Power sector development in India with CO2 emission targets: Effects of regional grid integration and the role of clean technologies

The power sector in India at present comprises of five separate regional electricity grids having practically no integrated operation in between them. This study analyses the utility planning, environmental and economical effects of integrated power sector development at the national level in which the regional electric grids are developed and operated as one integrated system. It also examines the effects of selected CO₂ emission reduction targets in the power sector and the role of renewable power generation technologies in India. The study shows that the integrated development and operation of the power system at the national level would reduce the total cost including fuel cost by 4912 million $, total capacity addition by 2784 MW, while the emission of CO₂, SO₂ and NO_x would be reduced by 231.6 (1.9%), 0.8 (0.9%), 0.4 (1.2%) million tons, respectively, during the planning horizon. Furthermore, the study shows that the expected unserved energy, one of the indices of generation system reliability, would decrease to 26 GWh under integrated national power system from 5158 GWh. As different levels of CO₂ emission reduction targets were imposed, there is a switching of generation from conventional coal plants to gas fired plants, clean coal technologies and nuclear based plants. As a result the capacity expansion cost has increased. It was found that wind power plant is most attractive and economical in the Indian perspective among the renewable options considered (Solar, wind and biomass). Copyright © 2003 John Wiley & Sons, Ltd.     

A Petri Net based approach to determine the disassembly strategy of a product

In order to protect the environment and regain value added to products, a process known as disassembly has come into the limelight. This process is to be applied to reuse abandoned goods and materials. Manufacturers are being forced to establish disassembly plants and to develop their products' designs so as to maintain the government's dictate to dispose off their products in an environmentally responsible manner. This research presents a cost-based heuristic analysis for a circuit board assembly. Various components of the product and their assembly relationships are represented by a Petri Net diagram. Firing the transitions of the disassembly Petri Net is integrated with cost-based indices to develop an effective disassembly strategy. The methodology discussed here simplifies the decisionmaking process involved in disassembly planning. A comprehensive disassembly process planning system is proposed here and is exemplified by a case study of circuit board assembly.     

Adiponectin Deficiency Alters Placenta Function but Does Not Affect Fetal Growth in Mice

Adiponectin administration to pregnant mice decreases nutrient transport and fetal growth. An adiponectin deficiency, on the other hand, as seen in obese women during pregnancy, alters fetal growth; however, the mechanism is unclear. To determine the role of adiponectin on placenta function and fetal growth, we used adiponectin knockout, adiponectin heterozygote that displays reduced adiponectin levels, and wild-type mice on a control diet or high fat/high sucrose (HF/HS) diet. Triglycerides (TGs) in the serum, liver, and placenta were measured using colorimetric assays. Gene expression was measured using quantitative RT-PCR. Adiponectin levels did not affect fetal weight, but it reduced adiponectin levels, increased fetal serum and placenta TG content. Wildtype dams on a HF/HS diet protected the fetuses from fatty acid overload as judged by increased liver TGs in dams and normal serum and liver TG levels in fetuses, while low adiponectin was associated with increased fetal liver TGs. Low maternal adiponectin increased the expression of genes involved in fatty acid transport; Lpl and Cd36 in the placenta. Adiponectin deficiency does not affect fetal growth but induces placental dysfunction and increases fetal TG load, which is enhanced with obesity. This could lead to imprinting effects on the fetus and the development of metabolic dysfunction in the offspring.     

