17-4PH不锈钢纳米析出物的磁小角中子散射研究

本文充分发挥中子对磁灵敏、穿透力强等技术优势,利用加载磁场小角中子散射实验技术研究核电站实际服役14年的阀杆17 4PH不锈钢样品。结果表明,与不加磁场时相比,加载磁场条件下二维散射图谱呈明显各向异性,在散射矢量垂直于磁场方向上散射强度显著增强。利用多分散球模型对数据进行拟合,结合原子探针实验结果分析得出,衬度的增加降低了Cu析出物周围元素分布不均匀对散射的相对贡献,从而有助于更加准确地获得Cu纳米析出物的尺寸。     

Sheet gamma TiAl: Status and opportunities

Gamma TiAl alloys have attractive properties such as low density, high-temperature strength, and high modulus, oxidation, and burn resistance. As a result, these alloys have the potential to replace heavier superalloys in aircraft engine components. Gamma TiAl alloys were investigated in the 1950s but were too brittle for thermo-mechanical processing. However, interest in this class of material rekindled with several U.S. aerospace programs: the National Aerospace Plane, the Integrated High Performance Turbine Engine Technology, and Enabling Propulsion Materials/High Speed Civil Transport, as well as German hypersonic technology programs. Intense metallurgical and metal processing research during the last two decades led to significant progress in this area. As a result, gamma TiAl alloys are now available in all conventional product forms: ingots, forgings, extrusions, and sheets. This article reviews the current status of sheet gamma TiAl technology and its future opportunities. For more information, contact Gopal Das, Pratt & Whitney, 400 Main Street, E. Hartford, CT 06108 USA; (860) 557-1413; e-mail gopal.das@pw.utc.com.     

Evaluation of uncertainties in sewer condition assessment

Closed Circuit Television Inspection is used since decades as industry standard for sewer system inspection and structural performance evaluation. In current practice, inspection data are helpful to support asset management decisions. However, the quality and uncertainty of sewer condition assessment is rarely questioned. This article presents a methodology to determine the probability to underestimate, overestimate or accurately estimate the real condition of a pipe using visual inspection. The approach is based on the analysis of double inspections of the same sewer pipes and has been tested using the extensive data-set of the city of Braunschweig in Germany. Results indicate that the probability to inspect correctly a pipe in poor condition is close to 80%. The probability to overestimate the condition of a pipe in bad condition (false negative) is 20% whereas the probability to underestimate the condition of a pipe in good condition (false positive) is 15%. Finally, sewer condition evaluation can be used to assess the general condition of the network with an excellent accuracy probably because the respective effects of false positive and false negative are buffered.     

Erschließung eines Marmorkarstvorkommens als mitteltiefer Erdwärmesondenspeicher im Tuxertal,Tirol

Borehole heat exchangers can be economically beneficial for meeting heating and cooling demands of houses or buildings. In karst aquifers development of thermal storage and exchange systems may be problematic in terms of groundwater protection and storage design, due to possibly high groundwater velocities. The new development of the Hochstegen marble unit in the Tux Valley (Zillertal, Austria) was designed in two stages for the requested cooling and heating demands. An enhanced geothermal response test was completed using optical frequency domain reflectometry in an exploration drillhole. Additional studies focussing on local geology and hydrology were also conducted. Geothermal parameters obtained at precise depths allowed differentiating between conductive and convective heat flow and were correlated with the lithostratigraphically-conditioned karst characteristics. The borehole heat exchanger field was developed with nine 400 m deep dual U?shaped tube probes in 2013 for 1 GWh/a extraction and 400 MWh/a induction. Along with borehole geophysics and geothermal response tests, the study has provided relevant geothermal data for improving storage design and exploration.     

《构成的风景：设计分析、类型与实践》（英语）

在风景园林设计中,对于场地的研究自然是至关重要的设计步骤。如何分解场地先前存在的层面、痕迹和元素,并且让他们对重新构成的风景产生作用？     

The geographic distribution of fluoride in surface and groundwater in Ethiopia with an emphasis on the Rift Valley

This paper analyzes the most extensive database on fluoride distribution in Ethiopia. Of the total 1438 water samples tested, 24.2% had fluoride concentrations above the 1.5 mg/l recommended optimum concentration recommended by WHO. Regionally, by far the highest fluoride levels were recorded in the Rift Valley, where 41.2% of all samples exceeded the 1.5 mg/l level. Only 1.0% of the samples from the central and northwestern highlands and 10.0% in the southeastern highlands exceeded 1.5 mg/l. Larger proportions of deep wells (50.0%) and hot springs (90.0%) than shallow wells (27.2%) and cold springs (12.6%) exceeded the 1.5 mg/l level. The highest fluoride concentrations were recorded for Rift Valley lakes Shala (264.0 mg/l) and Abijata (202.4 mg/l) and the lowest in Lake Tana, and rivers, wells and springs in the highlands. The fluoride concentrations of the Awash River, which originates in the highlands and flows through the Rift Valley, increase downstream, giving concern over the current diversion of high-fluoride water from Lake Beseka. Of the various flourosis prevention methods tried in Ethiopia, the treatment of surface water has been shown to be the most feasible and effective for towns and large commercial farms in the Rift Valley, although defluoridation methods should be considered for smaller rural communities.     

Element contents in leaves of four plant species (birch, mountain ash, fern and spruce) along anthropogenic and geogenic concentration gradients

Forty samples each of leaves of birch (Betula pubescens Ehrh.), European mountain ash (Sorbus aucuparia (L.)) and bracken fern (Pteridium aquilinum (L.) Kuhn) as well as spruce needles (Picea abies (L.) Karsten) were collected along a 120 km south-north transect running through Norway's largest city, Oslo. Concentrations of 25 chemical elements (Ag, Au, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, La, Mg, Mn, Mo, Na, Ni, P, Pb, S, Sb, Sr, Ti, and Zn) as well as loss on ignition for the 4 sample materials are reported. The decline of input of sea spray with distance from the coast, geology, pH and anthropogenic contamination all played a role for the observed element concentrations in the leaves. Although growing under exactly the same natural conditions each plant species displayed quite unique uptake characteristics. Plant-species dependency and individual differences in the reaction of the plant leaves to different element sources make the investigated species of very limited value as bioindicators of anthropogenic activities. Anthropogenic contamination influences plant-leaf element content within a limited distance ( approximately 20 km) from the source.