Mixed waste ferrite as a novel sorbent for carbon dioxide derived from flue gases

Ferrite is a potential sorbent for flue gases such as CO₂, H₂S and SO₂. This paper discusses the adsorption and decomposition of CO₂ into carbon by hydrogen-activated waste ferrites prepared from Berkeley Pit acid mine water (Butte, MT). The decomposition effectiveness of these waste ferrites was studied at 300 °C and compared with the synthetic magnetite obtained from ferrous sulfate solution in our laboratory. The decomposition was measured by two methods: indirectly by measuring the adsorption rate of CO₂ and directly by analysing the carbon deposited on the samples. The results indicated that the mixed waste ferrite had good affinity for the adsorption and decomposition. The CO₂ decomposition data of both sorbents fitted the first-order reaction kinetics. Even though the surface area of the magnetite was higher than that of waste ferrite, the CO₂ decomposition rate of the waste ferrite was estimated to be 2.5 times higher than that of magnetite under identical conditions. The carbon analysis deposited on the sample indicated that the CO₂ was 100% decomposed into carbon and other carbon/hydrogen compounds by the waste ferrite, whereas the conversion was 43% by the magnetite. In terms of specific adsorption of carbon, ferrite was three to five times more efficient than magnetite.     

High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Protein-energy malnutrition and oxidative injury in growing rats

1. Weaning rats were fed ad libitum isocaloric diets containing 5% and 20% casein based proteins. 5% protein diet was protein deficient diet. Pair fed rats with the 5% protein group were maintained simultaneously on 20% protein diet but the amount restricted to the amount taken up by PEM group. 2. Glutathione, antioxidative enzymes, lipid peroxidation and histopathological studies in liver and only glutathione and antioxidative enzymes in blood were carried out. 3. Rats fed the 5% protein diet developed a severe protein energy malnutrition (PEM) whereas those on pair-fed diet developed mild to moderate PEM. 4. Glutathione related thiols superoxide dismutase, glutathione peroxidase, catalase and glutathione-Stransferase with (1 Chloro 2,4-dinitro benzene (CDNB) substrate) were decreased in liver with concomitant increase of lipid peroxidation in severe PEM. In blood glutathione, glutathione peroxidase and catalase were decreased while superoxide dismutase was increased in severe PEM group. 5. Mild to moderate PEM (pair-fed group) also resulted in similar changes in liver except glutathione peroxidase, lipid peroxidation in liver and superoxide dismutase in blood. 6. Hepatic injury was detectable only in the severe PEM group. 7. Oxidative-stress and hepatic injury occurred in severe PEM and to a lesser degree in mild to moderate PEM.     

A micromachined electrochemical sensor for free chlorine monitoring in drinking water.

In this work, we designed, fabricated and tested a disposable, flow-through amperometric sensor for free chlorine determination in water. The sensor is based on the principle of an electrochemical cell. The substrate, as well as the top microfluidic layer, is made up of a polymer material. The advantages include; (a) disposability from low cost; (b) stable operation range from three-electrode design; (c) fluidic interconnections that provide on line testing capabilities; and (d) transparent substrate which provides for future integration of on-chip optics. The sensor showed a good response and linearity in the chlorine concentration ranging from 0.3 to 1.6 ppm, which applies to common chlorination process for drinking water purification.     

A graded diameter and oriented nanorod–thin film structure for solar cell application: a device proposal

This paper presents a device proposal based on a junction between an absorbing semiconductor nanorod structure and another window semiconductor layer for solar cell application. The possibility of band gap tuning by varying the diameter of the nanorods along the length, higher absorption coefficient at nanodimensions, the presence of a strong electrical field at the nanorod-window semiconductor nanojunctions and the carrier confinement in lateral direction are expected to result in enhanced absorption and collection efficiency in the proposed device. Process steps, feasibility, technological tasks needed for the realization of the proposed structure and the novelty of the present structure in comparison to the already reported nanostructured solar cells are also discussed.     

Potential bioreductively activated hypoxia probes and post-irradiation radiosensitizers related to NITP

NITP (1) is an effective marker of hypoxia in tumours for both microscopy and cell sorting studies and, additionally, the compound shows post-irradiation sensitization, probably by inhibition of repair of radiation damage to DNA. However, NITP does not have the substitution pattern which the immunochemical reagents are raised to recognize and the compound has very low solubility in water. We report the synthesis of an isomer (13) of NITP which has the desirable substitution pattern and is also soluble in very weak aqueous base. The successful synthesis of 13 uses a nitrosation and cyclization of a substituted uracil (16), but earlier approaches from 5 and 12 yielded the pyridoxanthine derivative 6. The preparative use of nitro group displacement reactions from 8-nitrocaffeine is shown to be a useful entry to a range of 8-substituted caffeines and is utilized to obtain two derivatives of NITP which carry aliphatic amine chains, i.e. 34 and 35.     

An intelligent hybrid approach for hepatitis disease diagnosis: Combining enhanced k‐means clustering and improved ensemble learning

In real world, the automatic detection of liver disease is a challenging problem among medical practitioners. The intent of this work is to propose an intelligent hybrid approach for the diagnosis of hepatitis disease. The diagnosis is performed with the combination of k‐means clustering and improved ensemble‐driven learning. To avoid clinical experience and to reduce the evaluation time, ensemble learning is deployed, which constructs a set of hypotheses by using multiple learners to solve a liver disease problem. The performance analysis of the proposed integrated hybrid system is compared in terms of accuracy, true positive rate, precision, f‐measure, kappa statistic, mean absolute error, and root mean squared error. Simulation results showed that the enhanced k‐means clustering and improved ensemble learning with enhanced adaptive boosting, bagged decision tree, and J48 decision tree‐based intelligent hybrid approach achieved better prediction outcomes than other existing individual and integrated methods.     

Ionic conductivity and interfacial properties of polymer electrolytes based on PEO and boroxine ring polymer

Blended polymer electrolytes based on poly(ethylene oxide) (PEO) and boroxine ring polymer (BP) solvated with lithium triflate were formulated and evaluated. Compared to PEO–salt polymer electrolyte, ionic conductivities of blended polymer electrolytes were two orders of magnitude higher in a low‐temperature range; as well, lithium transference numbers were increased to ～ 0.4. These were due to the increased mobility and anion trapping of boroxine rings. BP also exhibited the stabilizing effect on lithium–polymer electrolyte interface, and a reduced interfacial resistance between lithium metal and the polymer electrolyte was found with increasing of BP content. Polymer electrolytes based on PEO and BP are suitable for use in lithium secondary battery. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 17–21, 2002; DOI 10.1002/app.10090     

Antioxidative effect of Ajowan in a model system

Model conditions were utilized to test the antioxidative activity of a methanolic extract of ajowan (Carum coptimum) (MEA). MEA was less effective than butylated hydroxytoluene in protecting against oxidation of emulsified linoleic acid measured by coupled oxidation of linoleic acid-β-carotene, conjugated diene values, and the thiobarbituric acid values. Ajowan may have potential as a source of natural antioxidant.