Strategies for FH/MFSK Signaling with Diversity in Worst-Case Partial-Band Noise

Optimum diversity and worst-case partial-band noise jamming conditions have been derived for noncoherent energy detection of frequency-hopped (FH)M-ary frequency-shift keyed (MFSK) signals using a soft-chip decision suboptimum linear combining metric with perfect jamming-state side information. However, the assumption implicit in previous publications is that the error rate is first maximized over the jammer's partial-band duty factor for arbitrary diversity, and the result is then minimized over the amount of diversity. This paper shows that if the order of optimization is reversed, different conditions and performance are produced; that is, the previous solution is not a saddlepoint. This introduces some game-theoretic considerations for the communicator and the jammer, the risks and advantages of which are explored.     

Mechanical Load and Piezo1 Channel Regulated Myosin II Activity in Mouse Lenses

The cytoarchitecture and tensile characteristics of ocular lenses play a crucial role in maintaining their transparency and deformability, respectively, which are properties required for the light focusing function of ocular lens. Calcium-dependent myosin-II-regulated contractile characteristics and mechanosensitive ion channel activities are presumed to influence lens shape change and clarity. Here, we investigated the effects of load-induced force and the activity of Piezo channels on mouse lens myosin II activity. Expression of the Piezo1 channel was evident in the mouse lens based on immunoblot and immufluorescence analyses and with the use of a Piezo1^-tdT transgenic mouse model. Under ex vivo conditions, change in lens shape induced by the load decreased myosin light chain (MLC) phosphorylation. While the activation of Piezo1 by Yoda1 for one hour led to an increase in the levels of phosphorylated MLC, Yoda1 treatment for an extended period led to opacification in association with increased calpain activity and degradation of membrane proteins in ex vivo mouse lenses. In contrast, inhibition of Piezo1 by GsMTx4 decreased MLC phosphorylation but did not affect the lens tensile properties. This exploratory study reveals a role for the mechanical load and Piezo1 channel activity in the regulation of myosin II activity in lens, which could be relevant to lens shape change during accommodation.     

Harmonizing agriculture and health sector actions to improve household nutrition: policy experiences from Afghanistan (2002–2007)

Coordination across sectors to address undernutrition with its varied underlying causes remains a challenge in developing countries. In Afghanistan, harmonization of health and agriculture policies and actions to reduce endemic undernutrition occurred during 2002-2007. This qualitative case study explores the forms of harmonization, enabling features and constraints in the policy process. We interviewed 57 stakeholders (39 central level, 18 provincial) involved in public nutrition or food security issues. Forms of harmonization included written policies, reseach, training and advocacy. Important features of the policy process included: policy entrepreneurs with operational and strategic capacity, consensus-building using a shared causal framework, working groups and strategic alliances. This case presents an interesting alternative to a national nutrition coordinating body, an approach that has met with mixed results, often due to the lack of authority, budget, and operational capacity of such a body to oversee ministries and enforce national nutrition objectives. Mid-level professionals mobilized into task forces achieved much with the support of national and international partners. This study highlights the importance of building capacity for sustaining change through local institutions.     

White Electroluminescence by Supramolecular Control of Energy Transfer in Blends of Organic‐Soluble Encapsulated Polyfluorenes

Here, it is demonstrated that energy transfer in a blend of semiconducting polymers can be strongly reduced by non‐covalent encapsulation of one constituent, ensured by threading of the conjugated strands into functionalized cyclodextrins. Such macrocycles control the minimum intermolecular distance of chromophores with similar alignment, at the nanoscale, and therefore the relevant energy transfer rates, thus enabling fabrication of white‐light‐emitting diodes (CIE coordinates: x = 0.282, y = 0.336). In particular, white electroluminescence in a binary blend of a blue‐emitting, organic‐soluble rotaxane based on a polyfluorene derivative and the green‐emitting poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole ( F8BT ) is achieved. Morphological and structural analyses by atomic force microscopy, fluorescence mapping, µ‐Raman, and fluorescence lifetime microscopy are used to complement optical and electroluminescence characterization, and to enable a deeper insight into the properties of the novel blend.     

MXene Composite and Coaxial Fibers with High Stretchability and Conductivity for Wearable Strain Sensing Textiles

The integration of nanomaterials with high conductivity into stretchable polymer fibers can achieve novel functionalities such as sensing physical deformations. With a metallic conductivity that exceeds other solution‐processed nanomaterials, 2D titanium carbide MXene is an attractive material to produce conducting and stretchable fibers. Here, a scalable wet‐spinning technique is used to produce Ti₃C₂T_x MXene/polyurethane (PU) composite fibers that show both conductivity and high stretchability. The conductivity at a very low percolation threshold of ≈1 wt% is demonstrated, which is lower than the previously reported values for MXene‐based polymer composites. When used as a strain sensor, the MXene/PU composite fibers show a high gauge factor of ≈12900 (≈238 at 50% strain) and a large sensing strain of ≈152%. The cyclic strain sensing performance is further improved by producing fibers with MXene/PU sheath and pure PU core using a coaxial wet‐spinning process. Using a commercial‐scale knitting machine, MXene/PU fibers are knitted into a one‐piece elbow sleeve, which can track various movements of the wearer's elbow. This study establishes fundamental insights into the behavior of MXene in elastomeric composites and presents strategies to achieve MXene‐based fibers and textiles with strain sensing properties suitable for applications in health, sports, and entertainment.     

