Full AC analysis of value of DER to the grid and optimal DER scheduling

This paper presents part of the work ComEd and Quanta Technology have performed to quantify the locational and temporal value of DER to avoid distribution grid upgrade investments. It focuses on the formulation of a robust and efficient algorithm for DER optimal dispatch on a distribution feeder to mitigate the violation of current and voltage limits using the allocated cost of capacity and locational marginal value of real and reactive DER injection/withdrawal.     

Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

Bayesian estimation based on vague lifetime data

In Classical Bayesian approach, estimation of lifetime data usually is dealing with precise information. However, in real world, some informations about an underlying system might be imprecise and represented in the form of vague quantities. In these situations, we need to generalize classical methods to vague environment for studying and analyzing the systems of interest. In this paper, we propose the Bayesian estimation of failure rate and mean time to failure based on vague set theory in the case of complete and censored data sets. To employ the Bayesian approach, model parameters are assumed to be vague random variables with vague prior distributions. This approach will be used to induce the vague Bayes estimate of failure rate and mean time to failure by introducing and applying a theorem called “Resolution Identity” for vague sets. In order to evaluate the membership degrees of vague Bayesian estimate for these quantities, a computational procedure is investigated. In the proposed method, the original problem is transformed into a nonlinear programming problem which is then divided into eight subproblems to simplifying computations.     

Using plasmonic cloaking method on infinite cylindrical structures and its applications

Journal of Computational Electronics - In recent years, cloaking using materials with negative electric permittivity or magnetic permeability has been studied and researched. It has been...     

Using the genetic algorithm to enhance nonnegative matrix factorization initialization

Nonnegative matrix factorization (NMF) algorithms have been utilized in a wide range of real applications; however, the performance of NMF is highly dependent on three factors including: (1) choosing a problem dependent cost function; (2) using an effective initialization method to start the updating procedure from a near‐optimal point; and (3) determining the rank of factorized matrices prior to decomposition. Due to the nonconvex nature of the NMF cost function, finding an analytical‐based optimal solution is impossible. This paper is aimed at proposing an efficient initialization method to modify the NMF performance. To widely explore the search space for initializing the factorized matrices in NMF, the island genetic algorithm (IGA) is employed as a diverse multiagent search scheme. To adapt IGA for NMF initialization, we present a specific mutation operator. To assess how the proposed IGA initialization method efficiently enhances NMF performance, we have implemented state‐of‐the‐art initialization methods and applied to the Japanese Female Facial Expression dataset to recognize the facial expression states. Experimental results demonstrate the superiority of the proposed approach to the compared methods in terms of relative error and fast convergence.     

A Uniform Paradigm to Succinctly Encode Various Families of Trees

We propose a uniform method to encode various types of trees succinctly. These families include ordered (ordinal), k-ary (cardinal), and unordered (free) trees. We will show the approach is intrinsically suitable for obtaining entropy-based encodings of trees (such as the degree-distribution entropy). Previously-existing succinct encodings of trees use ad hoc techniques to encode each particular family of trees. Additionally, the succinct encodings obtained using the uniform approach improve upon the existing succinct encodings of each family of trees; in the case of ordered trees, it simplifies the encoding while supporting the full set of navigational operations. It also simplifies the implementation of many supported operations. The approach applied to k-ary trees yields a succinct encoding that supports both cardinal-type operations (e.g. determining the child label i) as well as the full set of ordinal-type operations (e.g. reporting the number of siblings to the left of a node). Previous work on succinct encodings of k-ary trees does not support both types of operations simultaneously (Benoit et al. in Algorithmica 43(4):275–292, 2005; Raman et al. in ACM-SIAM Symposium on Discrete Algorithms (SODA), pp. 233–242, 2002). For unordered trees, the approach achieves the first succinct encoding. The approach is based on two recursive decompositions of trees into subtrees. Recursive decomposition of a structure into substructures is a common technique in succinct encodings and has even been used to encode (ordered) trees (Geary et al. in ACM Trans. Algorithms 2(4):510–534, 2006; He et al. in ICALP, pp. 509–520, 2007) and dynamic binary trees (Munro et al. in ACM-SIAM Symposium on Discrete Algorithms (SODA), pp. 529–536, 2001; Storm in Representing dynamic binary trees succinctly, Master’s thesis, 2000). The main distinction of the approach in this paper is that a tree is decomposed into subtrees in a manner that the subtrees are maximally isolated from each other. This intermediate decomposition result is interesting in its own right and has proved useful in other applications (Farzan et al. in ICALP (1), pp. 451–462, 2009; Farzan and Munro in ICALP (1), pp. 439–450, 2009; Farzan and Kamali in ICALP, 2011).     

