Complete oxidation of methane at low temperature over Pt and Pd catalysts for the abatement of lean-burn natural gas fuelled vehicles emissions: influence of water and sulphur containing compounds

The catalytic activity of fresh Pd and Pt catalysts supported on γ-alumina in the complete oxidation of CH₄ traces under lean-burn conditions was studied in the presence or the absence of water or H₂S. Steam-aged catalysts were also studied in order to simulate long-term ageing in real lean-burn natural gas fuelled vehicles (NGVs) exhaust conditions. Without water or H₂S added to the feed, Pd catalysts exhibit a superior catalytic activity in methane oxidation compared to Pt ones, whatever the catalysts were fresh or aged. The addition of 10 vol.% water vapour to the feed strongly affects the activity of the fresh Pd catalyst, thus being only slightly more efficient than the fresh Pt one. H₂S has a strong poisoning effect on the catalytic activity of Pd catalysts, while Pt catalysts are more resistant. The fresh H₂S-poisoned Pd/Al₂O₃ catalyst was studied by TPD in O₂/He. Poisoning species decompose above 873 K as SO₂ and O₂ in relative concentrations consistent with the decomposition of surface sulphate species. However, a treatment in O₂/He at temperatures as high as 923 K does not allow the complete regeneration of the catalytic activity of H₂S-poisoned Pd/Al₂O₃. A mechanism involving the poisoning of PdO by sulphate species is proposed. Different diffusion processes by which these sulphate species can migrate back and forth between PdO and the support, depending on the experimental conditions, are suggested.     

Risk in Transport Investments

We discuss how the standard Cost-Benefit Analysis should be modified in order to take risk (and uncertainty) into account. We propose different approaches used in finance (Value at Risk, Conditional Value at Risk, Downside Risk Measures, and Efficiency Ratio) as useful tools to model the impact of risk in project evaluation. After introducing the concepts, we show how they could be used in CBA and provide some simple examples to illustrate how such concepts can be applied to evaluate the desirability of a new project infrastructure.     

Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.     

Complete Oxidation of Methane at Low Temperature over Pt Catalysts Supported on High Surface Area SnO2

The catalytic activity of Pt catalysts supported on high surface area tin(IV) oxide in the complete oxidation of CH₄ traces under lean conditions at low temperature was studied in the absence and in the presence of water (10 vol.%) or H₂S (100 vol.ppm). Their catalytic properties were compared to those of Pd/Al₂O₃ and Pt/Al₂O₃. In the absence of H₂S in the feed, Pt/SnO₂appears as a very promising catalyst for CH₄ oxidation, being even significantly more active under wet conditions than the best reference catalyst, Pd/Al₂O₃. Catalysts steamed-aged at 873 K were also studied in order to simulate long term ageing in real lean-burn NGV exhaust conditions. To this respect, Pt/SnO₂ is slightly less resistant than Pd/Al₂O₃. In the presence of H₂S, Pt/SnO₂catalysts are rapidly and almost completely poisoned, comparably to Pd/Al₂O₃and the catalytic activity is hardly restored upon oxidising treatment below 773 K. A synergetic effect between Pt and specific surface SnO₂sites active in CH₄oxidation is proposed to explain the superior catalytic behaviour of Pt/SnO₂.     

Mechanism of formation of urchin-like ZnO

Thin films composed of ZnO nanowires (NWs) hierarchically organized with an urchin-like 3D morphology were obtained by combining the electrochemical deposition and sphere lithography methods. Deposited on a transparent conductive oxide substrate (TCO), a monolayer of carboxylate modified polystyrene spheres organized with a hexagonal closed-packed structure played the role of a template. The spheres were activated in a solution of zinc chloride by the formation of bonds between the carboxylate terminals and the Zn²⁺ ions and were used as a template for the electrodeposition of vertically aligned ZnO NWs around them. Without this treatment, ZnO NWs were deposited only on the TCO substrate between the PS spheres. To reach a density of nanowires high enough to obtain the urchin morphology, the concentration of ZnCl₂ had to be at least equal to 2 M. It was also found, as soon as small grains of ZnO started to be electrodeposited on the polystyrene spheres that the spheres were no longer close packed. The space created between them increased with the increase in the number of small ZnO grains and the increase in their length, allowing the further growth of the nanowires between the spheres. As a result the initial round shape of the spheres was modified and the urchin-like ZnO exhibited an ellipsoidal shape.     

