Color Subspaces as Photometric Invariants

Complex reflectance phenomena such as specular reflections confound many vision problems since they produce image ‘features’ that do not correspond directly to intrinsic surface properties such as shape and spectral reflectance. A common approach to mitigate these effects is to explore functions of an image that are invariant to these photometric events. In this paper we describe a class of such invariants that result from exploiting color information in images of dichromatic surfaces. These invariants are derived from illuminant-dependent ‘subspaces’ of RGB color space, and they enable the application of Lambertian-based vision techniques to a broad class of specular, non-Lambertian scenes. Using implementations of recent algorithms taken from the literature, we demonstrate the practical utility of these invariants for a wide variety of applications, including stereo, shape from shading, photometric stereo, material-based segmentation, and motion estimation.     

On the Length and Area Regularization for Multiphase Level Set Segmentation

In this paper we introduce novel regularization techniques for level set segmentation that target specifically the problem of multiphase segmentation. When the multiphase model is used to obtain a partitioning of the image in more than two regions, a new set of issues arise with respect to the single phase case in terms of regularization strategies. For example, if smoothing or shrinking each contour individually could be a good model in the single phase case, this is not necessarily true in the multiphase scenario.     

Designing fault-tolerant real-time computer systems with diversified bus architecture for nuclear power plants

Fault-tolerant real-time computer (FT-RTC) systems are widely used to perform safe operation of nuclear power plants (NPP) and safe shutdown in the event of any untoward situation. Design requirements for such systems need high reliability, availability, computational ability for measurement via sensors, control action via actuators, data communication and human interface via keyboard or display. All these attributes of FT-RTC systems are required to be implemented using best known methods such as redundant system design using diversified bus architecture to avoid common cause failure, fail-safe design to avoid unsafe failure and diagnostic features to validate system operation. In this context, the system designer must select efficient as well as highly reliable diversified bus architecture in order to realize fault-tolerant system design. This paper presents a comparative study between CompactPCI bus and Versa Module Eurocard (VME) bus architecture for designing FT-RTC systems with switch over logic system (SOLS) for NPP.     

A Call-Admission Control (CAC) Algorithm for Providing Guaranteed QoS in Cellular Networks

Future broadband wireless access systems are expected to integrate various classes of mobile terminals (MTs), each class with a different type of quality of service (QoS) requirement. When the load on a wireless network is high, the guarantee of QoS for each class of MTs is a challenging task. This study considers two classes of MTs—profiled MTs and nonprofiled or regular MTs. It is assumed that profiled users require a guaranteed QoS. The measure of QoS is the probability of forced termination of a call that was allowed to access the network. Two previous handoff prioritization schemes—(i) prerequest scheme and (ii) guard channel scheme—decrease handoff failure (and hence forced termination). In this work, we compare and contrast both the schemes through extensive simulation and we find that neither guard channel nor channel prerequest scheme can guarantee a desired level of QoS for the profiled MTs. We then propose a novel call-admission control (CAC) algorithm that can maintain any desired level of QoS, while the successful call completion rate is very high. In the proposed algorithm, the new call arrival rate is estimated continuously, and when the estimated arrival rate is higher than a predetermined level, some new calls are blocked irrespective of the availability of channels. The objective of this new call preblocking is to maintain a cell's observed new call arrival rate at no more than the predetermined rate. We show that the proposed method can guarantee any desired level of QoS for profiled users.     

Performance evaluation and implementation of convolution coded OFDM modem in wireless underwater acoustic communication

High‐data transmission rate and reliable communication in underwater acoustic channel is challenging because of limited bandwidth, multipath propagation, and Doppler shift, which results in poor bit error performance. Under this constraint, this paper explains the simulation results of underwater wireless acoustic data transmission system by using quadrature phase shift keying modulation with convolution encoder at the transmitter and proposed Viterbi decoder at the receiver. The decoder algorithm in comparison with MATLAB inbuilt function shows asserting improved results. This paper evaluates the performance of convolution coded orthogonal frequency division multiplexing modem, which is studied over typical underwater channel through an extensive computer simulation and a semirealistic experimentation. The performance of convolution coded orthogonal frequency division multiplexing system is measured in time domain plots, bit error rate curves, and number of bit errors per frame over additive white Gaussian noise and Rayleigh channel conditions.     

