Gelling of alginate fibres

Equipment was developed to measure the time for complete gelling of sodium alginate fibres in calcium chloride solution, taken as the time to achieve maximum tensile strength. The effects of fibre diameter, alginate concentration, alginate composition and calcium chloride concentration on gelling time were investigated. A diffusional model, developed to predict the gelling time, agreed with experimental results except for the effect of calcium ion concentration which was modelled empirically.     

A new method of excitation control based on fuzzy set theory

The synthesis of the structure of the power system stabiliser (PSS) and its parametrization are based entirely on methods of linear system theory. Thus the desired effect of the PSS is limited to a bounded area around one system operating point. The use of a controller based on fuzzy set theory introduces an event controlled excitation of the synchronous machine taking into account the power system operation. The desired response of the fuzzy controller is given by a set of rules which are obtained from the limits of the voltage regulator and the undesired performance of the conventional excitation control. A fuzzy controller has been developed for which simulation results are provided. These results support the concept of a fuzzy controller for the purpose of excitation control. They show that a well designed fuzzy controller is superior to a fast excitation control with an additional PSS     

New nanocomposite materials based on polymerization of [oligo(oxyethylene) methacrylates] in the presence of montmorillonite clay

Intercalation of poly[oligo(oxyethylene) methacrylates] onto sodium montmorillonite (MMT) clay has been investigated. A polymer–clay hybrid has been synthesized through intercalation of the monomer followed by its solution free‐radical polymerization. Eight polymer–clay hybrids were prepared using different weight ratios of clay, different oligo(oxyethylene) lengths and different proportions of crosslinker. Evidence of the development of nanostructures is obtained from scanning electron microscopy, and wide‐angle X‐ray diffraction studies support these results which show disappearance of the peak characteristic to d₀₀₁ spacing. In this hybrid MMT is dispersed homogeneously in the polymer matrix. © 2003 Society of Chemical Industry     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

A General Reliable Quadratic Form: An Extension of Affine Arithmetic

In this article, a new extension of affine arithmetic is introduced. This technique is based on a quadratic form named general quadratic form. We focus here on the computation of reliable bounds of a function over a hypercube by using this new tool. Some properties of first quadratic functions and then polynomial ones are reported. In order to show the efficiency of such a method, ten polynomial global optimization problems are presented and solved by using an interval branch-and-bound based algorithm. The work of the first author was also supported by the Laboratoire de Mathématiques Appliquées CNRS–FRE 2570, Université de Pau et des Pays de l'Adour, France, and by the Laboratoire d'Electrotechnique et d'Electronique Industrielle CNRS–UMR5828, Group EM³, INPT–ENSEEIHT.     

Preparation and Characterization of Inorganic Organic Hybrid Material Based on TEOS/MAPTMS for Biomedical Applications

Silicon - In this study, inorganic-organic hybrid material consisting of tetraethyl orthosilicate (TEOS) and 3-methacryloxypropyl trimethoxysilane (MAPTMS) were prepared with sol-gel process and...     

Barium aluminate hydrates. IV. α-BaO.Al2O3.4H2O

α-BaO.Al₂O₃.4H₂O has been synthesised and studied by infrared, X-ray and thermal analytical techniques. The compound of approximate formula BaO.Al₂O₃.0.5H₂O, described in Part III, forms as a dehydration product, and appears to be identical with the compound β-BAH₂ described by other workers. A possible explanation for the discrepancy in water content is discussed.     

Amplitudes distribution over two copies of small quantum subsystems

We propose a new formulation of quantum algorithm which allows to distribute amplitudes over two copies of small quantum subsystems. The new method gives a fixed number of copies and applied to the control of multi-qubit system. The analysis for the amount of error due to the distribution process has been presented for a system of 10 qubits with a small quantum subsystems to be copied. The present scheme provides a new way to distribute amplitudes over small quantum subsystems.