Efficient compensation for frequency-dependent errors in analog reconstruction filters used in IQ modulators

In a direct-conversion transmitter system, the nonideal transfer characteristics of practical analog subsystems can have significant adverse effects on the performance of the transmitter system. While a significant body of research exists on correcting static errors (including gain imbalance, phase errors, and DC offsets) in the analog subsystems, relatively little attention has been paid to the impact of nonideal frequency-dependent characteristics in the analog reconstruction filters that are employed in direct-conversion structures. This paper presents a new computationally efficient and numerically robust method for automatic digital compensation for nonideal frequency-dependent characteristics in the signal reconstruction filters of a quadrature (IQ) modulator structure. The new compensation technique is used in conjunction with existing compensation approaches that compensate for static errors.     

The natural killer cell receptor specific for HLA-A allotypes: a novel member of the p58/p70 family of inhibitory receptors that is characterized by three immunoglobulin-like domains and is expressed as a 140-kD disulphide-linked dimer

Human natural killer (NK) cells express inhibitory receptors that are specific for different groups of HLA-C or HLA-B alleles. The majority of these receptors belong to the immunoglobulin (Ig) superfamily and are characterized by two or three extracellular Ig-like domains. Here we describe a novel inhibitory NK receptor that is specific for a group of HLA-A alleles. The HLA-A3-specific NK cell clone DP7 has been used for mice immunization. Two mAbs, termed Q66 and Q241, bound to the immunizing clone and stained only a subset of NK cell populations or clones. Among Q66 mAb-reactive clones, we further selected those that did not express any of the previously identified HLA-class I-specific NK receptors. These clones did not lyse HLA-A3+ (or -A11+) target cells, but lysis of these targets could be detected in the presence of Q66 or Q241 mAbs. On the other hand, target cells expressing other HLA-A alleles, including -A1, -A2, and -A24, were efficiently lysed. Moreover, none of the HLA-C or HLA-B alleles that were tested exerted a protective effect. Q66+, but not Q66- NK cell clones, expressed messenger RNA coding for a novel 3 Ig domain protein homologous to the HLA-C (p58) and HLA-B (p70) receptors. The corresponding cDNA (cl.1.1) was used to generate transient and stable transfectants in COS7 and NIH3T3 cell lines, respectively. Both types of transfectants were specifically stained by Q66 and Q241 mAbs. Since the cytoplasmic tail of Q66-reactive molecules was at least 11 amino acid longer than the other known p58/p70 molecules, we could generate an antiserum specific for the COOH-terminus of Q66-reactive molecules, termed PGP-3. PGP-3 immunoprecipitated, only from Q66+ NK cells, molecules displaying a molecular mass of 140 kD, under nonreducing conditions, which resolved, under reducing conditions, in a 70-kD band. Thus, differently from the other p58/p70 receptors, Q66-reactive molecules appear to be expressed as disulphide-linked dimers and were thus termed p140. The comparative analysis of the amino acid sequences of p58, p70, and p140 molecules revealed the existence of two cysteins proximal to the transmembrane region, only in the amino acid sequence of p140 molecules.     

Iterative method for the design of DFT filter Bank

Multirate adaptive filters have numerous advantages such as low computational load, fast convergence, and parallelism in the adaptation. Drawbacks when using multirate processing are mainly related to aliasing and reconstruction effects. These effects can be minimized by introducing appropriate problem formulation and employing sophisticated optimization techniques. In this paper, we propose a formulation for the design of a filter bank which controls the distortion level for each frequency component directly and minimizes the inband aliasing and the residual aliasing between different subbands. The advantage of this problem formulation is that the distortion level can be weighted for each frequency depending on the particular practical application. A new iterative algorithm is proposed to optimize simultaneously over both the analysis and the synthesis filter banks. This algorithm is shown to have a unique solution for each iteration. For a fixed distortion level, the proposed algorithm yields a significant reduction in both the inband aliasing and the residual aliasing levels compared to existing methods applied to the numerical examples.     

