films - resulting in the elimination of organic additives (dispersant, binder, and organic solvent) in the Ag ink and annealing of Ag nano-particles. By optimizing laser parameters such as laser power and defocusing value, the laser energy can be totally converted into heat energy, which is used for thermal treatment of inkjet-printed Ag films. This results in the microstructure and the resistivity of the films to be controlled. We investigated the thermal diffusion mechanisms during laser annealing and the resulting microstructures. The impact of high power laser annealing on microstructures and electrical characteristics of inkjet-printed Ag films was compared to those of the films annealed by a conventional furnace annealing. Focused ion beam (FIB) channeling images show that the laser annealed Ag films have large columnar grains and a dense void-free structure, while furnace annealed films have much smaller grains and exhibit void formation. As a result, the laser annealed films have better electrical properties (low resistivity) compared to furnace annealed samples.     

Microstructure and Electrical Properties of Low Temperature Processed Ohmic Contacts to p‐Type GaN

With Ni/Au and Pd/Au metal schemes and low temperature processing, we formed low resistance stable Ohmic contacts to p‐type GaN. Our investigation was preceded by conventional cleaning, followed by treatment in boiling HNO₃:HCl (1:3). Metallization was by thermally evaporating 30 nm Ni/15 nm Au or 25 nm Pd/15 nm Au. After heat treatment in O₂ + N₂ at various temperatures, the contacts were subsequently cooled in liquid nitrogen. Cryogenic cooling following heat treatment at 600 ·C decreased the specific contact resistance from 9.84·10^?4 Ωcm² to 2.65·10^?4 Ωcm² for the Ni/Au contacts, while this increased it from 1.80·10^?4 Ωcm² to 3.34·10^?4 Ωcm² for the Pd/Au contacts. The Ni/Au contacts showed slightly higher specific contact resistance than the Pd/Au contacts, although they were more stable than the Pd contacts. X‐ray photoelectron spectroscopy depth profiling showed the Ni contacts to be NiO followed by Au at the interface for the Ni/Au contacts, whereas the Pd/Au contacts exhibited a Pd:Au solid solution. The contacts quenched in liquid nitrogen following sintering were much more uniform under atomic force microscopy examination and gave a 3 times lower contact resistance with the Ni/Au design. Current‐voltage‐temperature analysis revealed that conduction was predominantly by thermionic field emission.