Influence of the method and degree of milling on the rate of milling and leaching of industrial alumina

Conclusions An investigation was made of the influence of the method and degree of milling on the time required to obtain a given mean particle size, and on the leaching of refired industrial alumina.It was found that much more time is required for milling of alumina in a ball mill than in a vibrational mill, the more so, the higher the temperature of the preliminary firing of the alumina. At the same time, the mean surface diameter of the powder increases, together with the content of grains of radius greater than 5, while the content of grains of radius less than 2, which is important to ensure good properties of the fired ceramic, decreases.During milling in a ball mill, the amount of ground iron is increased considerably compared with the amount during vibrational milling to the same particle size of the alumina.Leaching of alumina after milling in a ball mill is less satisfactory than after milling in a vibrational mill. As a result, the Al₂O₃ content in the washed material is decreased and the amount of Na₂O, Fe₂O₃, and other impurities is increased.Translated from Ogneupory, No. 1, pp. 43–50, January, 1969.     

An efficient fragile watermarking scheme with multilevel tamper detection and recovery based on dynamic domain selection

Self-recoverable fragile watermarking is meant for accurate tamper localization as well as image recovery with superior visual quality. However, most of the existing state of art approaches perform authentication and recovery on block basis owing to which the entire block is categorized as tampered in case of alteration of one or more pixels of it. This, results in staircase formation of tamper detected regions, hence lacking in accuracy. Furthermore, the visual quality of the recovered image also deteriorates as an approximate value is assigned to all the block pixels corresponding to the altered region. The proposed watermarking scheme performs both authentication and recovery pixelwise. The authentication of each pixel is done via multi level tamper detection(MLTD) through three authentication bits based on value, location and neighbourhood information. The domain for image recovery is chosen dynamically based on the content of the block, may it be in spatial domain for smooth blocks or frequency domain for the rough ones. This provides high accuracy in recovery. As the embedding of recovery information is done in the frequency domain, the imperceptibility of the watermarked image scheme remains high. Also, embedding of authentication information in the spatial domain maintains its fragile nature. Even for higher tampering ratios, the lost content is rebuilt with high peak signal to noise ratio(PSNR) of the recovered image. The probabilities of false rejection and false acceptance head towards the ideal value for most of the empirical analysis. Comparative study via metric evaluation of probability of false rejection (PFR), probability of false acceptance (PFA) and PSNR of recovered image for different standard test cover images demonstrate the efficacy of the proposed scheme over other existing state of art approaches. Further, the security of the proposed scheme remains high due to usage of multi-layered secret keys and chaos based random mapping handling worst tamper scenarios.     

Surveillance of Drinking Water Quality for Safe Water Supply—A Case Study from Shillong,India

To ascertain the quality of drinking water being supplied and maintained, it is necessary to conduct water quality surveillance for evolving suitable strategy for future planning. In the present investigation, water quality was monitored in treatment plants, service reservoirs, and at consumer ends in three seasons to assess the baseline water quality status at Shillong in Meghalaya. There are three water treatment plants at Shillong namely Umkhen, Mawlai and GSWS with design capacities of 1.5, 3.4 and 34 Million liter per day (MLD) respectively. Each treatment plant is having rapid sand filtration followed by disinfection. The study reveals that the physico-chemical parameters of water quality at consumer end meets Indian drinking water quality standards (BIS 1991) after conventional treatment followed by disinfection, whereas the bacteriological parameters for raw water sources exceed the permissible limit indicating the treatment need for drinking purposes. Throughout year the average feacal coliform contamination at service reservoir and to consumer end were found as 44 to 156 CFU/100 ml which may be attributed to the general management practices for maintenance of service reservoirs and the possibility of en route contamination.     

A comparative study on the metaheuristic-based optimization of skew composite laminates

Engineering with Computers - Plate structures are the integral parts of any maritime engineering platform. With the recent focus on composite structures, the need for optimizing their design and...     

Design and Uncertainty Evaluation of a Strain Measurement System

Strain measurement is very important in various industrial applications as well as different disciplines of science and technology for direct and indirect observations of certain parameters. Designing signal conditioning circuit is always a challenging and important task for satisfactory and reliable performance of a sensor as well as the system. The design and implementation details of a signal conditioning circuit of resistive sensor (strain gauge) for strain measurement are presented in this paper. Also the important aspects in designing a signal conditioning circuit for resistive sensor are presented and a novel method for the measurement of strain is discussed. Quarter bridge configuration with AC voltage excitation is used for the measurement along with the necessary circuitry to get a suitable and measurable output DC voltage. The measurement system is calibrated using a cantilever of stainless steel and the details of calibration are presented in the paper. The uncertainty associated with the measurement system is evaluated.     

