Laws of Formation of Electrospark Coatings from Alloys of the Ni – Cr – Al – Y System

The main parameters of electrospark alloying of steel 45 with anodes made from Ni – Cr – Al – Y alloys have been investigated. The anodes were fabricated by casting and hot pressing. The highest values of the mass transfer coefficient were observed in the case of electrospark alloying with hot-pressed alloys. Microstructure and x-ray phase analyses of electrospark coatings revealed the presence of solid solutions based on nickel, iron, chromium as well as intermetallic compounds. Coatings obtained by electrospark alloying with hot-pressed alloy are more wear-resistant than are coatings obtained by alloying with cast alloys.     

Role of Chiral Configuration in the Photoinduced Interaction of D- and L-Tryptophan with Optical Isomers of Ketoprofen in Linked Systems

The study of the L- and D-amino acid properties in proteins and peptides has attracted considerable attention in recent years, as the replacement of even one L-amino acid by its D-analogue due to aging of the body is resulted in a number of pathological conditions, including Alzheimer’s and Parkinson’s diseases. A recent trend is using short model systems to study the peculiarities of proteins with D-amino acids. In this report, the comparison of the excited states quenching of L- and D-tryptophan (Trp) in a model donor–acceptor dyad with (R)- and (S)-ketoprofen (KP-Trp) was carried out by photochemically induced dynamic nuclear polarization (CIDNP) and fluorescence spectroscopy. Quenching of the Trp excited states, which occurs via two mechanisms: prevailing resonance energy transfer (RET) and electron transfer (ET), indeed demonstrates some peculiarities for all three studied configurations of the dyad: (R,S)-, (S,R)-, and (S,S)-. Thus, the ET efficiency is identical for (S,R)- and (R,S)-enantiomers, while RET differs by 1.6 times. For (S,S)-, the CIDNP coefficient is almost an order of magnitude greater than for (R,S)- and (S,R)-. To understand the source of this difference, hyperpolarization of (S,S)-and (R,S)- has been calculated using theory involving the electron dipole–dipole interaction in the secular equation.     

The influence of poly(3,4-ethylenedioxythiophene) modification on the transport properties and fuel cell performance of Nafion-117 membranes

Nafion-117/PEDOT composite membranes were synthesized by in situ chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using ammonium persulfate as an oxidant. The polymerization of EDOT in Nafion membranes for various EDOT/oxidant treatment sequences was studied for the first time. PEDOT introduction leads to a slight decrease in both the ion-exchange capacity and water uptake of the composite membranes, as well as to an increase in cationic transport. Membranes initially treated with an oxidant exhibit better conductivity and lower hydrogen permeability. The effect of both modification of Nafion-117 membranes by PEDOT and hot-pressing of hydrogen-oxygen membrane-electrode assemblies (MEAs) on the performance of proton-exchange membrane fuel cells was studied. The maximum power density of the fabricated MEAs increases 1.5-fold: from 510 (for a pristine Nafion-117 membrane) to 810 mW cm⁻² (for a membrane modified by PEDOT). The current density at a voltage of 0.4 V reaches 1248 and 2246 mA cm⁻², respectively.     

Solders development and application process for a micro chip-camera

Nowadays, micro components have to fulfill rising optical requirements for different scientific and industrial fields like astronomy, medicine or multimedia. For this purpose, advanced miniaturized chip-cameras are produced for the microsystems engineering market. The assembly and joining technologies play a very important role in the production of these micro components. Several challenges are associated with the joining of chip-cameras. In this study, the application of the soldering technology has been considered in order to face these challenges. Two joining technologies have been investigated: active soldering and transient liquid phase (TLP) bonding. Both soldering processes have shown a big potential for hybrid microsystems joining in previous studies. For both processes, soldering alloys and parameters have been conceived in order to fulfill the joining requirements of the micro camera components. For instance, the joining temperature represents a major challenge because the chip-camera consists of a plastic material, polymethyl methacrylate (PMMA). Therefore, particular attention has been directed to the soldering as well as to the coating temperature. The experimental investigations concerning the solders application through physical vapor deposition (PVD) have been supported by finite element method (FEM) simulations. The analysis of  the temperature distribution in the micro components during the coating process was the focus of  the calculations. Possible undesirable local overheated areas of the chip-camera components can be detected through simulation.

