Experimental studies on the weatherability of the capivara dam basalts,rio paranapanema,brazil

The weatherability of the basalts in the Capivara Dam site, Rio Paranapanema, São Paulo State, Brazil, has been studied by means of saturation-drying tests. A great number of samples have disaggre — gated intensively with production of fines. The behavior of these rocks is related to their petrography, especially to their content in expansive clay minerals. These studies were performed in order to obtain data for the utilization of this material as rock fill, including ripraps.     

Lead contamination in tap water of households with children in Lower Saxony, Germany

Lead has numerous acute and chronic adverse effects on human beings. This is especially true for infants and children. The main path of lead ingestion in children can be different according to housing and living situation. The intake of lead through drinking water is commonly due to metal corrosion. The users plumbing can be an important factor. In recent years, many lead pipes in Germany have been replaced by pipes made of an alternative material. The aim of this study is to assess the present state of drinking water contamination and the resulting exposure of infants to lead. For this purpose mothers of new-born babies were offered a free examination of their drinking water. After a written declaration of consent had been obtained and after the infant in question had reached an age of 3 months, a stagnation sample of cold tap-water after overnight stagnation together with a random daytime sample was obtained from the family. The collected samples were analysed by atomic absorption spectrometry for their lead concentration. In total, 1485 samples from households were collected. Of the 1434 stagnation samples, 3.1% had lead concentrations greater than 0.01 mg/l (recommended limit of the WHO) and 0.6% had concentrations above the limit of the German drinking water regulation (0.04 mg/l). The values for the 1474 random daytime samples were 2.1% above 0.01 mg/l and 0.2% greater than 0.04 mg/l, respectively. By region, the areas Bovenden, Friedland, Duderstadt, Northeim and Rosdorf were particularly affected. The highest measured concentrations of lead in the stagnation samples were 0.11 mg/l and 0.15 mg/l in the random daytime samples, respectively.     

A new methodology towards determining building performance under modified outdoor conditions

Great efforts have been made to establish the influence of the urban climate upon the energy consumption of buildings. While many scientific articles present measured data of increased energy consumption due to building surroundings, this paper aims to present a straightforward methodology for the assessment of building performance under modified outdoor conditions. Designers and urban planners should benefit from the results of this paper in their evaluation of proposals to decrease building energy consumption. A number of examples are discussed in order to illustrate the methodology outlined.     

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

Development of Brazilian steel construction

This article presents a concise short overview of the development of the steel industry in Brazil, with the emphasis on civil construction. The relatively rapid increase in the application of steel structures for both low and tall buildings and the modern bridges in Brazil are the results of an extensive effort of the steel producers and the improvement of steel courses and research programmes in several universities and institutions during the last two decades. The steel industry in collaboration with the universities, which have provided the results of their recent studies, contributed to the improved steel technologies and composite construction. Data, supplied by the Brazilian Institute of Metallurgy, IBS, is presented on the actual steel production and fabrication with regard to application in civil engineering. Case studies of steel structures, such as multi-storey buildings, space structures, light gauge steel construction and bridges, are presented and commented on. Further, steel structures subjected to corrosion or to fire, as well as steel and composite semi-rigid joints, are mentioned and finally the Brazilian experience with steel architecture is introduced.     

Activated charcoal and microflora in water treatment

Significant sanitation was achieved by using 0.5% activated charcoal in influent and effluent of a wastewater treatment plant. The drastic reduction in the microorganisms was confirmed for twelve tester strains, including gram-positives, gram-negatives, Candida albicans, Vahlkampfia avara, Leptospira biflexa and Trichomonas foetus. The removal of microflora correlates positively with the quality of the activated charcoal used. Once adsorbed, the bacteria could not be eluted by salt, alkalinization or citric acid. Diatomaceous earth also eliminated some of the microflora, but white clay (Bolus alba) and zinc dust are inefficient. The activated carbon may be reused several times after regeneration by heat (2 h at 160°C), but eventually a slight decrease in adsorbing capacity occurs.     

Analysis of point load test as a method for preliminary geotechnical classification of rocks

This paper deals with the analysis of the point load compression test made on irregular-shaped rock fragments, proposed in the late 50’s by Protodiakonov. An ample revision of the literature on the subject has been made, and a series of tests, using seven different types of rock materials, has been developed. The results obtained from these tests showed that parameters generally used in literature to relate the unconfined compressive (or tensile) strength of materials, resulting from point load tests, can lead to scattered results, due mainly to the scale effect, of great evidence in such tests. It seems possible to obtain compressive (and tensile) strength of rocks, if the ratio between failure load and the distance between load application poins, with a 3/2 exponent, is considered, in field work, as being the "point load strength index".

---

Resume L’article présente une analyse critique de l’essai de compression sur échantillons irréguliers de roche, proposé par Protodiakonov vers la fin des années 50. Tout d’abord on a fait une révision de la littérature disponible sur le sujet et, après, une série d’essais sur sept types différents de matériaux. Les résultats obtenus ont montré que les paramètres plus utilisés, dans la littérature, pour définir la résistance à la compression (ou traction) des roches, d’après les essais ponctuels, peuvent provoquer une dispersion très importante des résultats. Cependant, il nous semble valable de suggérer la possibilité de déterminer, sur le chantier, la résistance à la compression (ou traction) des roches, si l’on considère le quotient entre la charge de rupture et la distance entre les deux points d’application de cette charge, le dénominateur à la puissance 3/2, comme "l’indice de charge ponctuelle".