Intravaginal Controlled Administration of Flurogestone Acetate: (III) Development of Rate-Control Vaginal Devices

A Rate-Control vaginal device was developed which overcomes the low bioavailability and unpredictable Q - t^1/2 type release and absorption rate profiles of flurogestone acetate delivered by the currently marketed Syncro-Mate pessary.

The in vitro release and vaginal absorption profiles from the Rate-Control vaginal device were run simultaneously, a linear Q - t relationship was obtained with a significant improvement in bioavailability. A mathematical model was developed to correlate the in vitro drug release and the vaginal absorption profiles of flurogestone acetate from the vaginal devices.

The design, development and the simultaneous release and absorption profiles of flurogestone acetate from this new vaginal device were outlined and discussed.     

Development of Anticandidal Delivery Systems: (I) Anticandidal Activities of Antifungal Agents and Synergistic Combination with Other Drugs

Susceptibility testing with antifungal agents, e. g., minimum inhibitory concentration (MIC) determination, is performed to obtain reliable data that permit selection of the most suitable agents for treatment of an infective condition. To determine the drugs that provide maximum effectiveness against oral candidiasis, the MICs of various antifungal agents were determined. Also, synergism between two chosen antifungal agents was evaluated, and the effect of benzocaine, an anesthetic, and hydrocortisone, an antiinflammatory agent, on their MICs was examined. It was observed that among all the drugs tested, clotrimazole was the most promising candidate for use as an oral local antifungal. The combination of clotrimazole and chlorhexidine resulted in a decrease in the MIC. While the addition of hydrocortisone to this combination resulted in a slight increase in the MIC, the inclusion of benzocaine resulted in a substantial decrease in the MIC of the antifungal agent combination.     

Renal R2 chemoreceptor activity is attenuated after back heating in the rat

The aim of the present study was to determine the afferent connections of the nucleus accumbens in snakes, in particular its catecholaminergic input. For that purpose, in vitro and in vivo applications of retrograde tracers in the nucleus accumbens of Elaphe guttata were combined with tyrosine hydroxylase (TH) immunohistochemistry. Both techniques revealed telencephalic inputs to the nucleus accumbens originating from the diagonal band of Broca, ventral pallidum, amygdaloid complex, and dorsal cortex. Major diencephalic inputs arise from the dorsomedial thalamic nucleus and the hypothalamus. In the brainstem, a few retrogradely labeled cells were observed in the raphe nucleus and the locus coeruleus. Considerably more cells were found in the midbrain tegmentum. Within the confines of the locus coeruleus and, in particular, the midbrain tegmentum, retrogradely labeled cells stained also for TH suggesting that those areas constitute the major catecholaminergic input to the nucleus accumbens of snakes. The experimental approach used in the present study, in particular the in vitro technique, seems to be very suited for studying the development of basal ganglia organization of reptiles in the near future.     

Onset of gas self-induction and power consumption after gas induction in an agitated tank

The behavior of inducted gas from liquid surface and the; power requirements in an agitated tank using a mechanical agitator are studied in order to increase the amount of gas self-induction and the gas retention time for gas absorption. A 45° six-blade downward impeller turbine was utilized in this study. Air and water, air and 40 wt% 60 wt%, and 80 wt% of glycerin water, and air and 106 cP silicon oil were employed as gas and liquid phases. Variables which were studied included geometrical factors (immersed depth of impeller, baffle with and diameter of impeller) and the physical properties of the liquid (viscosity, density, and surface tension). The correlations for the onset speed of impeller and power consumption after gas induction in the agitated tank are established from our experimental results. The amount of gas self-induction from the liquid surface in the agitated tank increases with increasing impeller diameter and speed and decreases with increasing baffle width, depth of impeller and viscosity of liquid.     

Low RF noise and power loss for ion-implanted Si having an improved implantation process

Very-low-transmission line noise of <0.25 dB at 18 GHz and low power loss /spl les/0.6 dB at 110 GHz have been measured on transmission lines fabricated on proton-implanted Si. In contrast, a standard Si substrate gave much higher noise of 2.5 dB and worse power loss of 5 dB. The good RF integrity of proton-implanted Si results from the high isolation impedance to ground, as analyzed by an equivalent circuit model. The proton implantation is also done after forming the transmission lines at a reduced implantation energy of /spl sim/4 MeV. This enables easier process integration into current VLSI technology.     

