Dynamic Effect of Soil-Tunnel Interface Under Dynamic Loading

Soil Mechanics and Foundation Engineering - The resilience of the Daikai subway station during the Kobe earthquake is taken as a case study of tunnel endurance at various points under different...     

Low Cost Portable Solution for Real-Time Complete Detection and Analysis of Heart Sound Components

Wireless Personal Communications - Detection of heart sound and analysis is required to determine heart rate, heart sound components (S1, S2 and murmurs), and is an important step to...     

Intestine-Specific, Oral Delivery of Captopril/Montmorillonite: Formulation and Release Kinetics

The intercalation of captopril (CP) into the interlayers of montmorillonite (MMT) affords an intestine-selective drug delivery system that has a captopril-loading capacity of up to ca. 14 %w/w and which exhibits near-zero-order release kinetics.     

Modelling the dynamics of design error induced rework in construction

Rework that is experienced in construction projects is often caused by errors made during the design process. Factors that contribute to design errors are identified and used to design and develop a systems dynamics model, which is used to simulate a number of practical scenarios that can be used to reduce design errors and rework. The model presented in this paper can enable design and project managers to understand better the process of design documentation and how design errors occur in construction projects.     

Fabrication of Functionally Graded SiAlON Ceramics by Tape Casting

Functionally graded SiAlON ceramics (FG-SiAlONs) were successfully prepared by the tape casting and lamination approach. Non-aqueous SiAlON slurries with five different α to β-SiAlON ratios (85α:15β, 70α:30β, 55α:45β, 40α:60β, and 25α:75β) were prepared by a 66 methyl ethyl ketone/34 ethanol (vol%) mixture. Phase and microstructure analyses incorporation with hardness measurements clearly show that the FG-SiAlONs, prepared by tape casting, exhibit a continuous and gradual change in composition and hardness. Thus, the tape casting approach is a viable method to produce FG-SiAlONs with a precisely controlled composition, and subsequently properties, as a function of position.     

Sr2+–Mg2+-Doped SiAlON Ceramics

In the present work, multi-cation-doped (Sr²⁺–Mg²⁺) SiAlON ceramics were investigated. MgO and SrO were used in 100:0 and 50:50 molar ratios. The mixture was sintered at 1800° and 1830°C for 1 h in a gas pressure-sintering furnace. The results showed that sintered samples were composed of mainly α- and β-SiAlON phases and small amounts of some Sr-containing phases and SiAlON polytypes. According to Rietveld analysis of X-ray diffraction patterns, Mg is incorporated into the α-SiAlON structure. However, the incorporation of Sr is limited.     

Absorption of carbon dioxide into aqueous blends of 2-amino-2-methyl-1-propanol and monoethanolamine

This work presents an investigation of CO₂ absorption into aqueous blends of 2-amino-2-methyl-1-propanol (AMP) and monoethanolamine (MEA). The acid gas mass transfer has been modeled using equilibrium-mass transfer-kinetics-based combined model to describe CO₂ absorption into the amine blends according to Higbie's penetration theory. The effect of contact time and relative amine concentration on the rate of absorption and enhancement factor were studied by absorption experiment in a wetted wall column at atmospheric pressure. The model was used to estimate the rate coefficient of the reaction between CO₂ and monoethanolamine at 313 K from experimentally measured absorption rates. A rigorous parametric sensitivity test has been done to identify the key systems’ parameters and quantify their effects on the mass transfer using the mathematical model developed in this work. The model predictions have been found to be in good agreement with the experimental rates of absorption of CO₂ into (AMP+MEA+H₂O).     

Dextrin crosslinked with poly(lactic acid): A novel hydrogel for controlled drug release application

A new class of biodegradable crosslinked hydrogel, consisting of hydrophobic polylactic acid (PLA) and hydrophilic dextrin in presence of crosslinker N,N‐methylene bisacrylamide (MBA) has been synthesized by free‐radical polymerization technique using potassium persulfate (KPS) as initiator. By variation of crosslinker concentration, a series of hydrogels have been prepared and the optimized grade has been selected on the basis of higher crosslinking efficiency as well as lower equilibrium swelling characteristics, XRD analysis. The hydrogels have been characterized by FTIR spectra, ¹³C‐NMR spectra, CHN analysis, SEM analysis, swelling characteristics, and toxicity study. In vitro release study of model drugs (ciprofloxacin and ornidazole) from hydrogel matrix has been performed in various buffer solutions at 37°C. The drug release kinetics and mechanism have been studied using zero order, first‐order kinetic models, Korsemeyar–Peppas model, Higuchi model, Hixson–Crowell model, and nonlinear Kopcha model. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40039.     

Single-electron transfer living radical copolymerization of SWCNT-g-PMMA via graft from approach

The sidewall functionalization of single-walled carbon nanotubes (SWCNTs) was established by poly (methyl methacrylate) (PMMA) using controlled radical polymerization (CRP) method. A bromide functionalized SWCNT (SWCNT-Br) has been used as an initiator for the synthesis of SWCNT-graft-PMMA (SWCNT-g-PMMA). The efficiency of the sacrificial initiator (S) was monitored during the polymerization process. The obtained polymers possess a uniform distribution of molecular weight with a lower polydispersity index of 1.36. The SWCNTs-based initiator acts as an efficient medium for the controlled growth of polymer on the SWCNTs surfaces. The presence of bimodal gel permeation chromatographic (GPC) curve for the SWCNT-g-PMMA(S) obtained through sacrificial initiator (S) confirms uncontrolled behavior. However, the clear sharp peak for SWCNT-g-PMMA obtained without sacrificial initiator shows its well-controlled process of polymerization, which acts as a mimic to bone cement. The efficiency of the functionalization of SWCNT and the controlled formation of SWCNT-g-PMMA composites were characterized by TGA, Raman, TEM, NMR, XPS and dispersion measurements.     

Effect of the compatibilizer,on the engineering properties of TPV based on Hypalon® and PP prepared by dynamic vulcanization

Elastomeric Chlorosulfonated polyethylene (Hypalon^®) and thermoplastic Polypropylene (PP) based thermoplastic vulcanizates (TPVs) were prepared in presence of different doses of compatibilizer, maleic anhydride grafted PP (PP‐g‐MA) by employing dynamic vulcanization technique. The effect of incorporation in different proportions of compatibilizer on mechanical, spectral, morphological, thermal, and rheological properties of such TPVs was studied and the same were compared to that of virgin PP and amongst themselves. The mechanical analysis of the prepared TPVs exhibited significant improvements in stress at 25% modulus, ultimate tensile strength (UTS), and hardness values. FTIR studies revealed that a chemical interaction had taken place between Hypalon^® and functionalized compatibilizer during the process of dynamic vulcanization which led to an enhancement of interfacial adhesion between them. The two‐phase morphologies were clearly observed by scanning electron microscopic studies. The T_g values of Hypalon^® was modified in the TPVs as exhibited by differential scanning calorimetric studies. TGA studies indicated the increase in thermal stability of all TPVs with respect to the elastomeric Hypalon^®. Rheological properties showed that the compatibilizer reduces the melt viscosity of TPVs and thus facilitates the processibility of such TPVs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40312.