A new approach to the optimization of robust antenna arrayprocessors

The authors present a method for solving a class of optimization problems with nonsmooth constraints. In particular, they apply the method to the design of narrowband minimum-power antenna array processors which are robust in the presence of errors such as array element placement, look direction misalignment, and frequency offset. They first show that the constrained minimum power problem has a unique global minimum provided that the constraint set is nonempty. Then it is shown how the design problem derived directly from considerations of the sensitivity of the antenna array processor to errors can be transformed into a quadratic programming problem with linear inequality constraints which can be solved efficiently by the standard active set strategy. They also present numerical results for two types of nonsmooth constraints developed to provided robustness. These results confirm the effectiveness of the method     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

Derivative constrained optimum broad-band antenna arrays

The optimization problem corresponding to the design of a presteered broadband processor with maximally flat second-order spatial response in the look direction is discussed. The constraints corresponding to necessary and sufficient conditions for second-order flatness are presented. The nonlinearly constrained optimization approach is unable to consistently locate the global minimum. An approach to solving this problem that essentially converts the nonconvex optimization problem into a parameterized set of convex problems is presented. In the case of 2-D scenarios, the global optimum is determined by finding the roots of a cubic function. The characteristics of the constraints, including the minimum number required and the dependence on the choice of coordinate systems, are examined     

On‐Chip Magnetic Platform for Single‐Particle Manipulation with Integrated Electrical Feedback

Methods for the manipulation of single magnetic particles have become very interesting, in particular for in vitro biological studies. Most of these studies require an external microscope to provide the operator with feedback for controlling the particle motion, thus preventing the use of magnetic particles in high‐throughput experiments. In this paper, a simple and compact system with integrated electrical feedback is presented, implementing in the very same device both the manipulation and detection of the transit of single particles. The proposed platform is based on zig‐zag shaped magnetic nanostructures, where transverse magnetic domain walls are pinned at the corners and attract magnetic particles in suspension. By applying suitable external magnetic fields, the domain walls move to the nearest corner, thus causing the step by step displacement of the particles along the nanostructure. The very same structure is also employed for detecting the bead transit. Indeed, the presence of the magnetic particle in suspension over the domain wall affects the depinning field required for its displacement. This characteristic field can be monitored through anisotropic magnetoresistance measurements, thus implementing an integrated electrical feedback of the bead transit. In particular, the individual manipulation and detection of single 1‐μm sized beads is demonstrated.     

Investigation of polymerizability of ω-alkenyldioxolanes with α-olefins and alkyl vinyl ethers by modified ziegler-natta catalysts

Results are presented of an investigation on the polymerizability of functional olefins, such as allylisopropylidene glycerol (AIPG) and undecenylisopropylidene glycerol (UIPG), in the presence of conventional and modified Ziegler-Natta catalysts based on TiCl₄ or MgCl₂-supported titanium and triisobutylaluminum, hexaisobutyltetraalumoxane, or bisdiethyl-aluminum sulfate. Homopolymerization experiments were performed on AIGP at temperatures of -78, 25, and 50°C; only these at 50°C provided appreciable amounts of polymeric materials insoluble in methanol, whose structures comprise monomeric units derived from opening both dioxolane rings and vinyl double bonds. In spite of all attempts and precautions, polymerization experiments carried out on mixtures of the functional olefins AIPG and UIPG with either 4-methyl-1-pentene or isopropyl vinyl ether gave rise to the homopolymers of the nonfunctional α-olefin and of the vinyl ether, without any appreciable amount of either copolymers or homopolymers of the dioxolane containing monomers. © 1996 John Wiley & Sons, Inc.     

mmr, a Mycobacterium tuberculosis gene conferring resistance to small cationic dyes and inhibitors

The mmr gene, cloned from Mycobacterium tuberculosis, was shown to confer to Mycobacterium smegmatis resistance to tetraphenylphosphonium (TPP), erythromycin, ethidium bromide, acriflavine, safranin O, and pyronin Y. The gene appears to code for a protein containing four transmembrane domains. Studies of [3H]TPP intracellular accumulation strongly suggest that the resistance mediated by the Mmr protein involves active extrusion of TPP.