High-performance single-mode VCSELs in the 1310-nm waveband

High-performance vertical-cavity surface-emitting lasers (VCSELs) emitting in the 1310-nm waveband are fabricated by bonding AlGaAs-GaAs distributed Bragg reflectors on both sides of a InP-based cavity. A 2-in wafer bonding process is optimized to produce very good on-wafer device parameter uniformity. Carrier injection is implemented via double intracavity contact layers and a tunnel junction. A 1.2-mW single-mode output power is obtained in the temperature range of 20/spl deg/C-80/spl deg/C. Modulation capability at 3.2 Gb/s is demonstrated up to 70/spl deg/C. Overall VCSEL performance complies with the requirements of the 10 GBASE-LX4 IEEE.802.3ae standard, which opens the way for novel applications of VCSELs emitting in the 1310-nm band.     

The relative effects of transection of the gustatory branches of the seventh and ninth cranial nerves on NaCl taste detection in rats.

Chorda tympani nerve (CT) transection in rats severely impairs NaCl taste detection. These rats can detect higher concentrations of NaCl, however, suggesting that remaining oral nerves maintain some salt sensibility. Rats were tested in a gustometer with a 2-response operant taste-detection task before and after sham surgery (n = 5), combined transection of the CT and the greater superficial petrosal nerves (GSP; 7x, n = 6), or transection of the glossopharyngeal nerve (GL; 9x, n = 4). Thresholds did not significantly change after sham surgery. Although the GL responds to NaCl and innervates nearly 60% of total taste buds, 9x surgery had no effect. However, 7x surgery increased NaCl detection threshold by ～2.5 log?? units, greater than that reported for CT transection alone. These results suggest that the GSP contributes to NaCl sensitivity in rats and also demonstrate that the GL and perhaps the superior laryngeal and lingual nerve proper can maintain some NaCl detectability at high concentrations. These findings confirm the primacy of the 7th nerve relative to the 9th nerve in sensibility of NaCl in the rat model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Anti-BlUFf: towards counterfeit mitigation in IC supply chains using blockchain and PUF

International Journal of Information Security - The complexity of today’s integrated circuit (IC) supply chain, organised in several tiers and including many companies located in different...     

Installation d’essais pour la modélisation à échelle réduite des impulsions électromagnétiques

This paper presents a test platform for the scale modeling of electromagnetic pulse effects. The different elements of the installation, i.e. a vertical conical antenna placed on a metallic reference plane, a fast rise time supply generator and a data acquisition and processing facility are described. The field of the antenna has also been studied using a Numerical Electromagnetic Code (Nec)based on the moments method and a comparison with the measurements has been performed. Conclusions resulting from this first stage in the construction of the scale modeling installation are presented.     

Probabilistic Model for Polycrystalline Microstructures with Application to Intergranular Fracture

A two part probabilistic model for polycrystalline microstructures is described. The model utilizes a Poisson–Voronoi tessellation for the grain geometry and a vector random field model for the crystallographic orientation. The grain geometry model is calibrated to experimental data through the intensity of the Poisson point field underlying the Poisson–Voronoi tessellation and the orientation random field is calibrated to experimental data through its marginal distributions and second moment properties. Realizations of the random microstructure are generated by use of translation methods and are used, with simplified mechanical models, to investigate the problem of intergranular fracture. It is found that intergranular cracks exhibit some statistical properties of a scaled Brownian motion process.     

Non-Gaussian Model for Ringing Phenomena in Offshore Structures

Significant interest has been shown in identifying the nonlinear mechanisms that induce a ringing type response in offshore structural systems. This high frequency transient type response has been observed in offshore systems, particularly in tension leg platforms (TLPs). Given the implications of this behavior on the fatigue life of TLP tendons, it is essential that ringing be considered in the overall response evaluation. This study presents two non-Gaussian probabilistic models of nonlinear viscous hydrodynamic wave forces that induce ringing. The response of a single-degree-of-freedom system exposed to these non-Gaussian wave force models is then evaluated using analytical and numerical studies based on the It? differentiation rule and the Monte Carlo simulation procedure, respectively. The results demonstrate that the proposed models induce ringing type response in a simplified structure. This study provides a probabilistic framework for modeling ringing type phenomenon which will serve as a building block for more refined hydrodynamic load models.     

Rhombellation: a builder for multi-shell clusters

Rhombellanes are mathematical structures, proposed by us in 2017; they may appear both in periodic crystals or in finite structures. The simplest rhombellane is rbl.5 or K_2.3, the complete bipartite graph. In this paper, rhombellation operation is iteratively applied on three classes of structures: cube, tori and cubic pcu-network, respectively. The structural topological parameters are detailed.     

Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.     

Rheological Properties of Honey from Burkina Faso: Loss Modulus and Complex Viscosity Modeling

This study evaluated the rheological behavior of Burkina Faso honey and the use of exponential and polynomial models to predict the influence of chemical composition and temperature on the viscoelastic parameters: complex viscosity (η*) and loss modulus (G’’). Samples were first characterized by evaluating: water activity, 5-hydroxy methyl furfural, sugars (fructose, glucose, and sucrose), electrical conductivity, moisture, and color. Dynamic rheological properties were obtained at different temperatures (5, 10, 15, 20, 25, 30, and 40°C). All the honeys displayed Newtonian behavior. Complex viscosity and loss modulus can be predicted based on the chemical composition and temperature using polynomial models (R² > 98.00%).