Joint spectrum sensing and resource allocation optimization using genetic algorithm for frequency hopping–based cognitive radio networks

In cognitive radio (CR) networks, secondary users should effectively use unused licensed spectrums, unless they cause any harmful interference to the primary users. Therefore, spectrum sensing and channel resource allocation are the 2 main functionalities of CR networks, which play important roles in the performance of a CR system. To maximize the CR system utility, we propose a joint out‐of‐band spectrum sensing and operating channel allocation scheme based on genetic algorithm for frequency hopping–based CR networks. In this paper, to effectively sense the primary signal on hopping channels at each hopping slot time, a set of member nodes sense the next hopping channel, which is called out‐of‐band sensing. To achieve collision‐free cooperative sensing reporting, the next channel detection notification mechanism is presented. Using genetic algorithm, the optimum sensing and data transmission schedules are derived. It selects a sensing node set that participate the spectrum sensing for the next expected hopping channel during the current channel hopping time and another set of nodes that take opportunity for transmitting data on the current hopping channel. The optimum channel allocation is performed in accordance with each node's individual traffic demand. Simulation results show that the proposed scheme can achieve reliable spectrum sensing and efficient channel allocation.     

Assurance of energy efficiency and data security for ECG transmission in BASNs

With the technological advancement in body area sensor networks (BASNs), low cost high quality electrocardiographic (ECG) diagnosis systems have become important equipment for healthcare service providers. However, energy consumption and data security with ECG systems in BASNs are still two major challenges to tackle. In this study, we investigate the properties of compressed ECG data for energy saving as an effort to devise a selective encryption mechanism and a two-rate unequal error protection (UEP) scheme. The proposed selective encryption mechanism provides a simple and yet effective security solution for an ECG sensor-based communication platform, where only one percent of data is encrypted without compromising ECG data security. This part of the encrypted data is essential to ECG data quality due to its unequally important contribution to distortion reduction. The two-rate UEP scheme achieves a significant additional energy saving due to its unequal investment of communication energy to the outcomes of the selective encryption, and thus, it maintains a high ECG data transmission quality. Our results show the improvements in communication energy saving of about 40%, and demonstrate a higher transmission quality and security measured in terms of wavelet-based weighted percent root-mean-squared difference.     

Comparative studies on electronic transport due to the reduced dimensionality at the heterojunctions of GaAs/A1xGa(1−x)As and GaxIn(1−x)As/InP systems at low temperatures

Comparative studies on ac/dc mobility due to the reduced dimensionality of spatially confined low dimensional systems, at the heterojunctions of GaAs/A1_xGa_(1−x)As and Ga_xIn_(1−x)As/InP forming quasi-two dimensional (Q2D) and quasi-one dimensional (Q1D) systems have been made. The effect of various low temperature nonphonon scattering mechanisms such as ionized impurity, alloy disorder scattering and surface roughness scattering mechanisms; and phonon scattering mechanisms such as acoustic phonon via deformation potential and piezoelectric scattering mechanisms on the systems has been studied. It is found that the surface roughness scattering mechanism dominates in Q2D system whereas acoustic phonon scattering mechanism dominates in Q1D system due to which the nature and magnitude of the temperature dependent dc/ac mobility curves shows significant variation. Whereas, it is observed that the confinement does not change the nature of the frequency dependent real and imaginary parts of ac mobility curves. However, the mobility is found to be enhanced with effective mass and also due to the confinement, i.e. the mobility for Q1D system is higher than that for Q2D system.     

Resonant Tunneling through Monolayer Si Colloidal Quantum Dots and Ge Nanocrystals

Resonant tunneling through a 4 nm nanocrystal Ge (nc‐Ge) layer and a 2.4 nm monolayer of Si colloidal quantum dots (QD) is achieved with 0.7 nm amorphous Al₂O₃ (a‐Al₂O₃) barriers. The nc‐Ge resonant tunneling diode (RTD) demonstrates a peak‐to‐valley current ratio (PVCR) of 8 and a full width at half maximum (FWHM) of 30 mV at 300 K, the best performance among RTDs based on annealed nanocrystals. The Si QD RTD is first achieved with PVCRs up to 47 and FWHMs as small as 10 mV at room temperature, confirming theoretically expected excellences of 3D carrier confinements. The high performances are partially due to the smooth profile of nc‐Ge layer and the uniform distribution of Si QDs, which reduce the adverse influences of many‐body effects. More importantly, carrier decoherence is avoided in the 0.7 nm a‐Al₂O₃ barriers thinner than the phase coherence length (≈1.5 nm). Ultrathin a‐Al₂O₃ also passivates well materials and suppresses leakage currents. Additionally, the interfacial bandgap of ultrathin a‐Al₂O₃ is found to be similar to the bulk, forming deep potential wells to sharpen transmission curves. This work can be easily extended to other materials, which may enable resonant tunneling in various nanosystems for diverse purposes.     

