Systematic characterization of Cl2 reactive ion etchingfor improved ohmics in AlGaN/GaN HEMTs

Pre-metal-deposition reactive ion etching (RIE) was performed on an Al_0.3Ga_0.7N/AlN/GaN heterostructure in order to improve the metal-to-semiconductor contact resistance. An optimum AlGaN thickness for minimizing contact resistance was determined. An initial decrease in contact resistance with etching time was explained in terms of removal of an oxide surface layer and/or by an increase in tunnelling current with the decrease of the AlGaN thickness. The presence of a dissimilar surface layer was confirmed by an initial nonuniform etch depth rate. An increase in contact resistance for deeper etches was experienced. The increase was related to depletion of the two-dimensional (2-D) electron gas (2-DEG) under the ohmics. Etch depths were measured by atomic force microscopy (AFM). The contact resistance decreased from about 0.45 Ωmm for unetched ohmics to a minimum of 0.27 Ωmm for 70 Å etched ohmics. The initial thickness of the AlGaN layer was 250 Å. The decrease in contact resistance, without excessive complications on device processing, supports RIE etching as a viable solution to improve ohmic contact resistance in AlGaN/GaN HEMTs     

Effects of hydrolysis on the physical properties of short glass-fibre reinforced poly(ethylene terephthalate)

The mechanical fracture strength and toughness of short-fibre composites, injection moulded from compounds of poly(ethylene terephthalate) (PET) containing 10 and 30% (by weight) (w/o) glass, have been investigated and the dependence upon matrix hydrolytic stability determined. Mouldings have been characterised by several physical techniques to evaluate molecular weight, degradation rates, crystallinity and morphology, whilst time-dependent gravimetric data were derived to quantify sorption kinetics and allow comparisons with theoretical reaction rates to be made. During melt processing, PET is hydrolysed extremely rapidly by traces of moisture (<0.02w/o). yet the inherent strength of moulded composites declines significantly only below an apparently critical molecular weight. However, on long-term humid ageing in hot water, impact behaviour especially is rendered more complex by simultaneous crystallisation, molecular reorder and losses of interfacial bond strength.     

Formaldehyde content of milk in goats fed formaldehyde-treated soybean oil-meal

Formaldehyde is used in ruminant feeding for different purposes including the protection of dietary proteins from ruminal degradation. The formaldehyde content of milk of goats fed various levels of formaldehyde-treated soybean oil-meal has been determined by using a sensitive HPLC method. Results showed a significant linear correlation between ingested formaldehyde and formaldehyde concentration in milk. About 0.02% of ingested formaldehyde was excreted in milk, as free formaldehyde.     

A series active power filter based on a sinusoidalcurrent-controlled voltage-source inverter

A series active power filter working as a sinusoidal current source, in-phase with the mains voltage, has been developed and tested. The amplitude of the fundamental current in the series filter is controlled through the error signal generated between the load voltage and a pre-established reference. The control allows an effective correction of power factor, harmonic distortion and load voltage regulation. Compared with previous methods of control developed for series active filters, this method is simpler to implement because it is only required to generate a sinusoidal current, in-phase with the mains voltage, the amplitude of which is controlled through the error in the load voltage. The proposed system has been studied analytically and tested using computer simulations and experiments. In the experiments, it has been verified that the filter keeps the line current almost sinusoidal and in-phase with the line voltage supply. It also responds very quickly under sudden changes in load conditions, reaching its steady-state in about two cycles of the fundamental     

Film cracking and debonding in a coated fiber

A fracture mechanics based methodology for the determination of interface fracture toughness from crack spacing in a thin coated fiber is presented. The coating (film) may be regarded as the matrix material in typical experiments employing this configuration. Matrix crack spacing is considered to be the result of a competitive process between matrix segmentation and interface debonding which are assumed to be governed by critical energy release rate criteria. Matrix cracks are assumed to form by the process of channeling in the circumferential direction and steady state conditions are assumed at the matrix crack front in the channeling direction. Energy release rates are determined using domain integral procedures in conjunction with the finite element method. The minimum crack spacing is obtained as a function of applied stress for different values of interface fracture toughness. A methodology to relate the saturated crack spacing to interface fracture toughness is developed. Interfaces are classified into three categories: weak, intermediate and strong. It is shown that in experiments of this type, quantitative information about the interface fracture toughness can be obtained for intermediate interfaces while qualitative information may be obtained for weak and strong interfaces.     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

Reactive Power Compensation Technologies: State-of-the-Art Review

This paper presents an overview of the state of the art in reactive power compensation technologies. The principles of operation, design characteristics and application examples of Var compensators implemented with thyristors and self-commutated converters are presented. Static Var generators are used to improve voltage regulation, stability, and power factor in ac transmission and distribution systems. Examples obtained from relevant applications describing the use of reactive power compensators implemented with new static Var technologies are also described.     

Impact of dams on point bar habitat: a case for the extirpation of the Sacramento Valley Tiger Beetle,C. hirticollis abrupta

Quantitative analyses of flow and stage data, remote sensing and geographic information systems analysis, and field studies were used to assess the impact of dams and diversions on the point bar habitat of the Sacramento Valley Tiger Beetle (Cicindela hirticollis abrupta). The reaches of interest include sites of known historic populations of C. h. abrupta along the Sacramento River from approximately 8 km north of Colusa southward to the confluence with the Feather River and along the Feather River between Yuba City and its confluence with the Sacramento River. The results from this study show that construction of two major dams has altered flows such that prolonged and increased flows during summer, fall, and early winter have most likely disrupted life cycles, flooded larvae, drowned overwintering adults and led to high mortality. Additionally, habitat availability has decreased over time because point bars have decreased in number and area causing increased distances between populations and isolation of populations. Moreover, point bar armouring, channel scouring, altered flows, redirected flows through weirs, and lithologic controls have produced a bimodal distribution of mean grain sizes in the Sacramento River in which the more northern bars contain gravel deposits and more southern bars possess fine sands. These conditions negatively alter moisture retention and sediment compaction and, consequently, burrowing conditions needed by this tiger beetle. Additionally, more stabilized flows (reduced variability) and increased fine‐grained deposition have enabled development and encroachment of vegetation onto the sand bars. Finally, human stresses, such as foot traffic and vehicular traffic may have interfered with burrowing, ovipositing, and foraging. The combination of these stress factors has most likely led to a reduction in source populations and, ultimately, the apparent extirpation of the entire metapopulation. Copyright © 2006 John Wiley & Sons, Ltd.