Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

Performance comparison of tracking filters in terms of predicted hitting point

This article describes the performance comparison of several tracking filters from the viewpoint of gun fire control. It is common that filter performance can be represented by the RMSE of the current state. However, for the design of a gun fire control system, the performance of the tracking filter in terms of prediction is more important since the current state proceeds with a designed dynamic model to a certain future which is used for the final gun order. It is shown that the predicted results amplify the current state RMSE and can be a good measure.     

Knowledge-based system for boundary detection of four-dimensional cardiac magnetic resonance image sequences

A strategy for a knowledge-based system to detect the interior and exterior boundaries of the left ventricle from time-varying cross-sectional images obtained by ECG-gated magnetic resonance imaging (MRI) is discussed. The system uses both fuzzy set theory and Dempster and Shafer theory to manage the knowledge and to control the flow of system information for more efficient use of limited computational resources and memory space. The key to the approach is that it performs edge detection on images through integration and unification of knowledge and information from edge candidates on all the slices and phases of the acquired cardiac MRI dataset. The analysis system does not base decisions on individual measurements, but on consensus opinions by combining many knowledge sources, some of which may not be completely accurate.     

Enhancement of the punch pin durability induced by the PVD coating in production process of the automotive inner pipe

This experimental studies were carried out in order to understand the effects of the PVD coating and the UNSM treatment of HSS55 (high speed steel 55) during the production of the automotive inner pipe by the plastic deformation of S45C. The field test and the SEM images revealed that the PVD coating is necessary in spite of the high compressive residual stresses which were formed at the head of a punch pin. Upon the application of the AlCrN coating with the UNSM treatment the productivity and reliability of a punch pin had improved more than about 2.6 times compared to that of the TiN coating without the UNSM treatment. It is likely that the improvement is caused by the decreased stress concentration factor by the ‘wrapped in oxides’ inside of an abrasion pit. The abrasion pits were mostly generated within range of 5% ∼ 50% of the diameter ratio from the end of a pin and reached the maximum value about 17% from the end of a pin.     

Highly Crystalline Soluble Acene Crystal Arrays for Organic Transistors: Mechanism of Crystal Growth During Dip‐Coating

The preparation of uniform large‐area highly crystalline organic semiconductor thin films that show outstanding carrier mobilities remains a challenge in the field of organic electronics, including organic field‐effect transistors. Quantitative control over the drying speed during dip‐coating permits optimization of the organic semiconductor film formation, although the kinetics of crystallization at the air–solution–substrate contact line are still not well understood. Here, we report the facile one‐step growth of self‐aligning, highly crystalline soluble acene crystal arrays that exhibit excellent field‐effect mobilities (up to 1.5 cm V^?1 s^?1) via an optimized dip‐coating process. We discover that optimized acene crystals grew at a particular substrate lifting‐rate in the presence of low boiling point solvents, such as dichloromethane (b.p. of 40.0 °C) or chloroform (b.p. of 60.4 °C). Variable‐temperature dip‐coating experiments using various solvents and lift rates are performed to elucidate the crystallization behavior. This bottom‐up study of soluble acene crystal growth during dip‐coating provides conditions under which one may obtain uniform organic semiconductor crystal arrays with high crystallinity and mobilities over large substrate areas, regardless of the substrate geometry (wafer substrates or cylinder‐shaped substrates).     

PR-MAC: A practical approach for exploiting relay transmissions in multi-rate WLANs

In this paper, we propose a new MAC protocol, called proxy relay-enabled MAC (PR-MAC), to improve the capacity of multi-rate WLANs. PR-MAC introduces a new entity called Proxy Relay Point (PRP), which serves as a relay between the AP and stations. The cooperation of the AP with PRP replaces direct transmissions for low-rate stations with fast two-hop transmissions while the stations think that they communicate directly with the AP. Our experiment and simulation results showed that PR-MAC can significantly improve the throughput of legacy stations without any modification on the MAC operation of the stations.     

Stable single-frequency fiber ring laser for 25-GHz ITU-T grids utilizing saturable absorber filter

A stable single-frequency fiber ring laser is proposed that operates in a single mode for more than an hour by incorporating unpumped erbium-doped fiber (EDF) as a saturable absorber filter and optimizing the length of EDF used as gain medium. This laser can be continuously tuned to 25-GHz spacing that precisely matches the ITU-T grids by temperature control of etalon filter. This laser had a signal-to-source spontaneous emission ratio higher than 70 dB, and lasing frequencies of 361 channels was matched to ITU-T grids with excellent flatness. Frequency offset from the ITU-T grid was less than 0.14 GHz. The linewidth and the relative intensity noise value was less than 1.3 kHz and 130 dB/Hz (above 250 kHz), respectively.     

Metalorganic Chemical Vapor Deposition of CdTe(133) Epilayers on Si(211) Substrates

Single-crystalline CdTe(133) films have been grown by metalorganic chemical vapor deposition on Si(211) substrates. We studied the effect of various growth parameters on the surface morphology and structural quality of CdTe films. Proper oxide removal from the Si substrate is considered to be the principal factor that influences both the morphology and epitaxial quality of the CdTe films. In order to obtain single-crystalline CdTe(133) films, a two-stage growth method was used, i.e., a low-temperature buffer layer step and a high- temperature growth step. Even when the low-temperature buffer layer shows polycrystalline structure, the overgrown layer shows single-crystalline structure. During the subsequent high-temperature growth, two-dimensional crystallites grow faster than other, randomly distributed crystallites in the buffer layer. This is because the capturing of adatoms by steps occurs more easily due to increased adatom mobility. From the viewpoint of crystallographic orientation, it is assumed that the surface structure of Si(211) consists of (111) terrace and (100) step planes with an interplanar angle of 54.8°. This surface structure may provide many preferable nucleation sites for adatoms compared with nominally flat Si(100) or (111) surfaces. The surface morphology of the resulting films shows macroscopic rectangular-shaped terrace—step structures that are considered to be a (111) terrace with two {112} step planes directed toward 〈110〉.     

Efficient intra-mode skip algorithm using RD costs of SUB8 3 8 and I4MB

H.264/AVC employs a rate-distortion (RD) optimisation technique to determine the best coding mode for each macroblock (MB). An intra-mode skip decision algorithm is presented based on RD costs of the SUB8 times 8 mode and the 14 MB mode to reduce the processing time. Experimental results on test video sequences show that the computational complexity has been reduced by about 20%, with nearly negligible loss of peak signal-to-noise ratio (PSNR) value.