Cassava retting: Optimisation of a traditional fermentation by an experimental research methodology

Retting, a spontaneous and traditional fermentation of cassava roots in Central Africa, was optimised in terms of time and the quality of the end-product. Optimal conditions were achieved by using an experimental research methodology. Temperature is the most influential factor, with an optimum of 34°C for quicker retting. The roots should be peeled and soaked in water immediately after harvesting to increase the quality of cassava foods. Inoculation of water with juice from a prior retting helps in cassava detoxification but has no influence on the time or the quality of foo-foo. Foo-foo samples had the most favourable organoleptic quality when an incubation temperature of between 28 and 37°C was used. Using optimal conditions, retting time was reduced 3-fold, and foo-foo of high and constant quality could be processed.     

Internal Reduction of Chromium-Doped α-Alumina

(Al,Cr)₂O₃ single crystals and polycrystals were internally reduced at 1873 K in an Al/Al₂O₃ buffer for periods of time ranging from 1 to 100 h. The growth kinetics of the reduction scale were measured. The microstructure of the reduction scale was investigated by SEM and TEM. As a result of the reduction, two types of discrete chromium precipitates developed inside the alumina matrix (inside the single crystal or the polycrystalline grains), each one being characterized by a particular morphology (needle or spheroid) and a low-energy orientation relationship with respect to the alumina matrix. In addition, larger precipitates without special orientation relationship developed along the grain boundaries and at the triple junctions of the polycrystais. In the first part of this paper, the precipitate morphology and size are described in terms of the crystallography of the interface between the two crystal structures in relation to the reduction mechanism. In the second part, the global reduction scale growth is analyzed in terms of point defect fluxes across the reduction scale.     

An investigation of carbon nanotube jet grinding

Since their observation in 1976 and 1991, carbon nanotubes (CNTs) have generated much interest due to their properties and potential applications. CNTs are tubular carbon molecules with remarkable mechanical, electrical, chemical and thermal properties, which make them useful in various applications. Industries producing CNTs via the fluidized bed chemical vapor deposition technique face challenges related to the size of CNT bundles. The two main challenges are agglomeration and agglomerate size distribution control. A solution to these challenges involves the use of jet mills to grind the CNT agglomerates. The goal of this study was to determine whether the nanotubes could be ground with air jets using a commercial jet mill and apply a two-parameter model to describe the grinding process. The present study has indicated that air-jet grinding of CNTs is feasible with a typical commercial jet mill. This paper presents the effect of operational parameters on the arithmetic mean diameter of the ground product. Sonic velocity through the grinding nozzles was required to obtain reasonable grinding rates and relatively narrow particle size distributions. This occurs at high air to solids feedrate ratios. Additionally, a simple attrition model can describe the grinding process in the spiral jet mill.     

Does social dominance generate prejudice? Integrating individual and contextual determinants of intergroup cognitions.

Social dominance orientation (SDO) has been proposed as an important variable in the explanation of prejudice. We distinguish between three conceptualizations of SDO: SDO as a personality trait (personality model), SDO as a moderator of the effects of situational variables (Person X Situation model), and SDO as a mediator of the effect of social position on prejudice (group socialization model [GSM]). Four studies (N = 1,657) looking at the relations between social positions, SDO, and prejudice in a natural setting and in a laboratory setting provide strong support for the GSM. In contrast to previous correlational findings, there is evidence of a cause (dominant social position), an effect (prejudice increases), and a mediator (SDO). These results suggest new perspectives on the integration of individual and contextual determinants of prejudice. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Blocage par injection de modes sous- harmoniques d’un oscillateur utilisant une ligne à retard à ondes de surface

A nonlinear regeneration pulsed oscillator driven by a monochromatic source has been built. Subharmonics of the resonance carrier/modulation are measured with an accuracy of 10^-10 thanks to the use of a double beats measurement set-up. The multiscale analysis of frequency readings reveals a rich fine structure which is in agreement with the nonlinear topological approach of synchronized states.     

Nature of PMMA dissolution process by mixtures of acetonitrile/alcohol (poor solvent/nonsolvent) monitored by FTIR-imaging

The dissolution process of poly(methyl methacrylate), PMMA, in mixtures of the binary systems: acetonitrile/alcohol (methanol, ethanol and 1-propanol), individually poor and nonsolvents respectively for the polymer, was studied at 25 °C using FTIR imaging spectroscopy. To investigate this cosolvency phenomenon and the kinetics of the dissolution process, the spatial resolution and sensitivity of FTIR imaging were used. It has been found that the PMMA dissolution rate anomalously increases almost in a parabolic way independently of the solvent system used in this study. These results were interpreted assuming that the dissolution of a polymer by a mixture of solvents is governed by a complex dependence of the solvent molecules size and their thermodynamic characteristics. The kinetics of the PMMA dissolution by AcN/alcohol solvent mixtures were interpreted using conventional Arrhenius behavior in which the activation energy has a simple dependence on the thermodynamic quality and the molecular weight of the solvent mixture.     

Transport of Gellan Gum Microbeads in Soil Columns of Various Grain Size Distributions

The transport of gellan gum microbeads as potential cell carriers was investigated in horizontal columns packed with different grain size classes of gravel (2–16 mm) and sand (0.25–2 mm). A suspension of microbeads was pulsed into each column for 6 h, followed by injection of water for 42 h. In general, the total amount of microbeads travelling across a given section of the column increased with injection time but decreased towards the column outlet, varying as a direct function of grain size. The results of this study demonstrate the feasibility of the transport of gellan gum microbeads through medium sand to medium gravel across distances up to 110 cm.     

Cellule pour etudes electrochimiques sous pression; application a l''etude de la force electromotrice de la pile Cu(Hg)/CuSO4/Hg2SO4/Hg

For a study of the possible electrochemical processes occurring in the formation of polymetallic marine nodules, a vessel has been adjusted for electrochemical studies which allows to attain a pressure of about 500 atm. In order to test this cell, we have been studying the influence of pressure on the electromotive force of the cell

and we have determined an experimental pressure coefficient (?E/?p)_T,ni = 1,04.10^?5 volt.atm^?1.     

Study of the Interfacial Reaction of Styrene/Maleic Anhydride Copolymerand (Amine)-Terminated Butadiene-Acrylonitrile Copolymer Using FTIR Imaging Techniques

The interfacial reaction between styrene/maleic anhydride copolymer (SMA) and amine-terminated butadiene-acrylonitrile copolymer (ATBA) was observed using Fourier transform infrared (FTIR) imaging spectroscopy. The anhydride and amine reacted to form an imide. Each component was detected using a characteristic wavenumber, which was 1601 cm -1 for SMA, 2237 cm -1 for ATBA, and 1701 cm -1 for the imide. FTIR images were taken as the reaction proceeded at 150, 160, 170, and 180°C. At low temperatures (150 and 160°C), diffusion-controlled kinetics were observed since interdiffusion between the reactants did not appear in the images. On the other hand, both the diffusion front and the reaction front are observed in the images at high reaction temperatures (170 and 180°C), which indicates that the kinetics became reaction-controlled rather than diffusion-controlled. Absorbance profiles were extracted from the images and used for the calculation of the extent of reaction. The data were analyzed using the Frederickson and Milner theory based on the assumption of diffusion-controlled kinetics, and this theory fit the low reaction temperature data.