Electropolymerization of chlorinated phenols on a Pt electrode in alkaline solution. Part II: An electrochemical quartz crystal microbalance study

Electropolymerization of phenol and mono-, di-, tri-, pentachlorophenols was studied using EQCM on a Pt electrode at 0.78 V (SHE) in 1 M NaOH solution containing 0.1 M of the corresponding phenol. The highest electropolymerization rate was found for ortho-substituted chlorophenols indicating a weak fouling of the electrode. Low electropolymerization rates for para-substituted chlorophenols suggest a low permeability of the polymer film, resulting in rapid electrode fouling. The EQCM data suggest that electropolymerization of chlorophenols occurs without Cl-elimination for the monomers with unsubstituted ortho and para positions. Dechlorination is most pronounced for electropolymerization of para-substituted isomers. The mechanism of electropolymerization of chlorophenols is discussed.     

Statistical Properties of Transition Amplitudes in Generic Systems

I review some recent results on the statistical properties of matrix elements of typical observables (transition amplitudes) in an eigenbasis of generic quantum Hamiltonian systems. The classical limit of an underlying system can be either integrable, or fully chaotic, or mixed with regular and irregular regions coexisting in phase space. In any case, the variance of transition amplitudes (the local average transition probability) as a function of energy and transition frequency can be calculated in terms of classical power spectra. The probability distribution of transition amplitudes in high energy (semiclassical) regime is derived by means of random matrix theory, whereas in low and intermediate energy (nonsemiclassical) regime the probability distribution of transition amplitudes exhibits universal exponential tails which still call for theoretical explanation.     

Light Spectral Composition Modifies Polyamine Metabolism in Young Wheat Plants

Although light-emitting diode (LED) technology has extended the research on targeted photomorphogenic, physiological, and biochemical responses in plants, there is not enough direct information about how light affects polyamine metabolism. In this study, the effect of three spectral compositions (referred to by their most typical characteristic: blue, red, and the combination of blue and red [pink] lights) on polyamine metabolism was compared to those obtained under white light conditions at the same light intensity. Although light quality induced pronounced differences in plant morphology, pigment contents, and the expression of polyamine metabolism-related genes, endogenous polyamine levels did not differ substantially. When exogenous polyamines were applied, their roborative effect were detected under all light conditions, but these beneficial changes were correlated with an increase in polyamine content and polyamine metabolism-related gene expression only under blue light. The effect of the polyamines on leaf gene expression under red light was the opposite, with a decreasing tendency. Results suggest that light quality may optimize plant growth through the adjustment of polyamine metabolism at the gene expression level. Polyamine treatments induced different strategies in fine-tuning of polyamine metabolism, which were induced for optimal plant growth and development under different spectral compositions.     

Ultrasonic air-coupled testing of square-shape CFRP composite rods by means of guided waves

In aerospace industry, one of the most important parts of gliders and motor-gliders is a lightweight longeron reinforcement made of carbon fibre reinforced plastics (CFRP) rods, known as Graphlite SM315 composite. During manufacturing, the rods as constructional elements are glued together in epoxy-filled matrix in order to build the arbitrary spar profile. The defects present in single rods such as breakage of fibres, multiple delaminations due to the lack of bonding between fibres and reduction in density affect essentially the strength and the fail-safety of the overall construction.The aim of the present work is to investigate the effects (transmission, reflection, scattering and mode conversion) of guided waves propagation along a square-shape CFRP rod in the case of contactless excitation/reception and interaction with region of multiple delaminations applying the numerical model and performing experiments.The square-shape CFRP composite rods possessing internal artificial delamination type defects have been investigated by numerical modelling and experiments employing the developed air-coupled technique (pitch-catch set-up) for cases of conventional transmission and advanced back-scattering configurations. Numerical predictions of guided wave interaction with a multiple delamination type defect in a CFRP composite rod have been made and the interaction mechanism explained. It is possible to conclude, that the actual sizes of the internal defects have been clearly detected using reception of the back-scattered waves over the edges of the defective regions only.     

Closed-loop control of hydraulic telescopic handler

Automatization is supposed to improve working conditions and safety in the construction industry, as it already did in manufacturing industries. This paper presents the development of a robotic control system for a commercially available hydraulic telescopic handler. The target application for the telescopic handler is semi-automated assembly of facade panels. The base handler was upgraded with two additional hydraulic axes, position sensors and closed-loop control system, while the original handler safety assurance mechanisms were preserved. The control approach is based on a PI controller with velocity feedforward and valve overlap compensation. The direct and inverse kinematic models of handler mechanism were developed to enable control of end-effector motion along a straight line in the Cartesian coordinate system. The motion performances were evaluated following the ISO 9283 standard with payload of 2000 kg. Results show the repeatability of positioning bellow 7.0 mm and the straight line tracking error smaller than 63 mm.     

