Dynamical modelling of an activated sludge system of a petrochemical plant operating at high temperatures.

The Mexican petrochemical industry, Morelos S.A. de C.V., is one of the biggest and more important petroleum industries in Mexico and Latin America. It has an activated sludge system to treat its wastewater flow, which is approximately 7,000 m3/d. The wastewater contains volatile organic carbon substances classified as toxics. The old surface aeration system was changed for fine bubble diffusers; however, one major drawback of the new aeration system is that the temperature in the bioreactor has increased due to the compression of the air, which at the compressor exit reaches 85 degrees C. This effect results in the temperature in the bioreactor attaining 32 degrees C during the fall, whereas in the spring and summer, the bioreactor temperature reaches higher values than 40 degrees C. The high temperatures reduce the microorganism activity and cause a higher volatilisation rate of volatile compounds, among other effects, which affect the performance of the biological treatment. This work was performed to obtain a better modelling of the wastewater treatment from the petrochemical industry. The model describes the effect of the temperature on the performance of the biological treatment. The model was obtained from tests that were carried out in laboratory reactors with 14 L capacity, which were operated at different temperatures (from 30 to 45 degrees C), with the same wastewater and conditions as the actual system.     

Approximate feedback linearization of discrete-time non-linear systems using virtual input direct design

The design of feedback-linearization and poles-placement controllers for discrete-time non-linear plants, using Input/Output/State measurements only, is typically addressed via indirect design. In this paper we propose the use of a new technique, based on a Virtual Input Direct Design (VID²) approach. The main feature of such a technique is to reduce the control design problem into a standard non-linear mapping approximation problem, without calling for the preliminary construction of an appropriate model of the plant. As compared with the existing methods, the new one requires less computational effort, while taking full advantage of the non-linear approximation software tools already available. In this paper, the new method is described, a simple theoretical analysis is given, and some numerical examples are presented.     

Computing the energy balance of a statue of bronze: The San Marco's horses as a case study

The energy balance is discussed for the complex case of bronze or marble statuary horses and particularly the four horses of San Marco in Venice. Having computed the coefficient of exchange between bronze and the atmosphere, the daytime overheating is evaluated for different seasons and orientations of the statues. The equations can be solved with reasonable approximation and both the past and future overheatings can be evaluated as a function of the growing surface weathering and blackening. Therefore, the present analysis points out the chief characteristics of both the diurnal cycle and the variation over the centuries of the response of the bronzes to atmospheric variables.     

Current decomposition in asymmetrical, unbalanced three-phasesystems under nonsinusoidal conditions

The most attractive theories found in the literature for the representation of the electrical systems under nonsinusoidal conditions can be divided to a great extent into those operating in the time domain and those operating in the frequency domain. When three-phase systems are concerned, the time-domain approach is mainly due to Akagi and Nabae under the name of “instantaneous power theory” or “p-q theory” and is based on the Park transformation. The frequency-domain approach is mainly due to Czarnecki. At a first reading, these two theories seem to be quite different. This paper shows how the application of some interesting properties of the Park transformation leads to a unified approach to the harmonic and sequence components and hence allows derivation of the frequency-domain current decomposition proposed by Czarnecki in a more straightforward way. Moreover, an extension of this decomposition to the case of asymmetrical supply voltages is considered     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

Plasma lipoprotein(a) is not a predictor for restenosis after elective high-pressure coronary stenting

BACKGROUND: Preceding mucosal response to one allergen leads to the priming of the nasal mucosal response to another allergen. This study aimed to determine whether environmental allergens, especially ubiquitous animal dander, can induce nasal priming. METHODS: We investigated 26 grass-pollen-allergic subjects with additional sensitization to other aeroallergens. We performed continuous allergen challenge for 2 h with 1500 Dactylis glomerata pollen/m3 in the Vienna challenge chamber. The nasal flow at 150 Pa was examined, and subjective scores were obtained every 15 min. Statistical analysis was calculated from the area under curve of nasal flow reduction by Student's t-test and the Mann-Whitney U-test. Alpha was 0.05. RESULTS: In subjects with positive cat-dander RAST (class of > or = 3), besides grass-pollen allergy, the specific nasal allergic reaction to Dactylis challenge was significantly pronounced (P < 0.01), and an earlier onset of reaction was evident. The same results were obtained with additional sensitization to dog dander (P < 0.05). Concomitant sensitization to mugwort also led to escalating symptoms (P < 0.05). CONCLUSIONS: These results indicate that a specific nasal allergic reaction is augmented by environmental priming caused by ubiquitous animal dander and possibly is influenced by the daily use of spices.     

Transmission line routing for reduced external field disturbance

When immersed in a disturbing electromagnetic field, electronic systems are subject to interference due to the energy injected by the external field into the system through the electronic units and, especially, through the transmission lines connecting units one another. The issue of reducing the unwanted energy injection through connecting transmission lines is addressed in this contribution from the point of view of the routing, i.e. of the disposition of the connecting lines that minimizes the injection. The problem is formulated as an optimization problem, dealt with by the simulated annealing minimization technique combined with an efficient way of computing the field coupling to the lines. Results are reported for various cases, and the relation between the characteristics of the interfering field and the efficiency of the reduction is discussed.     

Optimal configuration of Energy-Efficient Ethernet

The IEEE 802.3az standard provides a new low power mode that Ethernet network interfaces can use to save energy when there is no traffic to transmit. Simultaneously with the final standard approval, several algorithms were proposed to govern the physical interface state transition between the normal active mode and the new low power mode. In fact, the standard leaves this sleeping algorithm unspecified to spur competition among different vendors and achieve the greatest energy savings. In this paper, we try to bring some light to the most well known sleeping algorithms, providing mathematical models for the expected energy savings and the average packet delay inflicted on outgoing traffic. We will then use the models to derive optimum configuration parameters for them under given efficiency constraints.