Surface modification of ultra‐high‐molecular‐weight polyethylene. II. Effect on the physicomechanical and tribological properties of ultra‐high‐molecular‐weight polyethylene/poly(ethylene terephthalate) composites

We performed surface modification of ultra‐high‐molecular‐weight polyethylene (UHMWPE) through chromic acid etching, with the aim of improving the performance of its composites with poly(ethylene terephthalate) (PET) fibers. In this article, we report on the morphology and physicomechanical and tribological properties of modified UHMWPE/PET composites. Composites containing chemically modified UHMWPE had higher impact properties than those based on unmodified UHMWPE because of improved interfacial bonding between the polymer matrix and the fibers and better dispersion of the fibers within the modified UHMWPE matrix. Chemical modification of UHMWPE before the introduction of PET fibers resulted in composites exhibiting improved wear resistance compared to the base material and compared to unmodified UHMWPE/PET composites. On the basis of the morphological studies of worn samples, microploughing and fatigue failure associated with microcracking were identified as the principle wear mechanisms. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Centroid index: Cluster level similarity measure

In clustering algorithm, one of the main challenges is to solve the global allocation of the clusters instead of just local tuning of the partition borders. Despite this, all external cluster validity indexes calculate only point-level differences of two partitions without any direct information about how similar their cluster-level structures are. In this paper, we introduce a cluster level index called centroid index. The measure is intuitive, simple to implement, fast to compute and applicable in case of model mismatch as well. To a certain extent, we expect it to generalize other clustering models beyond the centroid-based k-means as well.     

A bio-inspired gelatin-based pH- and thermal-sensitive magnetic hydrogel for in vitro chemo/hyperthermia treatment of breast cancer cells

Gelatin (Gel)-based pH- and thermal-responsive magnetic hydrogels (MH-1 and MH-2) were designed and developed as novel drug delivery systems (DDSs) for cancer chemo/hyperthermia therapy. For this goal, Gel was functionalized with methacrylic anhydride (GelMA), and then copolymerized with (2-dimethylaminoethyl) methacrylate (DMAEMA) monomer in the presence of methacrylate-end capped magnetic nanoparticles (MNPs) as well as triethylene glycol dimethacrylate (TEGDMA; as crosslinker). Afterward, a thiol-end capped poly(N-isopropylacrylamide) (PNIPAAm-SH) was synthesized through an atom transfer radical polymerization technique, and then attached onto the hydrogel through “thiol-ene” click grafting. The preliminary performances of developed MHs for chemo/hyperthermia therapy of human breast cancer was investigated through the loading of doxorubicin hydrochloride (Dox) as an anticancer agent followed by cytotoxicity measurement of drug-loaded DDSs using MTT assay by both chemo- and chemo/hyperthermia-therapies. Owing to porous morphologies of the fabricated magnetic hydrogels according to scanning electron microscopy images and strong physicochemical interactions (e.g., hydrogen bonding) the drug loading capacities of the MH-1 and MH-2 were obtained as 72 ± 1.4 and 77 ± 1.8, respectively. The DDSs exhibited acceptable pH- and thermal-triggered drug release behaviors. The MTT assay results revealed that the combination of hyperthermia therapy and chemotherapy has synergic effect on the anticancer activities of the developed DDSs.     

A review of interoperability assessment models

Interoperability is the ability of systems to provide services to and accept services from other systems, and to use the services exchanged so as to operate together in a more effective manner. The fact that interoperability can be improved means that the metrics for measuring interoperability can be defined. For the purpose of measuring the interoperability between systems, an interoperability assessment model is required. This paper deals with the existing interoperability assessment models. A compara- tive analysis among these models is provided to evaluate the similarities and differences in their philosophy and implementation. The analysis yields a set of recommendations for any party that is open to the idea of creating or improving an interoperability assessment model.