Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

Identification of barramundi (Lates calcarifer) and tilapia (Oreochromis spp.) fillets by DNA- and protein-analytical methods

Fish and fillet of barramundi (Lates calcarifer) and tilapia (Oreochromis species) obtained from wholesale and retail trade were assigned to species by sequencing of PCR products. Two segments (358 and 464?bp) of the cytochrome b gene (cytb) were amplified using universal primers. The amplicons gave characteristic patterns in SSCP-analysis (single strand conformation polymorphism) suitable for differentiation of Lates calcarifer from Lates niloticus and Lateolabrax japonicus. Intra-specific variation of sequences and SSCP patterns were observed for barramundi. In case of tilapia species, it was found to be difficult to identify samples by BLAST due to the high similarity of cytb sequences of O. niloticus, O. mossambicus, O. aureus and Sarotherodon galileus. Four different patterns of single strand DNA (ssDNA) were obtained by SSCP analysis of the 464?bp amplicon of tilapia. Different patterns of ssDNA matched to variations in sequences. Protein profiles obtained by IEF (isoelectric focusing) of water-soluble proteins from raw fillet were found to be suitable for rapid differentiation of Lates calcarifer from Lateolabrax japonicus, but the three different Oreochromis species expressed only minor differences in protein patterns. The patterns of the tilapia and barramundi species showed a number of acidic, heat-stable proteins, presumably representing parvalbumin.     

Reversible Disorder in a Room Temperature Ferromagnet

Random magnetic fields, varying from site to site in a magnetic material, are a form of disorder that can determine the local architecture and stability of the magnetic state. In a ferromagnet, the application of an external magnetic field can amplify the effects of the internal random fields and, in principle, harden a magnetic domain, without changing temperature and only for as long as the external field is present. Here, the rare‐earth compound Nd₂Fe₁₄B, formed with a granular morphology of random‐packed, elongated grains, is an experimental realization of the Random Field Ising Model in a room temperature ferromagnet. The application of magnetic fields transverse to the easy axis tunes the coupling between the structural disorder and the magnetic pinning properties. This material both illuminates the intricacies of tunable disorder and serves as a guidepost along the way to developing increased‐density magnetic storage media.     

Three‐Dimensionally Ordered Macroporous Polymeric Materials by Colloidal Crystal Templating for Reversible CO2 Capture

The design and preparation of porous materials with controlled structures and functionalities is crucial to a variety of absorption‐ or separation‐relevant applications, including CO₂ capture. Here, novel functional polymeric materials with three‐dimensionally ordered macroporous (3DOM) structures are prepared by using colloidal crystals as templates using relatively simple, rapid, and inexpensive approaches. These ordered structures are used for the reversible CO₂ capture from ambient air by humidity swing. Typically, the colloidal crystal template is synthesized from polymer latex particles of poly(methyl methacrylate) (PMMA) or polystyrene (PS). To maintain the functionality of the material, it is important to prevent the porous structure collapsing, which can occur by the hydrolysis of the ester bonds in conventional crosslinkers under basic conditions. This hydrolysis can be prevented by using a water‐soluble crosslinker containing two quaternary ammonium moieties, which can be used to prepare stable porous crosslinked polymers with the monomer (vinylbenzyl)trimethylammonium chloride (VBTMACl) and using a PMMA‐based colloidal crystal template. The hydroxide‐containing monomer and dicationic crosslinker are synthesized from their chloride precursors, avoiding the ion‐exchange step which causes shrinkage of the pores. An analysis of different methods for infiltrating the monomer solution into the colloidal crystal template shows that infiltration using capillary forces leads to fewer defects than infiltration under a partial vacuum. In addition, functional macroporous films with micrometer thickness are prepared from a template of PS‐based colloidal crystals in a thin film. In general, the colloidal crystal templated materials showed improved CO₂ absorption/desorption rates and swing sizes compared to a commercially available material with similar functional groups. This work could easily be extended to create a new generation of ordered macroporous polymeric materials with tunable functionalities for other applications.     

Recent Advances in Birefringence Studies at THz Frequencies

In the last few years, various studies on terahertz (THz) birefringence have been presented, based on polarization-sensitive THz time-domain spectroscopy. The field of THz birefringence is a wide one covering several aspects, such as different materials exhibiting THz birefringence, polarization-sensitive THz technology, as well as numerous methods for extracting the birefringence properties of a sample from the THz data. Therefore, this paper aims at reviewing recent results on THz birefringence measurements presented in literature, addressing the above aspects and giving an overview of the topic. Moreover, it will focus on the investigation of birefringent fibrous samples, where specific results will be discussed in detail. Altogether, this paper should give a comprehensive view on the recent achievements in the measurements of THz birefringence.     

Spline-based cardiac motion tracking using velocity-encoded magnetic resonance imaging

This paper deals with the problem of tracking cardiac motion and deformation using velocity-encoded magnetic resonance imaging. We expand upon an earlier described method and fit a spatiotemporal motion model to measured velocity data. We investigate several different spatial elements both qualitatively and quantitatively using phantom measurements and data from human subjects. In addition, we also use optical flow estimation by the Horn–Schunk method as complementary data in regions where the velocity measurements are noisy. Our results show that it is possible to obtain good motion tracking accuracy in phantoms with relatively few spatial elements, if the type of element is properly chosen. The use of optical flow can correct some measurement artifacts but may give an underestimation of the magnitude of the deformation. In human subjects the different spatial elements perform quantitatively in a similar way but qualitative differences exists, as shown by a semiquantitative visual scoring of the different methods.      

Characterization of Micro-Powders for the Fabrication of Compression Molded THz Lenses

We investigate different micro-powders that can be used as base materials for THz lenses fabricated by compression molding. For this application materials with a very weak THz absorbance and low dispersion are required. By measuring the THz absorption coefficient and refractive index of pellets pressed from the different micro-powders, we identify several materials that are well suited for the fabrication of compression molded THz lenses (CMLs). In addition, a considerable range of the refractive index is covered by the samples, which will allow for the fabrication of CMLs with different focal lengths for one and the same lens design.     

ATM—success or failure? Economic remarks on the introduction of broadband technology in Europe

The introduction of ATM and broadband-based equipment into the European market requires considerable capital investment. It will result in a structural technological change, affecting the competitiveness of the European economy. Successful introduction depends on how both ATM network equipment and broadband based end-user equipment are brought onto the market. This paper focuses on economic benefits and anticipating marketing strategies, applicable in Europe with its specific, historically evolved structures. The price to pay for this ‘in-sight information’ is leaving out a global comparison. Refraining from evaluation whether conditions are good or bad for Europe or other areas, the article explains what conditions can be found there recently and where are the chances and challenges right now.