Challenges in Liquid‐Phase Exfoliation,Processing, and Assembly of Pristine Graphene

Recent developments in the exfoliation, dispersion, and processing of pristine graphene (i.e., non‐oxidized graphene) are described. General metrics are outlined that can be used to assess the quality and processability of various “graphene” products, as well as metrics that determine the potential for industrial scale‐up. The pristine graphene production process is categorized from a chemical engineering point of view with three key steps: i) pretreatment, ii) exfoliation, and iii) separation. How pristine graphene colloidal stability is distinct from the exfoliation step and is dependent upon graphene interactions with solvents and dispersants are extensively reviewed. Finally, the challenges and opportunities of using pristine graphene as nanofillers in polymer composites, as well as as building blocks for macrostructure assemblies are summarized in the context of large‐scale production.     

Ultralow Voltage Nanoelectronics Powered Directly, and Solely, From a Tree

Complex patterns of electrical potential differences exist across the structure of a tree. We have characterized these voltages, and measured values ranging from a few millivolts to a few hundred millivolts for Bigleaf maple trees. These potential differences provide a unique opportunity to power nanoelectronic circuits directly from a tree. We have designed, constructed, and successfully tested two ICs, powered solely through a connection to Bigleaf maple trees. The first circuit, built in a 130-nm technology, creates a stable 1.1 V supply from input voltages as low as 20 mV, and can be deployed to generate a usable voltage level for standard circuits. The second circuit, fabricated in 90-nm technology is a timer, operating at 0.045 Hz and can be used for time keeping in stand-alone sensor network nodes. The boost circuit and timer consume 10 and 2.5 nW of power during operation, respectively.      

Oxidative stability of olive oil during the thermal process: Effect of Pistacia khinjuk fruit oil

The oxidative stability of refined olive oil with incorporated Pistacia khinjuk fruit oil (PKFO; 0.5%, 1%, 2%, 5%, and 10%) during thermal processing at 170ºC for 8 h was evaluated. The conjugated diene values, carbonyl values, acid values, oil/oxidative stability indices, and total tocopherol content were measured during thermal processing. Olive oil containing 0.5% PKFO was identified as the most oxidative stable oil followed by oils containing 100 ppm TBHQ and 1, 5, 10, and 2% PKFO. No significant difference between samples of olive oil containing 100 ppm TBHQ and 1% PKFO was observed. Thus, it was concluded that PKFO at levels lower than 1% could provide stronger antioxidation activity in comparison with TBHQ (the strongest syntactic antioxidant used in the food industry). Moreover, reduction in tocopherol compounds during thermal processing was higher in olive oil containing TBHQ as compared to those in pure olive oil.     

Simultaneous Spectrophotometric Determination of 2-Thiouracil and 2-Mercaptobenzimidazole in Animal Tissue Using Multivariate Calibration Methods: Concerns and Rapid Methods for Detection

ABSTRACT: Two multivariate calibration methods, partial least squares (PLS) and principal component regression (PCR), were applied to the spectrophotometric simultaneous determination of 2-mercaptobenzimidazole (MB) and 2-thiouracil (TU). A genetic algorithm (GA) using partial least squares was successfully utilized as a variable selection method. The concentration model was based on the absorption spectra in the range of 200 to 350 nm for 25 different mixtures of MB and TU. The calibration curve was linear across the concentration range of 1 to 10 μg mL⁻¹ and 1.5 to 15 μg mL⁻¹ for MB and TU, respectively. The values of the root mean squares error of prediction (RMSEP) were 0.3984, 0.1066, and 0.0713 for MB and 0.2010, 0.1667, and 0.1115 for TU, which were obtained using PCR, PLS, and GA-PLS, respectively. Finally, the practical applicability of the GA-PLS method was effectively evaluated by the concurrent detection of both analytes in animal tissues. It should also be mentioned that the proposed method is a simple and rapid way that requires no preliminary separation steps and can be used easily for the analysis of these compounds, especially in quality control laboratories.     

Antimicrobial Property,Antioxidant Capacity,and Cytotoxicity of Essential Oil from Cumin Produced in Iran

ABSTRACT: Cumin (Cuminum cyminum) is one of the commonly used spices in food preparations. It is also used in traditional medicine as a stimulant, a carminative, and an astringent. In this study, we characterized the antimicrobial, antioxidant, and cytotoxic activities of cumin. E. coli, S. aureus, and S. faecalis were sensitive to various oil dilutions. The total phenol content of the essential oil was estimated to be 33.43 μg GAE/mg of the oil. The oil showed higher antioxidant activity compared with that of BHT and BHA. The cumin essential oil exhibited a dose-dependent scavenging of DPPH radicals and 5.4 μg of the oil was sufficient to scavenge 50% of DPPH radicals/mL. At a concentration of 0.1 μL/mL, oil destructed Hela cells by 79%. The antioxidant activity of cumin essential oil might contribute to its cytotoxic activity. Acute and subchronic toxicity was studied in a 30-d oral toxicity study by administration to Wistar rats of the essential oil. A 17.38% decrease in WBCs count, and 25.77%, 14.24%, and 108.81% increase in hemoglobin concentration, hematocrit, and platelet count, respectively, were noted. LDL/HDL ratio was reduced to half, which adds to the nutritional effects of cumin. Thus, cumin with a high phenolic content and good antioxidant activity can be supplemented for both nutritional purposes and preservation of foods.     

Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.     

Comparative study on the effect of various pretreatment methods on the enrichment of hydrogen producing bacteria in anaerobic granulated sludge from brewery wastewater

Five pretreatment methods, namely chemical, acid, heat-shock, freezing and thawing, and base, were evaluated for the enrichment of hydrogen-producing bacteria in anaerobic granulated sludge, which will be subsequently used as seed in biological hydrogen production. All the pretreatments showed positive effects towards improving hydrogen (H₂) generation by the microbial population with higher hydrogen production yield and COD removal efficiency as compared to control. The granulated sludge pretreated by heat-shock showed maximum accumulated H₂ (19.48mLg^?1-COD), COD removal efficiency (62%), and biomass concentration (22.5 gL^?1).     

Specimen preparation and image processing and analysis techniques for automated quantification of concrete microcracks and voids

Specimen preparation and image processing/analysis techniques were developed for use in automated quantitative microstructural investigation of concrete, focusing on concrete microcracks and voids. Different specimen preparation techniques were developed for use in fluorescent and scanning electron microscopy (SEM) of concrete; then techniques produce a sharp contrast between microcracks/voids and the body of concrete. The image processing/analysis techniques developed specifically for use with concrete address the following usages: automatic threshold; development of intersecting microcracks/voids and connected voids; distinction of microcracks form voids based on geometric attributes; and noise filtration.