An FTIR/ATR in situ study of sorption and transport in corrosion protective organic coatings: Paper 2. The effects of temperature and isotopic dilution

A detailed temperature variation (18–50 °C) FTIR/ATR study of sorption and desorption of water into a series of cured epoxy resins has been reported. For higher temperatures (35–50 °C) the data were modelled with a single Fickian diffusion equation, giving an increased D as the temperature increased and an activation energy (E_A) in the 55–60 kJ mol⁻¹ region. At lower temperatures (18–35 °C)—well-below the T_g—a two-stage sorption equation was needed and the apparent E_A was negative. This is probably associated with changes in water clustering among the distributed ‘voids’ in the glassy polymer associated with chain relaxation at extended times. The use of D₂O as a penetrant allowed diffusion coefficient measurements for highly dense epoxy matrices, where FTIR/ATR cannot detect the ν(OH) band of water over and above the residual polymer–OH groups (in the dry state). The data for the D₂O studies were notably influenced by isotopic exchange; which was found to be a diffusion controlled process, even in a polymer matrix.     

Adipose-Derived Stem Cells in the Treatment of Perianal Fistulas in Crohn’s Disease: Rationale,Clinical Results and Perspectives

Between 20 to 25% of Crohn’s disease (CD) patients suffer from perianal fistulas, a marker of disease severity. Seton drainage combined with anti-TNFα can result in closure of the fistula in 70 to 75% of patients. For the remaining 25% of patients there is room for in situ injection of autologous or allogenic mesenchymal stem cells such as adipose-derived stem/stromal cells (ADSCs). ADSCs exert their effects on tissues and effector cells through paracrine phenomena, including the secretome and extracellular vesicles. They display anti-inflammatory, anti-apoptotic, pro-angiogenic, proliferative, and immunomodulatory properties, and a homing within the damaged tissue. They also have immuno-evasive properties allowing a clinical allogeneic approach. Numerous clinical trials have been conducted that demonstrate a complete cure rate of anoperineal fistulas in CD ranging from 46 to 90% of cases after in situ injection of autologous or allogenic ADSCs. A pivotal phase III-controlled trial using allogenic ADSCs (Alofisel^®) demonstrated that prolonged clinical and radiological remission can be obtained in nearly 60% of cases with a good safety profile. Future studies should be conducted for a better knowledge of the local effect of ADSCs as well as for a standardization in terms of the number of injections and associated procedures.     

Screening of genetically modified organisms and specific detection of Bt176 maize in flours and starches by PCR-enzyme linked immunosorbent assay

Polymerase chain reaction (PCR)-enzyme linked immunosorbent assays (ELISAs) targeting either the 35S promoter or the Bt176 specific junction sequence were developed to screen for the presence of genetically modified organisms (GMOs) and specifically detect Bt176 maize in flours and starches. Two additional PCR-ELISA assays were developed to validate the results: one, based on the detection of the maize alcohol dehydrogenase 1 promoter specifically detected the presence of maize, and the other, based on the detection of a conserved sequence of plants ( 26S ribosomal RNA gene), validated the extracted DNA amplification. The PCR-ELISA assays developed here were highly specific and found to be as sensitive as the reference Southern hybridisation assay. The PCR-ELISA tests were at least 6 times more sensitive than gel electrophoresis and allowed 0.1% GMOs to be detected in Bt176, Bt11, Mon810 maize and Roundup Ready soybean. The PCR-ELISA tests are a method of choice for GMO screening and identifying Bt176 maize in flours and native starches. They may offer a cheaper alternative to the expensive real-time PCR assays and may be useful in laboratory GMO monitoring.