TEM Studies of High Temperature Corrosion Behaviour of TiAl Intermetallics with Surface Modifications

The oxidation/sulphidation behaviour of a Ti‐46.7Al‐1.9W‐0.5Si alloy with a TiAl₃ diffusion coating was studied in an environment of H₂/H₂S/H₂O at 850^oC. The kinetic results demonstrate that the TiAl₃ coating significantly increased the high temperature corrosion resistance of Ti‐46.7Al‐1.9W‐0.5Si. The SEM, EDX, XRD and TEM analysis reveals that the formation of an Al₂O₃ scale on the surface of the TiAl₃‐coated sample was responsible for the enhancement of the corroison resistance. The Ti‐46.7Al‐1.9W‐0.5Si alloy was also modified by Nb ion implantation. The Nb ion implanted and as received sampels were subjected to cyclic oxidation in an open air at 800^oC. The Nb ion implantation not only increased the oxidation resistance but also substantially improved the adhesion of scale to the substrate.     

High-performance MIM capacitor using ALD high-k HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectrics

For the first time, we successfully fabricated and demonstrated high performance metal-insulator-metal (MIM) capacitors with HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectric using atomic layer deposition (ALD) technique. Our data indicates that the laminate MIM capacitor can provide high capacitance density of 12.8 fF//spl mu/m/sup 2/ from 10 kHz up to 20 GHz, very low leakage current of 3.2 /spl times/ 10/sup -8/ A/cm/sup 2/ at 3.3 V, small linear voltage coefficient of capacitance of 240 ppm/V together with quadratic one of 1830 ppm/V/sup 2/, temperature coefficient of capacitance of 182 ppm//spl deg/C, and high breakdown field of /spl sim/6 MV/cm as well as promising reliability. As a result, the HfO/sub 2/-Al/sub 2/O/sub 3/ laminate is a very promising candidate for next generation MIM capacitor for radio frequency and mixed signal integrated circuit applications.     

Gamma-irradiation-induced Ag/SiO2 composite films and their optical absorption properties

Small Ag particles or clusters dispersed mesoporous SiO₂ composite films were prepared by a new method: First the matrix SiO₂ films were prepared by sol-gel process combined with the dip-coating technique, then they were soaked in AgNO₃ solutions followed by irradiation of γ-ray at room temperature and in ambient pressure. The structures of these films were examined by X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), and optical absorption spectroscopy. It has been shown that the Ag particles grown within the porous SiO₂ films are very small, and they are isolated and dispersed from each other with very narrow size distributions. With increasing the soaking concentration and an additional annealing, an opposite peakshift effect of the surface plasmon resonance (SPR) was observed in the optical absorption measurements.     

Towards intelligent dressing

The aim of this article is to state the principles of an intelligent monitoring and control system for the grinding machine, comprising the dressing process as well as grinding stability.     

Finite element piezothermoelasticity analysis and the active control of FGM plates with integrated piezoelectric sensors and actuators

 An efficient finite element model is presented for the static and dynamic piezothermoelastic analysis and control of FGM plates under temperature gradient environments using integrated piezoelectric sensor/actuator layers. The properties of an FGM plate are functionally graded in the thickness direction according to a volume fraction power law distribution. A constant displacement-cum-velocity feedback control algorithm that couples the direct and inverse piezoelectric effects is applied to provide active feedback control of the integrated FGM plate in a closed loop system. Numerical results for the static and dynamic control are presented for the FGM plate, which consists of zirconia and aluminum. The effects of the constituent volume fractions and the influence of feedback control gain on the static and dynamic responses of the FGM plates are examined. Received: 13 March 2002 / Accepted: 5 March 2003 The work described in this paper was supported by a grant awarded by the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. CityU 1024/01E).     

Quantitative analysis of ephedrines in urine by HPLC

Simultaneous determination of six ephedrines in urine sample has been achieved by high performance liquid chromatography on a Lichrospher RP-18 column, using methylamphetamine as internal standard. The 6 ephedrines are well separated in 25 minutes with resolution better than 1.8. This method has high recovery, selectivity and reproducibility, and the linearity is satisfactory from 1.5 micrograms/ml to 25 micrograms/ml with correlation coefficients better than 0.999.     

Nonlinear protein binding and enzyme heterogeneity: effects on hepatic drug removal

The kinetics of substrate removal by the liver and the resulting nonlinear changes in unbound fraction along the flow path at varying input drug concentrations were examined by a model simulation study. Specifically, we varied the binding association constant, KA, and the Michaelis-Menten constants (Km and Vmax) to examine the steady state drug removal (expressed as hepatic extraction ratio E) and changes in drug binding for (i) unienzyme systems and (ii) simple, parallel metabolic pathways; zonal metabolic heterogeneity was also added as a variable. At low KA, E declined with increasing input drug concentration, due primarily to saturation of enzymes; only small differences in binding were present across the liver. At high KA, a parabolic profile for E with concentration was observed; changes in unbound fraction between the inlet and the outlet of the liver followed in parallel fashion. Protein binding was the rate-determining step at low input drug concentrations, whereas enzyme saturation was the rate-controlling factor at high input drug concentration. Heterogeneous enzymic distribution modulated changes in unbound fraction within the liver and at the outlet. Despite marked changes in unbound fraction occurring within the liver for different enzymic distributions, the overall transhepatic differences were relatively small. We then investigated the logarithmic average unbound concentration and the length averaged concentration as estimates of substrate concentration in liver in the presence of nonlinear drug binding. Fitting of simulated data, with and without assigned random error (10%), to the Michaelis-Menten equation was performed; fitting was repeated for simulated data obtained with presence of a specific inhibitor of the high-affinity, anteriorly distributed pathway. Results were similar for both concentration terms: accurate estimates were obtained for anterior, high affinity pathways; an overestimation of parameters was observed for the lower affinity posteriorly distributed pathways. Improved estimations were found for posteriorly distributed pathways upon inhibition with specific inhibitors; with added random error, however, the improvement was much decreased. We applied the method for fitting of several sets of metabolic data obtained from rat liver perfusion studies performed with salicylamide (SAM) (i) without and (ii) with the presence of 2,6-dichloro-4-nitrophenol (DCNP), a SAM sulfation inhibitor. The fitted results showed that SAM sulfation was a high-affinity high-capacity pathway; SAM glucuronidation was of lower affinity but comparable capacity as the sulfation pathway, whereas SAM hydroxylation was of lower affinity and lower capacity.