Influence of the Cooling Temperature on the Mechanical Behavior of an Oxidized Self-Healing Ceramic Matrix Composite

Composites made of ceramic for both fibers and matrix are aimed at being used in aerospace applications, which means being submitted to mechanical stresses at high temperatures in oxidizing and corrosive environments for long durations. The oxidation/corrosion resistance of these materials is linked to their ability to self-heal by creating an oxide phase which can restrict the access of the oxygen into the bulk of the material. During thermomechanical cycles, the distribution of O₂ inside the material as well as the distribution and the state of the liquid oxides will undergo some modifications. A specific test has been conceived and performed in order to evidence the influence of the viscosity of this oxide on the mechanical properties of the material. Results have shown that the stiffening which is observed seems to be proportional to the increase in the viscosity of the sealing oxide, in conjunction with the decrease in the temperature.     

Accuracy vs Efficiency Trade-offs in Optical Flow Algorithms

There have been two thrusts in the development of optical flow algorithms. One has emphasized higher accuracy; the other faster implementation. These two thrusts, however, have been independently pursued, without addressing the accuracy vs efficiency trade-offs. Although the accuracy–efficiency characteristic is algorithm dependent, an understanding of a general pattern is crucial in evaluating an algorithm as far as real-world tasks are concerned, which often pose various performance requirements. This paper addresses many implementation issues that have often been neglected in previous research, including temporal filtering of the output stream, algorithms' flexibility, and robustness to noise, subsampling, etc. Their impacts on accuracy and/or efficiency are emphasized. We present a survey of different approaches toward the goal of higher performance and present experimental studies on accuracy vs efficiency trade-offs. A detailed analysis of how this trade-off affects algorithm design is manifested in a case study involving two state-of-the-art optical flow algorithms: a gradient and a correlation-based method. The goal of this paper is to bridge the gap between the accuracy- and the efficiency-oriented approaches.     

Large Bolometer Arrays with Superconducting NbSi Sensors for Future Space Experiments

New techniques in microelectronics allow to build large arrays of bolometers filling the focal plane of submillimeter and millimeter telescopes. The expected sensitivity increase is the key for the next generation of space experiments in this wavelength range. Superconducting bolometers offer currently the best prospects in terms of sensitivity and multiplexed readout. We present here the developments led in France based on NbSi alloy thermometers. The manufacturing process of a 23 pixel array and the test setup are described.      

Transient frequency shift in a single-mode quasi-continuousdiode-pumped Nd:YAG laser

The transient frequency shift of a quasi-continuous single-mode frequency-doubled diode-pumped Nd:YAG ring laser has been measured using a confocal spherical Fabry-Perot. At a rate of 50 Hz, a quasi-linear shift of 5.4 MHz at the fundamental 1.06-μm wavelength has been measured during the 150-μs laser pulse duration. The doubled frequency, which is obtained by an intracavity LBO crystal, shows also a similar but doubled linear shift. This observed frequency shift is interpreted as due to thermal effects in the rod and fits well a modeling of the pulsed laser diode pumping. Introducing intracavity compensation, a piezoceramic transducer mounted cavity mirror, has limited the observed shift to less than ±1 MHz. Such a quasi-continuous Nd:YAG single-mode and frequency stabilized device should be a very suitable single-mode laser source to pump optical parametric oscillator systems     

Characterization and Physical Explanation of Energetic Particles on Planck HFI Instrument

The Planck High Frequency Instrument (HFI) has been surveying the sky continuously from the second Lagrangian point (L2) between August 2009 and January 2012. It operates with 52 high impedance bolometers cooled at 100 mK in a range of frequency between 100 GHz and 1 THz with unprecedented sensitivity, but strong coupling with cosmic radiation. At L2, the particle flux is about 5 \(\hbox {cm}^{-2}\,\hbox {s}^{-1}\) and is dominated by protons incident on the spacecraft. Protons with an energy above 40 MeV can penetrate the focal plane unit box causing two different effects: glitches in the raw data from direct interaction of cosmic rays with detectors (producing a data loss of about 15 % at the end of the mission) and thermal drifts in the bolometer plate at 100 mK adding non-Gaussian noise at frequencies below 0.1 Hz. The HFI consortium has made strong efforts in order to correct for this effect on the time ordered data and final Planck maps. This work intends to give a view of the physical explanation of the glitches observed in the HFI instrument in-flight. To reach this goal, we performed several ground-based experiments using protons and \(\alpha \) particles to test the impact of particles on the HFI spare bolometers with a better control of the environmental conditions with respect to the in-flight data. We have shown that the dominant part of glitches observed in the data comes from the impact of cosmic rays in the silicon die frame supporting the micro-machined bolometric detectors propagating energy mainly by ballistic phonons and by thermal diffusion. The implications of these results for future satellite missions will be discussed.     

