Corrosion of tin in citric acid solution and the effect of some inorganic anions

The corrosion behaviour of tin in different concentrations of citric acid solutions (0.3–1.0 M, pH=1.8) was studied at 30 °C by potentiodynamic technique. The E/I profiles exhibit an active passive behaviour. The active dissolution involves one anodic peak A associated with a dissolution of the metals as Sn(II) species. The passivity is due to the formation of thin film of SnO₂ and or Sn(OH)₄ on the anode surface. The cathodic sweep shows a small peak C related to the reduction of the passive film. The peak current density I_p of peak A increases with increasing both acid concentration and sweep rate.

The effects of adding increasing concentrations of Na₂CrO₄, NaMoO₄, NaNO₃ and NaNO₂ on the corrosion of tin in 0.5 M citric acid at 30 °C were investigated. Both CrO₄²⁻ and MoO₄²⁻ ions inhibit the corrosion of tin and the extent of inhibition enhances with their concentrations. Addition of either NO₃⁻ or NO₂⁻ accelerates the corrosion of tin. NO₃⁻ ions are more aggressive than NO₂⁻ ions.     

A knowledge-based system for sensor selection

This paper presents a Knowledge-based system (KBS) developed to allow users, who may not be knowledgeable about sensors, to select sensors suitable for their specific needs. The KBS runs on a micro-computer. The selection criteria are user specified and are based on the desired measurement parameters. The system output includes all of the operational and dimensional parameters of the recommended sensor, price, and vendor information.     

Terson''s syndrome in a patient with acute promyelocytic leukemia on all-trans retinoic acid treatment

Hypothermia induced by surface cooling has shown to protect vulnerable regions of the brain during an ischemic insult. This study evaluated the neuroprotective efficacy of neurotensin, a potent hypothermic agent, using a 5-min carotid occlusion procedure in the gerbil. In Experiment 1, the dose-response and time course of neurotensin-induced hypothermia were evaluated (n = 5/dose). Central infusion of 10, 20, and 30 micrograms neurotensin were found to significantly decrease core body temperature of conscious gerbils within 30 min of administration. In Experiment 2, gerbils pretreated with 30 micrograms neurotensin were permitted to become hypothermic or were maintained at 37 degrees-38 degrees C (rectal) during ischemic insult. Other gerbils were pretreated with peptide vehicle prior to ischemic insult (at 37 degrees -38 degrees C) or underwent a sham procedure (n = 6/condition). At 24 h after surgery, gerbils were tested for increased locomotor activity in an open-field apparatus. Gerbils pretreated with peptide vehicle or neurotensin and maintained at 37 degrees-38 degrees C during ischemia had significantly higher activity levels compared to the other treated groups. In contrast, gerbils made hypothermic with neurotensin exhibited activity levels similar to sham gerbils. Histological assessment revealed that neurotensin-induced hypothermia protected the CA1 region from ischemic damage.     

Time jitter analysis of 1-bit sigma-delta synthesizer

This letter presents a general analysis of time jitter in sigma-delta synthesizer. One of the practical applications of 1-bit sigma-delta systems is a generation of high-resolution local oscillator (LO) signals. In order to generate LO signals, one may use a single-bit sigma-delta technique to encode sine waves. Today, direct generation of high-frequency sine wave using a clock with higher frequency, is possible. In this letter, we will analyze different LO signal generators and develop a practical way of computation to decide how to choose the best configuration under minimum degradation of signal-to-noise ratio (SNR) at the output.     

An efficient hybrid multicast transport protocol for collaborative virtual environment with networked haptic

In recent years, we have witnessed a growing interest in the synchronous collaboration based class of applications. Several techniques for collaborative virtual environments (CVE), haptic, audio and visual environments (C-HAVE) have been designed. However, several challenging issues remain to be resolved before CVE and C-HAVE become a common place. In this paper, we focus on applications that are based on closely coupled and highly synchronized haptic tasks that require a high-level of coordination among the participants. Four main protocols have been designed to resolve the synchronization issues in such environments: the synchronous collaboration transport protocol, the selective reliable transmission protocol, the reliable multicast transport protocol and the scalable reliable multicast. While these four protocols have shown good performance for CVE and C-HAVE class of applications, none of these protocols has been able to meet all of the basic CVE requirements, i.e., scalability, reliability, synchronization, and minimum delay. In this paper, we present a hybrid protocol that is able to satisfy all of the CVE and C-HAVE requirements and discuss its implementation and results in two tele-surgery applications. This work is partially supported by Grants from Canada Research Chair Program, NSERC, OIT/Ontario Distinguished Researcher Award, Early Research Award and ORNEC Research Grant.     

