Dynamics and biogeochemical significance of the physical environment in Lake Biwa

We have examined two aspects of the dynamics and biogeochemical significance of the physical environment in Lake Biwa. One is the horizontal distribution of cyanobacteria as it relates to the ‘first gyre’ in the north basin of Lake Biwa. We could easily measure the first gyre using a vessel‐mounted acoustic doppler currents profiler. We were able to quantify the dynamics of the horizontal and vertical structure of currents and water temperature of this gyre. The first gyre did not remain at a fixed position; it moved north and south according to the growth of the gyre. This may play a role in the redistribution of cyanobacteria from place to place in the north basin. The second important environmental dynamic we measured was oxygen consumption rates from 1994 to 2000. We found that the minimum oxygen concentration in the hypolimnion has a clear inverse relationship with the apparent oxygen consumption rates in the 80–85 m depth layer. As a reduction in oxygen concentration in the hypolimnion can have a serious impact on benthic organisms, we concluded that the Lake Biwa environment should be monitored carefully and systematically.     

The concept of an endurance limit for adhesive joints

The effect of cyclic stressing on the strength of single lap adhesive joints has been studied and a considerable reduction in strength observed when the maximum stress exceeds about 40% of the ultimate tensile strength, but whether or not a true endurance limit exists is not proven. Fallacies are shown in some of the techniques which have been proposed for studying the fatigue behaviour of adhesive joints.     

Construction experiences with SSC collider dipole magnets atFermilab

Full length and short model SSC (Superconducting Super Collider) 50 mm bore dipoles are being built and tested at Fermilab. The mechanical design of these magnets has been determined from experience with the construction of previous superconducting magnets. Construction experience includes coil fabrication, ground insulation, instrumentation, collaring, and yoke assembly. Fabrication techniques are explained, and construction problems and their solutions are reviewed. The relationship of short to long model construction is discussed     

Compact optical millimetre-wave source using a dual-modesemiconductor laser

The authors demonstrate the optical generation of extremely narrow linewidth millimetre-wave signals between 40 and 60 GHz using a single-chip semiconductor laser. A dual-mode long-cavity multisection DFB semiconductor laser is driven at a subharmonic of the free-running-mode beat signal frequency to produce phase-locked millimetre waves with a 3 dB linewidth of less than 10 Hz and a 3 dB locking range of ~500 MHz     

Improvement of lysozyme recovery method from the precipitate of protein-anionic surfactant complexes

A new protein separation process using a surfactant and a polar organic solvent consists of a precipitation step and a recovery step. In the precipitation step, a protein-surfactant complex is precipitated from an aqueous solution, when an ionic surfactant, sodium di(2-ethylhexyl) sulfosuccinate (AOT), is added to an aqueous solution, including protein (lysozyme). In the recovery step, the precipitate is dissolved in a polar organic solvent, such as acetone, and the protein is recovered as precipitates when a very small amount of salt solution was added to remove surfactants from the protein-surfactant complex. However, the details of the protein recovery step from precipitate have not been studied yet. In this study, the improvement of the protein recovery step was examined from the viewpoint of a recovery ratio of protein and a remaining ratio of surfactant. The optimum NaCl concentration in the feed for the protein recovery was in the range of 0.05–0.2 kmol/m³. As the NaCl concentration in the feed increased to more than 0.2 kmol/m³, the precipitation ratio decreased due to the electrostatic screening effect of NaCl. It was found that the addition of a very small amount of NaCl solution to acetone was unnecessary when NaCl was included in the feed lysozyme solution. On the other hand, as the NaCl concentration decreased to less than 0.05 kmol/m³, the precipitation ratio was decreased due to the low re-precipitation of protein by the addition of a small amount of NaCl solution in acetone. In the case of the feed containing no salt, the desired NaCl concentration added to acetone was in the range above 0.2 kmol/m³. In addition, the most suitable volume ratio of acetone to feed was found to be 0.2.     

Biosynthetic Short Neuropeptides: A Rational Theory Based on Experimental Results for the Missing Pain-Relief Opioid Endomorphin Precursor Gene

Endomorphins are neuropeptides that bind strongly to μ-opioid receptors and are considered to play important roles in pain modulation and other biological functions. Two endomorphins have been identified, to date, endomorphine-1 and -2; both are tetrapeptides and differ by only a single amino acid in the third position. Both peptides were isolated from bovine brains; however, their precursor genes have not been identified. In this study, a nucleotide sequence corresponding to the endomorphin-1 peptide in an expressed sequence tag database has been found and a preproendomorphin-like precursor peptide from human brain complementary DNA (cDNA) has been cloned. The cDNA consists of nucleotide sequences of two already annotated predicted genes, and the putative peptide differs by one amino acid from the isolated endomorphin peptides. It is proposed herein that there is the possibility of unknown short proteins or peptide precursors being missed by automated gene prediction programs based on similarities of known protein sequences. A novel concept of how to produce endomorphins from a similar peptide is described. The oxidatively modified base might provide a clue for understanding discrepancies between nucleotide sequences on the genome and those on cDNAs.     

Efficient and precise cutting of zirconia ceramics using heated cutting tool

The thermally assisted machining of yttria-stabilized tetragonal zirconia polycrystal using a cutting tool heated with induction heating was proposed. Although the conventional thermally assisted machining cannot be applied to drilling, the proposed method can be. Heat transfer from the heated cutting tool to the workpiece was simulated analytically, and the result showed that heating of the tool up to 500 °C produced an increase of 150–400 °C in the workpiece temperature. Cutting experiments demonstrated an improvement in machinability.     

Identification of Neoantigens in Cancer Cells as Targets for Immunotherapy

The clinical benefits of immune checkpoint blockage (ICB) therapy have been widely reported. In patients with cancer, researchers have demonstrated the clinical potential of antitumor cytotoxic T cells that can be reinvigorated or enhanced by ICB. Compared to self-antigens, neoantigens derived from tumor somatic mutations are believed to be ideal immune targets in tumors. Candidate tumor neoantigens can be identified through immunogenomic or immunopeptidomic approaches. Identification of neoantigens has revealed several points of the clinical relevance. For instance, tumor mutation burden (TMB) may be an indicator of immunotherapy. In various cancers, mutation rates accompanying neoantigen loads may be indicative of immunotherapy. Furthermore, mismatch repair-deficient tumors can be eradicated by T cells in ICB treatment. Hence, immunotherapies using vaccines or adoptive T-cell transfer targeting neoantigens are potential innovative strategies. However, significant efforts are required to identify the optimal epitopes. In this review, we summarize the recent progress in the identification of neoantigens and discussed preclinical and clinical studies based on neoantigens. We also discuss the issues remaining to be addressed before clinical applications of these new therapeutic strategies can be materialized.