---

Urinary proteomic analysis of chronic allograft nephropathy

The pathogenesis of progressive renal allograft injury, which is termed chronic allograft nephropathy (CAN), remains obscure and is currently defined by histology. Prospective protocol-biopsy trials have demonstrated that clinical and standard laboratory tests are insufficiently sensitive indicators of the development and progression of CAN. The study aim was to determine if CAN could be characterized by urinary proteomic data and identify the proteins associated with disease. The urinary proteome of 75 renal transplant recipients and 20 healthy volunteers was analyzed using surface enhanced laser desorption and ionization MS. Patients could be classified into subgroups with normal histology and Banff CAN grades 2-3 with a sensitivity of 86% and a specificity of 92% by applying the classification algorithm Adaboost to urinary proteomic data. Several urinary proteins associated with advanced CAN were identified including α1-microglobulin, β2-microglobulin, prealbumin, and endorepellin, the antiangiogenic C-terminal fragment of perlecan. Increased urinary endorepellin was confirmed by ELISA and increased tissue expression of the endorepellin/perlecan ratio by immunofluoresence analysis of renal biopsies. In conclusion, analysis of urinary proteomic data has further characterized the more severe CAN grades and identified urinary endorepellin, as a potential biomarker of advanced CAN.     

Physiological and Pathological Remodeling of Cerebral Microvessels

There is growing evidence that the remodeling of cerebral microvessels plays an important role in plastic changes in the brain associated with development, experience, learning, and memory consolidation. At the same time, abnormal neoangiogenesis, and deregulated regulation of microvascular regression, or pruning, could contribute to the pathogenesis of neurodevelopmental diseases, stroke, and neurodegeneration. Aberrant remodeling of microvesselsis associated with blood–brain barrier breakdown, development of neuroinflammation, inadequate microcirculation in active brain regions, and leads to the dysfunction of the neurovascular unit and progressive neurological deficits. In this review, we summarize current data on the mechanisms of blood vessel regression and pruning in brain plasticity and in Alzheimer’s-type neurodegeneration. We discuss some novel approaches to modulating cerebral remodeling and preventing degeneration-coupled aberrant microvascular activity in chronic neurodegeneration.     

A Role of DNA Methylation within the CYP17A1 Gene in the Association of Genetic and Environmental Risk Factors with Stress-Related Manifestations of Schizophrenia

As genetic and environmental influences on schizophrenia might converge on DNA methylation (DNAm) within loci which are both associated with the disease and implicated in response to environmental stress, we examined whether DNAm within CYP17A1, a hypothalamus–pituitary–adrenal axis gene which is situated within the schizophrenia risk locus 10q24.32, would mediate genetic and environmental effects on stress-related schizophrenia symptoms. DNAm within an exonic–intronic fragment of CYP17A1 was assessed in the blood of 66 schizophrenia patients and 63 controls using single-molecule real-time bisulfite sequencing. Additionally, the VNTR polymorphism of the AS3MT gene, a plausible causal variant within the 10q24.32 locus, was genotyped in extended patient and control samples (n = 700). The effects of local haplotype, VNTR and a polyenviromic risk score (PERS) on DNAm, episodic verbal memory, executive functions, depression, and suicidality of patients were assessed. Haplotype and PERS differentially influenced DNAm at four variably methylated sites identified within the fragment, with stochastic, additive, and allele-specific effects being found. An allele-specific DNAm at CpG-SNP rs3781286 mediated the relationship between the local haplotype and verbal fluency. Our findings do not confirm that the interrogated DNA fragment is a place where genetic and environmental risk factors converge to influence schizophrenia symptoms through DNAm.