Indium selenide microrod films: chemical bath deposition from acidic bath

Films of indium selenide was deposited onto glass and indium tin oxide coated glass substrates in acidic medium using chemical bath deposition at room temperature. Indium sulphate and sodium selenosulphate were used as precursors of In³⁺ and Se^2?, respectively. The structural, surface morphological and optical properties of the deposited films were studied. Diffractograms in structural study revealed the deposited material is In₂Se₃ films. Controlled bath conditions resulted in the evolution of the In₂Se₃ microrod-like morphology. The optical band gap of the film was found to be 1.7 eV.     

Enhancing encoding capacity of combinational test stimulus decompressors

While scan-based compression is widely utilized in order to alleviate the test time and data volume problems,the overall compression level is dictated not only by the chain to channel ratio but also the ratio of encodable patterns.Aggressively increasing the number of scan chains in an effort to raise the compression levels may reduce the ratio of encodable patterns,degrading the overall compression level.In this paper,we present various methods to improve the ratio of encodable patterns.These methods are b...     

Congestion prevention in broadband wireless access systems: An economic approach

While the demand for mobile broadband wireless services continues to increase, radio resources remain scarce. Even with the substantial increase in the supported bandwidth in the next generation broadband wireless access systems (BWASs), it is expected that these systems will severely suffer from congestion, due to the rapid increase in demand of bandwidth-intensive multimedia services. Without efficient bandwidth management and congestion control schemes, network operators may not be able to meet the increasing demand of users for multimedia services, and hence they may suffer an immense revenue loss. In this paper, we propose an admission-level bandwidth management scheme consisting of call admission control (CAC) and dynamic pricing. The main aim of our proposed scheme is to provide monetary incentives to users to use the wireless resources efficiently and rationally, hence, allowing efficient bandwidth management at the admission level. By dynamically determining the prices of units of bandwidth, the proposed scheme can guarantee that the number of connection requests to the system are less than or equal to certain optimal values computed dynamically, hence, ensuring a congestion-free system. The proposed scheme is general and can accommodate different objective functions for the admission control as well as different pricing functions. Comprehensive simulation results with accurate and inaccurate demand modeling are provided to show the effectiveness and strengths of our proposed approach.     

Improving cache locking performance of modern embedded systems via the addition of a miss table at the L2 cache level

To confer the robustness and high quality of service, modern computing architectures running real-time applications should provide high system performance and high timing predictability. Cache memory is used to improve performance by bridging the speed gap between the main memory and CPU. However, the cache introduces timing unpredictability creating serious challenges for real-time applications. Herein, we introduce a miss table (MT) based cache locking scheme at level-2 (L2) cache to further improve the timing predictability and system performance/power ratio. The MT holds information of block addresses related to the application being processed which cause most cache misses if not locked. Information in MT is used for efficient selection of the blocks to be locked and victim blocks to be replaced. This MT based approach improves timing predictability by locking important blocks with the highest number of misses inside the cache for the entire execution time. In addition, this technique decreases the average delay per task and total power consumption by reducing cache misses and avoiding unnecessary data transfers. This MT based solution is effective for both uniprocessors and multicores. We evaluate the proposed MT-based cache locking scheme by simulating an 8-core processor with 2 levels of caches using MPEG4 decoding, H.264/AVC decoding, FFT, and MI workloads. Experimental results show that in addition to improving the predictability, a reduction of 21% in mean delay per task and a reduction of 18% in total power consumption are achieved for MPEG4 (and H.264/AVC) by using MT and locking 25% of the L2. The MT results in about 5% delay and power reductions on these video applications, possibly more on applications with worse cache behavior. For the FFT and MI (and other) applications whose code fits inside the level-1 instruction (I1) cache, the mean delay per task increases only by 3% and total power consumption increases by 2% due to the addition of the MT.     

Qualitative findings of students’ perception on practice of self-regulated strategies in online community discussion

With rapid emergence to the birth of the knowledge era, an active and interactive learning environment is fundamental to any teaching and learning process. Over time, negative implications of traditional learning environment are mounting, and measures must be taken to challenge it. With extensive research on available learning tools, it has become more feasible to provide our students with better learning opportunities. Such was the anticipation in the Malaysian educational context. Hence, this paper aims to address qualitative findings of a study on self-regulated learning strategies conveyed through the proposed interactive e-learning community (iELC). In duration of eight weeks, students (n = 50) from regular national secondary schools were subjected to online learning tasks aimed to advance strategies on self-regulated learning. To date, strategies of self-regulated learning have been perceived as key to learner to succeed academically and after the schooling years. By means of semi-structured interview, data were collected from small group and one-to-one perception. Results were directed at the overall development of self-regulated learning strategies and its diffusion in the iELC discussion platform. Conclusively, these findings add significantly to the understanding of self-regulated learning strategies in an online learning environment.