Neural basis for the genesis and control of digitalis arrhythmias

The author discussed the increase in the frequency of traumatic paralyses of the ocular muscles, and reported 6 cases of inferior oblique muscle paresis caused by local blunt or sharp traumas (haematoma, contusion, rupture, incarceration) and one case of traumatic Brownian pseudo-paralysis. The localisation of the injuries in 3 cases was on the inferior temporal part and in the other 3 cases on the superior part of the bulbar conjunctiva. Atypical horizontal deviation and characteristic vertical deviation, torsion and torticollis were observed in the majority of cases. One patient recovered spontaneously. 3 patients became asymptomatic after correction by prisms and one after recession of contralateral superior rectus muscle. The symptoms remained unchanged in the case of a "blow out" fracture (in spite of operation) and a Brown's syndrome (without treatment).     

Optimum Frame Synchronization for Biorthogonally Coded Data

The optimum procedure for locating a sync word periodically inserted in uncoded binary data received over a binary symmetric channel is based on the Hamming or bit distance metric. This concise paper addresses the corresponding frame-sync problem for biorthogonally coded data transmitted over the additive white Gaussian noise (AWGN) channel. For conceptual convenience, thek-bit words from the decoder output are treated as "super symbols" from an alphabet of dimension 2^k. It is argued that the optimum sync-word search over the decoded data stream is based on a supersymbol distance rule matched to the properties of the biorthogonally coded transmissions over the noisy channel. An optimum frame-sync acquisition algorithm based on this distance rule is formulated, and its performance is investigated. As an example, the performance of this optimum frame-sync algorithm is contrasted analytically with that of a Hamming distance algorithm operating on decoded (32, 6) biorthogonal data, a case of interest to some recent unmanned American space missions.     

Hyperspectral Imaging-Based Classification and Wavebands Selection for Internal Defect Detection of Pickling Cucumbers

Hyperspectral imaging is useful for detecting internal defects of pickling cucumbers. The technique, however, is not yet suitable for high-speed online implementation due to the challenges in analyzing large-scale hyperspectral images. This research aimed to select the optimal wavebands from the hyperspectral image data, so that they can be deployed in either a hyperspectral or multispectral imaging-based inspection system for the automatic detection of internal defects of pickling cucumbers. Hyperspectral reflectance (400–700 nm) and transmittance (700–1,000 nm) images were acquired, using an in-house developed hyperspectral imaging system running at two conveyor speeds of 85 and 165 mm/s, for 300 “Journey” pickling cucumbers before and after internal damage was induced by mechanical load. Minimum redundancy–maximum relevance (MRMR) was used for optimal wavebands selection, and the loadings of principal component analysis (PCA) were also applied for qualitatively identifying the important wavebands that are related to the specific features. Discriminant analysis with Mahalanobis distance classifier was performed for the two-class (i.e., normal and defective) and three-class (i.e., normal, slightly defective, and severely defective) classifications using the mean spectra and textural features (energy and variance) from the regions of interest in the spectral images at selected waveband ratios. The classification results based on MRMR wavebands selection were generally better than those from PCA-based classifications. The two-band ratio of 887/837 nm from MRMR gave the best overall classification results, with the accuracy of 95.1 and 94.2 % at the conveyor speeds of 85 and 165 mm/s, respectively, for the two-class classification. The highest classification accuracies for the three-class classification based on the optimal two-band ratio of 887/837 nm were 82.8 and 81.3 % at the conveyor speeds of 85 and 165 mm/s, respectively. The mean spectra-based classification achieved better results than the textural feature-based classification, except in the three-class classification for the higher conveyor speed. The overall classification accuracies for all selected waveband ratios at the low conveyor speed were slightly higher than those at the higher conveyor speed, since the low speed resulted in more scan lines, thus higher spatial resolution hyperspectral images. The identified two-band ratio of 887/837 nm in transmittance mode could be applied for fast real-time internal defect detection of pickling cucumbers.     

Double emulsions (W/O/W): physical characteristics and perceived intensity of salty taste

This study addressed the correlation between physical characteristics of double emulsions and sensory perception, as the microstructure of these systems may provide the mechanism to understanding the initial cause of the altered salty taste. Thus, double emulsions (W/O/W) were prepared using different volumes of the internal aqueous phase while maintaining the same fat and sodium contents in the evaluated systems. Polyglycerol polyricinoleate (PGPR) and tween 80 were used as hydrophobic and hydrophilic emulsifiers, respectively. After preparation, the samples were stored at 25 °C for 4 days and submitted to analysis of optical microscopy, distribution and polydispersity of the oil droplets size, electrical conductivity, rheological behaviour and sensorial analysis. It was found that the use of different emulsifier concentrations (PGPR) did not influence the physical characteristics of the emulsions with the same formulation, but emulsions with different internal aqueous phase concentrations presented different results. These distinct characteristics may have influenced sensorial perception, as the emulsion with higher internal phase concentration was considered saltier. Thus, it can be concluded that structural differences of the double emulsions can be used to decrease the sodium contents without perceivable changes in salty taste.     

Vacuum impregnation of chitosan‐based edible coating in minimally processed pumpkin

The goal of this research was to evaluate the use of vacuum impregnation (VI) and soaking techniques (ST) in the application of edible coatings of chitosan and chitosan + lauric acid to minimally processed pumpkins (MPP). The vacuum impregnation method led to greater component incorporation (5.9% and 1.75%, respectively) in the pumpkins when compared to soaking and consequently the formation of more uniform, thicker coatings (25.6 and 22.3 μm, respectively). However, VI caused greater changes in pH, acidity, colour and firmness. Relating to water content and carotenoid content, noncoated pumpkins presented greater losses during the storage period, regardless of impregnation method. The pumpkins with edible coatings, regardless of method, presented lower numbers of psychrotrophic micro‐organisms and coliforms during the storage period. Therefore, soaking was considered the best method for the application of chitosan‐based edible coatings to minimally processed pumpkins, as it led to smaller changes in the properties of the product.