We present a new scheme for visibly-opaque but near-infrared-transmitting filters involving 7 layers based on one-dimensional ternary photonic crystals, with capabilities in reaching nearly 100% transmission efficiency in the near-infrared region. Different decorative reflection colors can be created by adding additional three layers while maintaining the near-infrared transmission performance. In addition, our proposed structural colors show great angular insensitivity up to ±60° for both transverse electric and transverse magnetic polarizations, which are highly desired in various fields. The facile strategy described here involves a simple deposition method for the fabrication, thereby having great potential in diverse applications such as image sensors, anti-counterfeit tag, and optical measurement systems.
This paper presents a new heuristic method for quickly finding a good feasible solution to the channel assignment problem
(CAP). Like many other greedy-type heuristics for CAP, the proposed method also assigns a frequency to a call, one at a time.
Hence, the method requires computational time that increases only linear to the number of calls. However, what distinguishes
the method from others is that it starts with a narrow enough frequency band so as to provoke violations of constraints that
we need to comply with in order to avoid radio interference. Each violation is then resolved by inserting frequencies at the
most appropriate positions so that the band of frequencies expands minimally. An extensive computational experiment using
a set of randomly generated problems as well as the Philadelphia benchmark instances shows that the proposed method perform
statistically better than existing methods of its kind and even yields optimum solutions to most of Philadelphia benchmark
instances among which two cases are reported for the first time ever, in this paper.
Won-Young Shin was born in Busan, Korea in 1978. He received B.S. in industrial engineering from Pohang University of Science and Technology
(POSTECH) in 2001 and M.S in operation research and applied statistics from POSTECH in 2003. Since 2003 he has been a researcher
of Agency for Defense Development (ADD) in Korea. He is interested in optimization of communication system and applied statistics.
Soo Y. Chang is an associate professor in the Department of Industrial Engineering at Pohang University of Science and Technology (POSTECH),
Pohang, Korea. He teaches linear programming, discrete optimization, network flows and operations research courses. His research
interests include mathematical programming and scheduling. He has published in several journals including Discrete Applied
Mathematics, Computers and Mathematics with Application, IIE Transactions, International Journal of Production Research, and
so on. He is a member of Korean IIE, and ORMSS.
Jaewook Lee is an assistant professor in the Department of Industrial Engineering at Pohang University of Science and Technology (POSTECH),
Pohang, Korea. He received the B.S. degree in mathematics with honors from Seoul National University, and the Ph.D. degree
from Cornell University in applied mathematics in 1993 and 1999, respectively. He is currently an assistant professor in the
department of industrial engineering at the Pohang University of Science and Technology (POSTECH). His research interests
include nonlinear systems, neural networks, nonlinear optimization, and their applications to data mining and financial engineering.
Chi-Hyuck Jun was born in Seoul, Korea in 1954. He received B.S. in mineral and petroleum engineering from Seoul National University in
1977, M.S. in industrial engineering from Korea Advanced Institute of Science and Technology in 1979 and Ph.D. in operations
research from University of California, Berkeley, in 1986. Since 1987 he has been with the department of industrial engineering,
Pohang University of Science and Technology (POSTECH) and he is now a professor and the department head. He is interested
in performance analysis of communication and production systems. He has published in several journals including IIE Transactions,
IEEE Transactions, Queueing Systems and Chemometrics and Intelligent Laboratory Systems. He is a member of IEEE, INFORMS and
ASQ. 相似文献
The adverse effect of nitrate on the phosphate release rate in the anaerobic phase was observed and was hardly explainable with conventional EBPR process models. Four possible mechanisms were proposed including substrate competition, reduced fermentation, parallel reaction and sequential reaction. Batch experiments were designed and conducted to identify the dominant mechanism. Results showed that the sequential reaction was the only possible mechanism where only denitrification occurred if any nitrate existed in the anaerobic phase. Then the phosphate release following after the nitrate was completely removed. Nitrate inhibition effect was added into the PHA storage rate to incorporate the sequential reaction in the conventional ASM3 plus EAWAG bio-P module (ASM3 + P). Nitrate inhibition coefficient, K(I,NO,PAO) was found to be as low as 0.05 mg/L. This correlated well with experimental observation where no also meant that the anaerobic compartment of a continuous flow reactor could be seriously affected by the residual nitrate contained in the sludge recycle flow. This phenomenon caused overestimation of the phosphate uptake rate and consequently underestimation of PO4(3-) -P concentration. This problem was resolved by incorporation of a nitrate inhibition term in the ASM3 + P for more accurate simulation of the EBPR process. 相似文献
The homogenization of Ni in powder metal (PM) steel compacts is usually difficult even after high-temperature sintering at
1250°C. An earlier study by the authors demonstrated that this problem can be alleviated through the addition of 0.5 wt pct
Cr in the form of stainless steel powders. To further improve the microstructure and mechanical properties of Ni-containing
PM steels and to understand the mechanisms, an attempt was made in this study using the Fe-3Cr-0.5Mo prealloyed powder as
the base material. The results showed that the distribution of the Ni additives was significantly improved. As a result, the
tensile strength of the Fe-3Cr-0.5Mo-4Ni-0.5C compact sintered at 1250°C reached 1323 MPa. The elongation was higher than
1 pct. These sinter-hardened properties, which were attained using a slow furnace cooling rate, were comparable to those of
the sinter-hardened alloys reported in the literature using accelerated cooling and were equivalent to those of the best quenched-and-tempered
alloys registered in the Metal Powder Industries Federation (MPIF) standards. These improvements were attributed to the positive
effect of Cr addition on alloy homogenization due to the reduction of the repelling effect between Ni and C, as was demonstrated
through the thermodynamic analysis using the Thermo-Calc program. 相似文献
The focused ion beam technique was employed to investigate the atmospheric corrosion morphology of AZ91D. It was found that
the α matrix of the alloy was preferentially corroded in the areas adjacent to intermetallic phases. The most interesting
finding was that the corrosion products in corrosion cavities were pelletlike, which has never been reported before. 相似文献
In this paper, we introduce an escalator (ESC) algorithm based on the least squares (LS) criterion. The proposed algorithm is relatively insensitive to the eigenvalue spread ratio (ESR) of an input signal and has a faster convergence speed than the conventional ESC algorithms. This algorithm exploits the fast adaptation ability of least squares methods and the orthogonalization property of the ESC structure. From the simulation results, the proposed algorithm shows superior convergence performance. 相似文献
Flotation is a water treatment alternative to sedimentation, and uses small bubbles to remove low-density particles from potable water and wastewater. The effect of zeta potential, bubble size and particle size on removal efficiency of the electro-flotation process was investigated because previous model-simulations indicated that these attributes are critical for high collision efficiency between micro-bubbles and particles. Solutions containing Al3+ as the metal ion were subjected to various conditions. The zeta potentials of bubbles and particles were similar under identical conditions, and their charges were influenced by metal ion concentration and pH. Maximum removal efficiency was 98 and 12% in the presence and absence of flocculation, respectively. Removal efficiency was higher when particle size was similar to bubble size. These results agree with modelling simulations and indicate that collision efficiency is greater when the zeta potential of one is negative and that of the other is positive and when their sizes are similar. 相似文献