Effects of α‐form or β‐form nuclei on polymorphic crystalline morphology of poly(butylene adipate)

The effects of α‐form and β‐form nuclei on polymorphic morphology of poly(butylene adipate) (PBA) upon recrystallization from the molten state up to various T_max values were examined by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and polarized light microscopy (PLM). In this study, PBA with complex melting and polymorphism behaviour was used as a model for examining different types and extents of residual nuclei. As the PBA initially containing the sole α‐crystal was brought to a molten state of various T_max, the extents of trace α‐form crystal nuclei varied and were dependent on T_max. Furthermore, it did not matter whether, initially, the PBA contained α‐ or β‐form crystals (or both) because only a single type of α‐nuclei could be left upon treatment to the molten liquid state at T_max. Therefore, only the α‐crystal in PBA had ‘memory capacity’ in the molten liquid state while the β‐crystal did not. This was so because the latter had been completely transformed into the solid state prior to being heated into a liquid. PBA crystallized before α‐nuclei could be packed into α‐crystal, regardless of the crystallization temperature (T_c). For recrystallization from molten PBA without any nuclei, the crystalline polymorphism was correspondingly influenced by T_c. Copyright © 2005 Society of Chemical Industry     

Methylaluminoxane/haloalkane as initiator system for styrene polymerization

Summary Styrene polymerization was initiated by methylaluminoxane in the presence of haloalkane. The propagating species are shown by trapping experiments and electron paramagnetic resonance to be both radicals and cations.     

Therapeutic strategies in acute myocardial infarction. Results of STIM 93 registry

A registry was set up by the national college of cardiologists practicing in general hospitals in February 1993. The data concerned mode of admission, demographic details, initial clinical and haemodynamic evaluation and hospital outcome. Special attention was given to the electrocardiographic changes before and, in patients receiving thrombolytic therapy, after treatment. An analysis of predictive factors for mortality was performed both in the group of patients "revascularised" and in the group treated conventionally. One thousand and twenty three cases from 327 centres were analysed. There were 1292 men and 531 women, with an average age of 67.9 years. The average time interval from onset of symptoms to hospital admission was 5 h 30 min, 56.8% of patients arriving within 6 hours. 36.4% of the population underwent thrombolysis or angioplasty, 75% of patients under 75 years of age admitted before the 5th hours underwent a procedure of myocardial revascularisation. The hospital mortality was 14%, 8.7% in those revascularised and 17% in patients treated conventionally. Factors predictive of mortality were age, female gender, Killip Classes III or IV, systolic blood pressure of less than 100 mmHg, heart rate of more than 100/min and contraindications of thrombolysis. The maximum ST depression, the sum of ST depression, the sum of ST elevation and depression, were also significant predictive factors of a fatal hospital outcome in the whole population group and in patients treated conventionally. In the reperfused group, only the initial sum of ST elevation and depression was predictive of mortality: 120 minutes after the beginning of thrombolysis, the sum of ST elevations and of elevations and depressions was predictive of twice the mortality when the values exceeded 0.6 mv and 1.4 mv respectively.     

Comparison of image reconstruction by using near‐field and far‐field data for an imperfect conductor

Image reconstruction by using near‐field and far‐field data for an imperfectly conducting cylinder is investigated. A conducting cylinder of unknown shape and conductivity scatters the incident wave in free space and the scattered near and far fields are measured. By using measured fields, the imaging problem is reformulated into an optimization problem and solved by the genetic algorithm. Numerical results show that the convergence speed and final reconstructed results by using near‐field data are better than those obtained by using far‐field data. This work provides both comparative and quantitative information. © 2001 John Wiley & Sons, Inc. Int J RF and Microwave CAE 11: 69–73, 2001.     

Casper: space exploration through continuous planning

The most interesting places can often be the most dangerous ones, and space exploration is no exception. The dynamic surfaces of comets, the turbulent atmospheres of the gas giants, and the hypothesized subsurface ocean of Europa all call for exploration, and are all very risky for on-site robotic explorers. The Casper (continuous activity, scheduling, planning, execution, and replanning) software system provides critical reasoning capabilities to robotic explorers. To show how it works, we first describe Casper's internal workings and then look at the Three Corner Sat and the Autonomous Sciencecraft Constellation missions, highlighting Casper's contributions to each.