尼龙66高强力轻型帘布的开发与应用

神马尼龙66高强力轻型帘布在保持帘布高强力、尺寸稳定性、耐热性、耐疲劳、耐冲击的良好特性的前提下，采用SNT高强度工业丝生产技术，充分挖掘工业丝的强力优势，把富余的强力通过进一步降低纤维密度转化为帘布面积优势的扩大，从而提高轮胎生产的帘布出胎率，使轮胎生产厂享受尼龙66帘布品质的同时，实现降低成本的目的。     

分散剂FDN对G级油井水泥作用机理探讨

采用液相电导法和酸度法研究了分散剂FDN对G级油井水泥水化速度的影响。发现FDN促进水泥的早期水化,但吸附-络合作用及磺酸根离子对Ca(OH)_2核晶过程的“毒化”作用使后期水化速度减慢。本研究证实ζ电位升高是FDN广生分散作用的主要因素。当FDN的吸附达饱和时,ζ电位达最大值,水泥浆的分散程度最大。     

Effect of polymerization conditions on o‐phenylenediamine and o‐phenetidine oxidative copolymers

A series of new o‐phenylenediamine (OPD)/o‐phenetidine (PHT) copolymers with partly phenazine‐like structures has been successfully synthesized at three polymerization temperatures by chemically oxidative polymerization in four different polymerization media. The molecular structures and properties of the resulting OPD/PHT polymers were investigated by IR, UV–vis and high‐resolution ¹H NMR spectroscopies, and DSC, in order to ascertain the effect of reaction temperature, comonomer ratio and acid medium. The copolymerization mechanism of OPD with PHT monomers has been proposed. It is found that the statistical OPD/PHT copolymer obtained at a temperature of 118 °C has a higher degree of polymerization than that obtained at 12–17 °C. The OPD content in the copolymers calculated from NMR spectroscopic analysis is higher than that in the feed OPD content, whereas the OPD content calculated from element analysis is slightly lower than the feed OPD content. It can be predicted that denitrogenation takes place in the OPD units during the polymerization process at OPD/PHT molar ratios of 90/10 and 100/0. These OPD/PHT copolymers exhibit a much better solubility than the OPD homopolymer, hence suggesting an incorporation of PHT units into the phenazine structure of the homopolymer. The thermal behavior of the copolymers was also studied. Copyright © 2004 Society of Chemical Industry     

Comparison of prototype and rote instruction of English names for Chinese visual characters

This study compared prototype and rote instruction of English names for Chinese visual characters. In the prototype condition, participants were taught the meaning of the prototype that served as the distinctive feature of multicomponent characters. In the rote condition, participants traced the character and wrote its translation. Participants learned more rapidly and maintained more words in the prototype condition.     

宽带钢冷轧机颤振控制的数值模拟

本文以较为准确的轧机振动状态下的轧制压力模型为基础，对宽带钢冷轧机干摩擦阻尼减振进行了数值模拟的研究。研究结果与实际观测值相等。     

特种钢用结晶器铜管破裂原因分析

通过对某特钢厂破裂的结晶器铜管进行金相实验、扫描电镜和能谱分析,并结合结晶器的生产、使用及失效过程情况,综合受力分析,认为铜管破裂原因主要是环境介质硫渗入形成硫化物,在拉应力作用下,裂纹沿脆性质点扩展导致的破坏。     

金属及合金中钛的光度分析近况

综述了金属及合金中钛的光度测定方法新近进展情况。