Creation of TiN paths on titanium alloy OT4-1 by the use of a laser beam

TiN paths have been created on the surface of the titanium alloy OT4-1 by the use of a laser beam. The results of investigations of structure, phase composition, microhardness and surface roughness of the created TiN paths are given in the paper. The paths created in the work are inhomogenous two-phase mixtures of TiN and -Ti, in which the TiN phase with strong (2 0 0) texture is predominant over the other phase and presents a dendritic structure. © 1998 Chapman & Hall     

Proteome of human endometrium: Identification of differentially expressed proteins in proliferative and secretory phase endometrium

Purpose: To exploit the potential of proteomics to identify and study additional yet‐unidentified important proteins present in human endometrium. Experimental design: The proteome of human endometrium would be established using 2‐DE and MALDI and the data analyzed to identify differential protein expression in the proliferative and secretory phase of the menstrual cycle using PDQuest software and MALDI. Results: In the present work, 2‐DE of human endometrium protein led to the resolution of over 200 spots. Subsequent MALDI analysis of 215 spots allowed the identification of 194 proteins. A total of 57 out of the 215 spots were found to be differentially expressed, out of which 49 could be identified using MALDI. These differentially expressed proteins included structural proteins, molecular chaperones, signaling proteins, metabolic proteins, proteins related to immunity, RNA biogenesis, protein biosynthesis and others. The differential expressions of seven representative proteins in secretory and proliferative phase endometrium tissue were confirmed by immunoblot analysis. Conclusion and clinical relevance: This study establishes the 2‐D proteome of human endometrium represented by 194 identified protein spots. The present data provides an important clue towards determining the function of these proteins with respect to endometrium related diseases.     

Metabolic Pathways for Observed Impacts of Crop Load on Floral Induction in Apple

The triggers of biennial bearing are thought to coincide with embryonic development in apple and occurs within the first 70 days after full bloom (DAFB). Strong evidence suggests hormonal signals are perceived by vegetative apple spur buds to induce flowering. The hormonal response is typically referred to as the floral induction (FI) phase in bud meristem development. To determine the metabolic pathways activated in FI, young trees of the biennial bearing cultivar ‘Nicoter’ and the less susceptible cultivar ‘Rosy Glow’ were forced into an alternate cropping cycle over five years and an inverse relationship of crop load and return bloom was established. Buds were collected over a four-week duration within 70 DAFB from trees that had maintained a four-year biennial bearing cycle. Metabolomics profiling was undertaken to determine the differentially expressed pathways and key signalling molecules associated with biennial bearing. Marked metabolic differences were observed in trees with high and low crop load treatments. Significant effects were detected in members of the phenylpropanoid pathway comprising hydroxycinnamates, salicylates, salicylic acid biosynthetic pathway intermediates and flavanols. This study identifies plant hormones associated with FI in apples using functional metabolomics analysis.     

Blocking the PCNA/NKp44 Checkpoint to Stimulate NK Cell Responses to Multiple Myeloma

Simple SummaryMembrane-associated PCNA is expressed on the surface of human MM cell lines and primary MM cells. Mab 14-25-9 interacts with membrane-associated PCNA and blocks its binding to NK-expressed NKp44, thus activating NK function. We showed that mAb 14-25-9 can serve as an immune checkpoint blocker, enhancing the function of NK cells on target human MM cell lines and primary cells.AbstractMultiple Myeloma (MM) is a devastating malignancy that evades immune destruction using multiple mechanisms. The NKp44 receptor interacts with PCNA (Proliferating Cell Nuclear Antigen) and may inhibit NK cells’ functions. Here we studied in vitro the expression and function of PCNA on MM cells. First, we show that PCNA is present on the cell membrane of five out of six MM cell lines, using novel anti-PCNA mAb developed to recognize membrane-associated PCNA. Next, we stained primary bone marrow (BM) mononuclear cells from MM patients and showed significant staining of membrane-associated PCNA in the fraction of CD38⁺CD138⁺ BM cells that contain the MM cells. Importantly, blocking of the membrane PCNA on MM cells enhanced the activity of NK cells, including IFN-γ-secretion and degranulation. Our results highlight the possible blocking of the NKp44-PCNA immune checkpoint by the mAb 14-25-9 antibody to enhance NK cell responses against MM, providing a novel treatment option.     

Impact of zonal wind on latitudinal variation of total columnar ozone over the Indian Peninsula

Latitudinal and seasonal variability of total columnar ozone from September 2007 to August 2008 across the Indian longitude sector within 10.5° N to 34.5° N and 70.5° E to 94.5° E using satellite data obtained from Aura Ozone Monitoring Instrument (OMI) of National Aeronautics and Space Administration (NASA) Earth Observing System (EOS) is presented. The total column ozone (TCO) over the area of study shows a gradually varying pattern throughout the year. In the post-monsoon (autumn) and winter months, maximum TCO is observed in the north-western part of the subcontinent while the minimum is often observed towards the east at about the same latitudes. A west–east spatial gradient is clearly observed in autumn months. As winter approaches, a north–south spatial gradient becomes more prominent than the east–west gradient. It has been further observed that TCO does not vary significantly over the entire subcontinent in monsoon.