Design and performance of the dilution cooler system for the Planck mission

We report the design, main features and on-ground qualification of the dilution cooler qualification model for the Planck mission. We mainly emphasize the innovative cryogenics and structural aspects developed in order to meet the severe requirements of the mission. We also report the results of the dilution cooler itself in the 100 mK range after successful tests of the qualification model on a dedicated test bench.     

Sewage impact on shellfish microbial contamination.

Coastal areas are frequently contaminated by microorganisms of human origin, due to high population density and low seawater renewal. To evaluate the impact of wastewater input on shellfish quality, a study was conducted in Brittany (France) over a period of 20 months. A hydrodynamic model was used to simulate wastewater impact on microbial water quality. To validate the model, wastewater from the three main sewage treatment plants and shellfish from three sites were sampled monthly. Bacterial indicators (E. coli), F-RNA phages were searched for by culture and noroviruses by RT-PCR and hybridisation. These microorganisms were detected in the three effluents and clams, with no marked seasonal variation. The microbial concentrations in the two oyster beds, distant from the effluent outfall, were low, and only three of the samples were positive for norovirus. For simulation, the winter wastewater inputs of E. coli and phages were calculated and an estimation for norovirus flux was made from the epidemic situation in the population. The microbial behaviour was included in the model by a decay-rate factor. Results from the model calculations were found to be very similar to E. coli and phage concentrations observed in shellfish. For noroviruses, the model indicated that shellfish distant from the wastewater input were under the detection limit of the RT-PCR method. This study demonstrated the use of modelisation to interpret norovirus contamination in various areas.     

The tightness of retail packaging: A selection of test methods to be used for a wide range of packed products

The tightness of retail packagings and of their closures is of primary importance both for domestic and industrial products. For this reason, a research programme designed to establish proper testing methods for a wide range of ‘packaging + product’ combinations, in order to check their tightness or permeability, was set up. All the available testing methods were reviewed, the most reliable ones selected and their sensitivity determined. More than 200 combinations of ‘packaging + product’ belonging to five families of consumer products were examined and their tightness/permeability problems noted. Finally, specific testing methods were assigned to each combination of ‘packaging + product’. All these examples are currently in use in the packaging laboratory as a guideline for the testing of every kind of packaging.     

Comparative mutagenicity of N-nitrosamines in a semi-solid and in a liquid incubation system in the presence of rat or human tissue fractions

The rat liver microsome-mediated mutagenicities of a series of N-nitrosodialkylamines and heterocyclic N-nitrosamines were determined in a liquid incubation system using Salmonella typhimurium TA1530. The influence on mutation frequency of the concentration of co-factors for mixed-function oxidase and composition and molarity of the buffer was investigated, using N-nitrosomorpholine as substrate. The mutagenicity of the N-nitroso compounds in the liquid incubation system under optimal reaction conditions at equimolar concentration was compared quantitatively with that obtained in a soft-agar incorporation assay. N-Nitrosodi-n-pentylamine and N-nitrosodi-n-butylamine showed no enzyme-mediated mutagenicity in the liquid incubation system, and metabolically activated N-nitroso-dimethylamine and N-nitroso-diethylamine showed negligible mutagenic activity in the soft-agar assays. In contrast with these results with the N-nitrosodialkylamines, the mutagenic effects of heterocyclic N-nitrosamines were similar in the liquid incubation system and in soft-agar incorporation assays. The heterocyclic N-nitrosamines showed rat-liver microsome-mediated mutagenicity in the following descending order: N-nitrosomorpholine greater than N-nitrosopyrrolidine greater than N-nitrosopiperidine greater than N-nitroso-N'-methylpiperazine. Seven human liver specimens converted all heterocyclic N-nitrosamines into mutagens; this activity was similar to that of rat liver, except that for N-nitroso-N'-methylpiperazine, fractions from three human liver biopsies were three to 30 times more active than those from untreated rats. The specific reversion of S. typhimurium TA1530 to histidine prototrophy provides experimental evidence that all the N-nitrosamines studied were converted by liver microsomal enzymes into monofunctional alkylating agents.