A review of median filter systems for analog signal processing

This paper presents a review of existing analog implementations of the median and other ranked-order filter operations. The basic properties of median signal processing are first reviewed. Different analog median filter architectural approaches and implementations, introduced by several authors, are then discussed. These include filters based on analog delay lines and either nonlinear selection networks or ramp voltage generators. The Linear-Median Hybrid filter concept is presented and two examples of analog circuit implementations are given. Finally, a neural network approach is discussed.     

Photoswitchable Superabsorbency Based on Nanocellulose Aerogels

Chemical vapor deposition of a thin titanium dioxide (TiO₂) film on lightweight native nanocellulose aerogels offers a novel type of functional material that shows photoswitching between water‐superabsorbent and water‐repellent states. Cellulose nanofibrils (diameters in the range of 5–20 nm) with native crystalline internal structures are topical due to their attractive mechanical properties, and they have become relevant for applications due to the recent progress in the methods of their preparation. Highly porous, nanocellulose aerogels are here first formed by freeze‐drying from the corresponding aqueous gels. Well‐defined, nearly conformal TiO₂ coatings with thicknesses of about 7 nm are prepared by chemical vapor deposition on the aerogel skeleton. Weighing shows that such TiO₂‐coated aerogel specimens essentially do not absorb water upon immersion, which is also evidenced by a high contact angle for water of 140° on the surface. Upon UV illumination, they absorb water 16 times their own weight and show a vanishing contact angle on the surface, allowing them to be denoted as superabsorbents. Recovery of the original absorption and wetting properties occurs upon storage in the dark. That the cellulose nanofibrils spontaneously aggregate into porous sheets of different length scales during freeze‐drying is relevant: in the water‐repellent state they may stabilize air pockets, as evidenced by a high contact angle, in the superabsorbent state they facilitate rapid water‐spreading into the aerogel cavities by capillary effects. The TiO₂‐coated nanocellulose aerogels also show photo‐oxidative decomposition, i.e., photocatalytic activity, which, in combination with the porous structure, is interesting for applications such as water purification. It is expected that the present dynamic, externally controlled, organic/inorganic aerogels will open technically relevant approaches for various applications.     

On the relative significance of bacteria for the distribution of polychlorinated biphenyls in Arctic Ocean surface waters

This study presents the first field observations of polychlorinated biphenyls (PCB) in bacteria in oceanic waters. To contribute to the limited knowledge of what role bacteria play in the dynamics of hydrophobic organic contaminants (HOCs) in surface seawater, PCB concentrations were measured in bacteria (0.2-2 microm) collected at seven stations in the northern Barents Sea marginal ice zone (MIZ) and the central Arctic Ocean. Concentrations of individual PCB congeners in bacteria were 0.5-5 ng/g oc (organic carbon), which was as high as or higher than PCB concentrations in bulk particulate organic carbon (POC, "phytoplankton"; > 0.7 microm). Considering the relative biomasses of phytoplankton and bacteria, the amount of PCB in bacteria was generally 5-20% of that in phytoplankton, but at two stations the bacterial biomass contained more PCBs than the phytoplankton pool. This study further showed that efficient PCB uptake in bacteria may be described by an apparent equilibrium partitioning model with linear regressions between the organic-carbon-normalized partition coefficient and the octanol-water partition coefficient (log K(bact-oc)-log K(ow)).     

A rheo-optical apparatus for real time kinetic studies on shear-induced alignment of self-assembled soft matter with small sample volumes

In soft materials, self-assembled nanoscale structures can allow new functionalities but a general problem is to align such local structures aiming at monodomain overall order. In order to achieve shear alignment in a controlled manner, a novel type of rheo-optical apparatus has here been developed that allows small sample volumes and in situ monitoring of the alignment process during the shear. Both the amplitude and orientation angles of low level linear birefringence and dichroism are measured while the sample is subjected to large amplitude oscillatory shear flow. The apparatus is based on a commercial rheometer where we have constructed a flow cell that consists of two quartz teeth. The lower tooth can be set in oscillatory motion whereas the upper one is connected to the force transducers of the rheometer. A custom made cylindrical oven allows the operation of the flow cell at elevated temperatures up to 200 degrees C. Only a small sample volume is needed (from 9 to 25 mm(3)), which makes the apparatus suitable especially for studying new materials which are usually obtainable only in small quantities. Using this apparatus the flow alignment kinetics of a lamellar polystyrene-b-polyisoprene diblock copolymer is studied during shear under two different conditions which lead to parallel and perpendicular alignment of the lamellae. The open device geometry allows even combined optical/x-ray in situ characterization of the alignment process by combining small-angle x-ray scattering using concepts shown by Polushkin et al. [Macromolecules 36, 1421 (2003)].     

