Efficiency Enhancement of Single‐Walled Carbon Nanotube‐Silicon Heterojunction Solar Cells Using Microwave‐Exfoliated Few‐Layer Black Phosphorus

Carbon nanotube‐silicon (CNT‐Si)‐based heterojunction solar cells (HJSCs) are a promising photovoltaic (PV) system. Herein, few‐layer black phosphorus (FL‐BP) sheets are produced in N‐methyl‐2‐pyrrolidone (NMP) using microwave‐assisted liquid‐phase exfoliation and introduced into the CNTs‐Si‐based HJSCs for the first time. The NMP‐based FL‐BP sheets remain stable after mixing with aqueous CNT dispersion for device fabrication. Due to their unique 2D structure and p‐type dominated conduction, the FL‐BP/NMP incorporated CNT‐Si devices show an impressive improvement in the power conversion efficiency from 7.52% (control CNT‐Si cell) to 9.37%. Our density‐functional theory calculation reveals that lowest unoccupied molecular orbital (LUMO) of FL‐BP is higher in energy than that of single‐walled CNT. Therefore, we observed a reduction in the orbitals localized on FL‐BP upon highest occupied molecular orbital to LUMO transition, which corresponds to an improved charge transport. This study opens a new avenue in utilizing 2D phosphorene nanosheets for next‐generation PVs.     

Designing a secure designated server identity-based encryption with keyword search scheme: still unsolved

There exist only a few papers in the literature which target the problem of “proposing a secure designated server identity-based encryption with keyword search scheme.” In this paper, we prove that they all suffer from security issues, and therefore, this challenging problem still remains open.     

Degradation of PCBs in a marine sediment treated with ionizing and UV radiation

Radiolytic (electron beam) and photolytic (ultraviolet, UV) dechlorination of polychlorinated biphenyls (PCBs) in a marine sediment are described. Samples of a PCB-laden marine sediment, Standard Reference Material (SRM) 1944, NewYork/New Jersey Waterway Sediment, have been mixed with aqueous alcohol solutions and irradiated with an electron beam or photolyzed. Additives, such as alcohol, enhance the radiolytic yield and PCB dechlorination. In the electron beam irradiated samples, the concentrations of 29 PCB congeners decrease with irradiation dose. At the highest dose (500 kGy), the total concentration of PCBs is decreased by 83%. Photolysis leads to little dechlorination, but photolysis with added triethylamine leads to dechlorination (about 60%). It is likely that photolysis under optimal conditions (other additives, exposure time) may be as effective as electron beam radiolysis for the dechlorination of PCBs in sediment.     

Application of Organic Acid Based Artificial Neural Network Modeling for Assessment of Commercial Vinegar Authenticity

Food Analytical Methods - Vinegar as a nutraceutical substance is classified to various types related to the different substances applied in production process. Therefore, identity of the source...     

Seasonal Influence on Vapor-and Particle-Phase Polycyclic Aromatic Hydrocarbon Concentrations in School Communities Located in Southern California

Ambient concentrations of 15 vapor-and particle-phase (PM _2.5 ) polycyclic aromatic hydrocarbons (PAHs), listed by the US EPA as priority pollutants, were measured between July 2002 and November 2003 in six Southern California communities participating in a multi-year chronic respiratory health study of schoolchildren. The communities were geographically distributed over two hundred kilometers, extending from Long Beach in coastal Los Angeles, to high mountain areas to the north and west of the Los Angeles basin, and south into Eastern San Diego County. Seasonal and spatial variation in the atmospheric concentrations of PAHs is of interest because this class of compounds includes potent mutagens, carcinogens, and species capable of generating reactive oxygen species (ROS) that may lead to oxidative stress. Naphthalene accounted for 95% of the total PAH mass; annual averages ranged from 89 to 142 ng m ^{? 3} . Benzo[ghi]perylene (BGP) and the pro-carcinogen benzo[a]pyrene (BAP), present almost exclusively in the particle-phase, ranged respectively from 38 to 231 pg m ^?3 and 75 and 111 pg m ^{? 3} , with the highest values observed in Long Beach, a community with a high volume of seaport-related activities, and Lancaster, a commuter dormitory community. A considerable increase in the particle-phase PAH concentration, relative to the vapor-phase, was observed as ambient temperature decreased. Cold/hot season ratios for PAHs in PM _2.5 averaged 5.7, reaching 54 at Long Beach. The presented data underscore the importance of seasonal variations on atmospheric PAH concentrations. These observations are relevant to future interpretation and analysis of community-scale human health effects research.     