RAT selection for a low battery mobile device for future 5G networks

The growth of wireless communication toward fifth generation will lead to the existence of number of access technologies to provide seamless connectivity and form heterogeneous network environment. Earlier, there was single access technology to run applications, but 5G will have heterogeneous network environment and provide separate network for each application. As compared with 4G, 5G will provide increase in data rate, decrease in delay, increase in quality of service, and so on because of its various enabling technologies. Therefore, for each application, selection of best access network via its enabling technology is an important task. This selection is done either at user terminal side or at network operator side by combining preferences for network attributes and network parameters. In this paper, to enjoy 5G, selection is done in a heterogeneous networks environment for enabling technologies like device‐to‐device communication, spectrum sharing, enhancing quality of experience, energy efficiency, and so on. This selection is done via optimization techniques for a fixed duration video clip that is to be transmitted from a device running low in battery. The selection environment composed of UMTS, WLAN1, and WLAN2 as available networks. The simulation results show that the network selected for each enabling technology supports various features of 5G. Also, error analysis of selection results is done using confidence interval estimate at 90%, 92%, and 95% confidence level. From results obtained, it is seen that different optimization techniques used to access network for different enabling technologies (providing 5G features) prove to be useful for future 5G network.     

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

Dopant‐free hole transport materials (HTMs) are essential for commercialization of perovskite solar cells (PSCs). However, power conversion efficiencies (PCEs) of the state‐of‐the‐art PSCs with small molecule dopant‐free HTMs are below 20%. Herein, a simple dithieno[3,2‐b:2′,3′‐d]pyrrol‐cored small molecule, DTP‐C6Th, is reported as a promising dopant‐free HTM. Compared with commonly used spiro‐OMeTAD, DTP‐C6Th exhibits a similar energy level, a better hole mobility of 4.18 × 10^?4 cm² V^?1 s^?1, and more efficient hole extraction, enabling efficient and stable PSCs with a dopant‐free HTM. With the addition of an ultrathin poly(methyl methacrylate) passivation layer and properly tuning the composition of the perovskite absorber layer, a champion PCE of 21.04% is achieved, which is the highest value for small molecule dopant‐free HTM based PSCs to date. Additionally, PSCs using the DTP‐C6Th HTM exhibit significantly improved long‐term stability compared with the conventional cells with the metal additive doped spiro‐OMeTAD HTM. Therefore, this work provides a new candidate and effective device engineering strategy for achieving high PCEs with dopant‐free HTMs.     

Highly Efficient Rapid Annealing of Thin Polar Polymer Film Ferroelectric Devices at Sub‐Glass Transition Temperature

An unexpected rapid anneal of electrically active defects in an ultrathin (15.5 nm) polar polyimide film at and below glass transition temperature (T_g) is reported. The polar polymer is the gate dielectric of a thin‐film‐transistor. Gate leakage current density (J_g) through the polymer initially increases with temperature, as expected, but decreases rapidly at T_g ? 60 °C. After ≈2 min at T_g, the leakage is reduced by nearly three orders of magnitude. A concomitant observation is that the drain current (I_d)–gate voltage (V_g) hysteresis decreases with temperature, reaching zero at nearly the same temperature at which J_g collapses. As J_g drops further, the drain current hysteresis increases again but in the opposite direction. This combination strongly supports the interpretation of rapid defect annealing.