Optimization of on-chip ESD protection structures for minimal parasitic capacitance

Diodes are key components in on-chip electrostatic discharge (ESD) protection design. As the operating frequency of the microchip being protected against the ESD continues to increase, the parasitic capacitance associated with the diodes in the ESD structure starts to impose problems for RF operation. This paper presents a systematic approach to optimize the diode structure for minimal parasitic capacitance based on the requirements of breakdown voltage and heat dissipation. Device simulator Atlas with mix-mode simulation capability is calibrated against measurement data and used to carry out the optimization. An optimized diode structure with a parasitic capacitance of less than 30 fF at an operating frequency of 10 GHz and ESD charging voltage of 1 kV has been suggested. Furthermore, a case study to implement and optimize the ESD protection structure based on an existing 0.13-μm CMOS technology has been presented and verified.     

Grafting of a liquid crystal polymer on carbon fibers

Covalent grafting of mesogenic chains on carbon fiber surfaces was attempted as part of a study on composite materials containing liquid crystal polymer matrices. Grafting in these composite systems is viewed not only as a mechanism to achieve interfacial bonding but also as an approach to modify the interphase physical structure. The synthetic approach to grafting involved the in-situ polymerization of monomers in the presence of functionalized fibers in order to grow chains covalently attached to the fibers. The chemical mechanism may be viewed as the “transesterification of car boxy lated fibers” with acetylated monomers. The monomers used were pimelic acid, p-acetoxybenzoic acid and diacetoxy hydroquinone which are known to yield upon condensation a chemically aperiodic nematic polymer. Evidence for grafting was obtained from X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) analysis on fibers retrieved from composite samples. Interestingly, SEM micrographs of fractured composite specimens containing the mesogen-grafted fibers reveal excellent wetting and interfacial bonding of a liquid crystalline matrix on the carbon surfaces. Based on theoretical considerations for end-adsorbed macromolecules and the nematogenic nature of the grafted chains we infer that dense layers of adsorbed polymer may form at the interfaces studied. From a materials point of view the in situ growth of liquid crystal polymer chains on fibers may offer mechanisms to control composite properties through both bonding and molecular orientation in interfacial regions.     

Characterization and Modeling of Laser Micromachined Periodically Corrugated Metallic Terahertz Wire Waveguides

Finite element method simulations of periodically corrugated metal terahertz wire waveguides have been conducted with concurrent analysis done on both the near-field confinement properties and the far-field emission properties at the end of the waveguides. This modeling was used to guide the choice of design parameters for the fabrication of waveguides with laser micromachining. The waveguides were characterized with a fiber-coupled terahertz time-domain spectroscopy and imaging system. The propagation properties as well as the frequency dependent diffraction at the end of the wire waveguides were examined and compared to straight, non-engineered metallic wire waveguides.     

Using directionality in mobile routing

The increased usage of directional methods of communications has prompted research into leveraging directionality in every layer of the network stack. In this paper, we explore the use of directionality in layer 3 to facilitate routing in highly mobile environments. We introduce Mobile Orthogonal Rendezvous Routing Protocol (MORRP) for mobile ad-hoc networks (MANETs). MORRP is a lightweight, but scalable routing protocol utilizing directional communications (such as directional antennas or free-space-optical transceivers) to relax information requirements such as coordinate space embedding, node localization, and mobility. This relaxation is done by introducing a novel concept called the directional routing table (DRT) which maps a set-of-IDs to each interface direction to provide probabilistic routing information based on interface direction. We show that MORRP achieves connectivity with high probability even in highly mobile environments while maintaining only probabilistic information about destinations. Additionally, we compare MORRP with various proactive, reactive, and position-based routing protocols using single omni-directional interfaces and multiple directional interfaces and show that MORRP gains over 10–14 × additional goodput vs. traditional protocols and 15–20% additional goodput vs. traditional protocols using multiple interfaces. MORRP scales well without imposing DHT-like graph structures (eg: trees, rings, torus etc). We also show that high connectivity can be achieved without the need to frequently disseminate node position resulting increased scalability even in highly mobile environments.