Blue, green and red emissive silver nanoclusters formed in organic solvents

Strongly luminescent silver nanoclusters with tunable emission are directly synthesized in organic polar and apolar solvents. We show that an amphiphilic polystyrene-block-poly(methacrylic acid) block copolymer can be universally used as their support medium. A remarkable similarity in spectroscopic properties is observed between these clusters and charge-transfer organic dyes.     

Elution factors of synthetic oxotriacylglycerols as an aid in identification of peroxidized natural triacylglycerols by reverse-phase high-performance liquid chromatography with electrospray mass spectrometry

Selected elution factors were determined for model oxotriacylglycerols as an aid in identification of the peroxidation products of natural triacylglycerols by reverse-phase high-performance liquid chromatography (HPLC) with electrospray mass spectrometry (LC/ES/MS). For this purpose synthetic triacylglycerols of known structure were converted to hydroperoxides, hydroxides, epoxides, and core aldehydes and their dinitrophenylhydrazones by published procedures. The oxotriacylglycerols were resolved by normal-phase thin-layer chromatography and reverse-phase HPLC, and the identities of the oxotriacylglycerols confirmed by LC/ES/MS. Elution factors of oxotriacylglycerols were determined in relation to a homologous series of saturated triacylglycerols, ranging from 24 to 54 acylcarbons, and analyzed by reverse-phase HPLC, using a gradient of 20–80% isopropanol in methanol as eluting solvent and an evaporative light-scattering detector. It was shown that the elution times varied with the nature of the functional group and its regiolocation in the triacylglycerol molecule. A total of 31 incremental elution factors were calculated from chromatography of 33 oxygenated and nonoxygenated triacylglycerol species, ranging in carbon number from 36 to 54 and in double-bond number from 0 to 6.     

Reconfiguring flexible machine modules of a PCB assembly line

Assembly of electronic components to Printed Circuit Boards (PCB) is a complicated manufacturing process and therefore its control is usually divided into several subtasks which are handled separately. We consider the combined task of determining a machine configuration and line balancing for a single assembly line of interconnected, reconfigurable machine modules and one PCB type in production. The modules can be tailored to the needs of each PCB type by suitable assignments for placement heads, nozzles and feeders. Out of these, the component-to-machine assignment appears to be most difficult and we propose five different solution methods for it; brute force, random, greedy, local search and genetic algorithm. The genetic algorithm outperformed the other methods in practical test.     

化学分离法分析大型纸浆发电厂废渣中生物质底灰和飞灰成分(英文)

采用三步分离法,其中第一步用水,第二步用乙酸铵,第三步用盐酸,提取纸浆发电厂生物质飞灰和底灰的组分,以评估这些残渣的浸出行为。除了Mo、S、Na以及那些浓度低于检测范围的元素外,在这两种灰份中,对于其他元素这三种浸出剂的浸出能力从弱到强的顺序为:水、乙酸铵和盐酸。采用三步分离法处理的废渣中元素浓度比前期用BCR连续提取法得到的低。     

Comparison of the characteristics of bottom ash and fly ash from a medium-size (32 MW) municipal district heating plant incinerating forest residues and peat in a fluidized-bed boiler

In this study, the physical and chemical properties of bottom ash and fly ash originating from the co-combustion of biomass-derived fuels (i.e. wood chips, sawdust, bark, and peat) from a 32 MW fluidized bed boiler at a municipal district heating plant were investigated. Silicate minerals were predominant in the bottom ash and calcium minerals in the fly ash, with most of the inorganic nutrients and heavy metals being enriched in the fly ash. The enrichment factors for heavy metals in the fly ash varied between 0.2 for silicon and 16.3 for lead, and for plant nutrients, between 1.5 for phosphorous and 108 for potassium. However, all heavy metal concentrations in both the bottom ash and fly ash were significantly lower than the current Finnish limit for maximum allowable heavy metal concentrations for forest fertilizers, which came into force in March 2007. According to the particle size distribution, the mass loadings of heavy metals in the fly ash were more than 90% contributed by the smallest particle size fraction lower than 0.074 mm. In the bottom ash, between 83.6 and 91.9% of the mass loadings of heavy metals were contributed by the particle size fraction between 0.5 and 2.0 mm.