CuIns2/Cus Nanocomposite: Synthesis via Simple Microwave Approach and Investigation Its Behavior in Solar Cell

CuInS₂/CuS nanocomposite were synthesized by a copper complex, [bis(ethylenediamine)copper(ΙΙ)] sulfate. Eight sulfur sources were used for this experiment. The products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray analysis spectroscopy, and room temperature photoluminescence spectroscopy. Thin film of nanocomposite powder was fabricated and its feature (V_oc, J_sc and FF) was calculated by current–voltage (I–V) curve.     

Novel functionalized monomers based on kojic acid: snythesis,characterization, polymerization and evalution of antimicrobial activity

Two novel acrylate monomers, [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl acrylate and {1-[(5-(benzyloxy)-4-oxo-4H-pyran-2-yl)methyl]-1,2,3-triazol-4-yl}methyl acrylate were synthesized by the reaction of 5-benzyloxy-2-(hydroxymethyl)-4H-pyran-4-one and 5-(benzyloxy)-2-{[4-(hydroxymethyl)-1,2,3-triazol-1-yl]methyl}-4H-pyran-4-one with acryloyl chloride in the presence of triethylamine, respectively. These monomers were polymerized using 2,2^′-azobisisobutyronitrile (AIBN) as the initiator in N,N-dimethylformamide:14-dioxane (10:1) solution. The thermal behavior of the polymers was investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The synthesized compounds were evaluated for their antibacterial and antifungal activites aganist bacteria and fungi using the disk diffusion method. The results indicated that some of these compounds demonstrated moderate to good antibacterial and antifungal activities.     

Classification of Hydrogels Based on Their Source: A Review and Application in Stem Cell Regulation

Stem cells are recognized by their self-renewal ability and can give rise to specialized progeny. Hydrogels are an established class of biomaterials with the ability to control stem cell fate via mechanotransduction. They can mimic various physiological conditions to influence the fate of stem cells and are an ideal platform to support stem cell regulation. This review article provides a summary of recent advances in the application of different classes of hydrogels based on their source (e.g., natural, synthetic, or hybrid). This classification is important because the chemistry of substrate affects stem cell differentiation and proliferation. Natural and synthetic hydrogels have been widely used in stem cell regulation. Nevertheless, they have limitations that necessitate a new class of material. Hybrid hydrogels obtained by manipulation of the natural and synthetic ones can potentially overcome these limitations and shape the future of research in application of hydrogels in stem cell regulation.     

Synthesis, Characterization, and Optimization of Co2SnO4 Nanoparticles via Co-precipitation Method

Nano-structured pure Co₂SnO₄ powders have been synthesized using the co-precipitation method in the presence of oleic acid (OA) as a capping agent. The Taguchi L₄ statistical design was used to investigate the effect of the main parameters (i.e., OA concentration, calcination time, and calcination temperature) on Co₂SnO₄ formation, crystallite size, and morphology. Co₂SnO₄ particles were characterized by powder x-ray diffraction (XRD), energy-dispersive x-ray spectroscopy, scanning electron microscopy (SEM), Fourier transform of infrared spectroscopy (FT-IR), dynamic light scattering (DLS), and Brunauer-Emmett-Teller (BET) surface area measurements. The formation of small and well-crystalline particles, on the order of 41.12-90.60 nm in crystal size, has been determined from XRD patterns and confirmed by SEM and DLS. The specific surface area was measured by a BET method to be 25.43 m²/g. The particle size of the product was observed by DLS to be in the range of 40-105 nm. The results indicated that calcination temperature has the most significant effect on the produced cobalt stannate crystal size.