Reduced decoder complexity and latency in pixel-domain Wyner–Ziv video coders

In some video coding applications, it is desirable to reduce the complexity of the video encoder at the expense of a more complex decoder. Wyner–Ziv (WZ) video coding is a new paradigm that aims to achieve this. To allocate a proper number of bits to each frame, most WZ video coding algorithms use a feedback channel, which allows the decoder to request additional bits when needed. However, due to these multiple bit requests, the complexity and the latency of WZ video decoders increase massively. To overcome these problems, in this paper we propose a rate allocation (RA) algorithm for pixel-domain WZ video coders. This algorithm estimates at the encoder the number of bits needed for the decoding of every frame while still keeping the encoder complexity low. Experimental results show that, by using our RA algorithm, the number of bit requests over the feedback channel—and hence, the decoder complexity and the latency—are significantly reduced. Meanwhile, a very near-to-optimal rate-distortion performance is maintained. This work has been partially supported by the Spanish Ministry of Education and Science and the European Commission (FEDER) under grant TEC2005-07751-C02-01. A. Pižurica is a postdoctoral research fellow of FWO, Flanders.     

Traffic classification and scheduling in ATM networks

Virtual paths (VPs) are an integral part of the resource management and control hierarchy of ATM (asynchronous transfer mode) networks. To improve the utilization of network resources and facilitate management and control, source types are organized into traffic classes. Each traffic class is transported by its own virtual path subnetwork. In this paper, we consider issues related to the design of traffic classes. We consider an ATM switch node to which cells arrive from a diverse set of source types. Traffic classes are assumed to be served according to a weighted round robin policy, while cells belonging to a given traffic class are served in first-come-first-served order. We consider the problem of determining the optimal set of traffic classes. Under suitable simplifying assumptions, it is shown that the above problem can be modeled as a set-partitioning problem. The structure of the problem at hand is then exploited to develop an efficient heuristic. Several examples are given to illustrate the developed methodology.Supported partially through NSF Grant NCR-891447 and AT&T Grant 5-23690.     

Channel access and interference issues in multi-code DS-CDMA wireless packet (ATM) networks

Multi-Code Direct-Sequence Code-Division-Multiple-Access (MC-CDMA) has been proposed as a flexible multiple access scheme for wireless packet networks that support a large variety of mobiles with different and even time-varying rates. Using MC-CDMA, traffic streams with significantly different transmission rates can be easily integrated into a unified architecture, with all the transmissions occupying the same bandwidth and having the same spread spectrum processing gain. In this paper, we address medium-access and interference issues in MC-CDMA wireless packet networks. For medium access, we propose and study Multi-Code CDMA (MC-CDMA) with Distributed-Queueing Request Update Multiple Access (DQRUMA) to form a unified bandwidth-on-demand fair-sharing platform for multi-rate wireless services. DQRUMA is an efficient demand-assignment multiple access protocol for wireless access and scheduling. Pseudo-Noise (PN) codes (primary codes) and optimal power levels are allocated to the mobiles on a slot-by-slot basis, and a Maximum Capacity Power Allocation (MCPA) criterion exploits the sub-code concatenation property of the MC-CDMA transmission. Simulation results show that the system provides close to ideal-access performance for multi-rate mobiles, both with homogeneous traffic characteristics and with a mix of heterogeneous traffic characteristics. Finally, we analyze the effects of MC-CDMA intercell interference on the reverse link (i.e., mobile to cell site) and investigate interference reduction by using the Maximum Capacity Power Allocation (MCPA) criterion. Our results show significant reduction in reverse-link MC-CDMA intercell interference is possible using the MCPA criterion.     

A graded-gap detector of ionizing radiation

The current response of Al_xGa_1−x As graded-gap layers to optical and X-ray radiation was studied. A graded-gap electric field in the 15-μm-thick Al_xGa_1−x As layers, with x varying from 0 to 0.4, ensures the complete collection of charges generated by ionizing radiation and makes it possible to attain the value of 0.25 A/W for the current-power sensitivity of Al_xGa_1−x As. In the layers with a lowered doping level of the narrow-gap region of the graded-gap Al_xGa_1−x As layer, the voltage-power sensitivity to X-ray radiation with energy lower than 15 keV is as high as 1.6×10³ V/W in the photovoltaic mode. __________ Translated from Fizika i Tekhnika Poluprovodnikov, Vol. 36, No. 1, 2002, pp. 124–128. Original Russian Text Copyright ? 2002 by J. Požela, K. Požela, Šilėnas, Jasutis, Dapkus, Kinduris, Jucienė.     

A Bluetooth Based Sensor Network for Civil Infrastructure Health Monitoring

Communicating with sensors has long been limited either to wired connections or to proprietary wireless communication protocols. Using a ubiquitous and inexpensive wireless communication technology to create Sensor Area Networks (SANs) will accelerate the extensive deployment of sensor technology. Bluetooth, an emerging, worldwide standard for inexpensive, local wireless communication is a viable choice for SANs because of its inherent support for some of the important requirements – low power, small form factor, low cost and sufficient communication range. In this paper we outline an approach, centered on the Bluetooth technology, to support a sensor network composed of fixed wireless sensors for health monitoring of highways, bridges and other civil infrastructures. We present a topology formation scheme that not only takes into account the traffic generated by different sensors but also the associated link strengths, buffer capacities and energy availability. The algorithm makes no particular assumptions as to the placement of nodes, and not all nodes need to be in radio proximity of each other. The output is a tree shaped scatternet rooted at the sensor hub (data logger) that is balanced in terms of traffic carried on each of the links. We also analyze the scheduling, routing and healing aspects of the resulting sensor-net topology.