Techniques for high-frequency integrated test and measurement

This paper describes techniques for the on-chip measurement of high-frequency and/or high-bandwidth electrical phenomena in ultra large-scale integration environments. The techniques rely on the integration of multiple compact and robust electronic test devices, or cores, at various locations within an integrated circuit. The cores consist primarily of signal generators that approximate the output of a sigma-delta modulator using finite repetitious bit patterns and a small set of highly robust analog components. They are capable of digitizing on-chip signals at gigahertz rates even using low-cost manufacturing processes. Simple communication between the multiple cores enables the migration of many "board-level" type measurements down to the chip level.     

Segmented polymer networks containing amino‐dendrimers

Polymer networks in which poly(propylene imine) dendrimers (Astramol?) are connected to each other by linear polytetrahydrofuran (polyTHF) segments, were prepared by two methods. The first method was a one‐step procedure in which bifunctionally living polyTHF, obtained by initiation of the THF polymerization with trifluoromethane sulfonic anhydride (triflic anhydride), was reacted with an amino‐dendrimer. This reaction was very fast but did not allow formation of the end products. The second method was a two‐step procedure. In a first step, living polyTHF, prepared with acryloyloxybutyl triflate as initiator, was grafted on an amino‐dendrimer, to form a star‐like, acrylate‐terminated polyTHF multi‐macromonomer with the dendrimer as core. In a second step, networks were obtained by Michael addition between the acrylate end‐groups and unreacted amino‐groups of the dendrimer. This cross‐linking reaction occurred spontaneously upon heating of the solution of the multi‐macromonomer with gelation times varying from a few minutes to a few hours, depending on the temperature and the composition of the prepolymers. With this method it was possible to prepare networks in the form of coatings or films. © 2003 Society of Chemical Industry     

Polymer networks based on α,ω-methacrylate-terminated poly(1,3-dioxolane)

α,ω-Methacrylate-terminated poly(1,3-dioxolane)s (polyDXL) were synthesized by cationic ring-opening polymerization of DXL in the presence of methylene-bis(oxyethylmethacrylate) as transfer agent. If the initiator concentration is small compared with the transfer agent concentration, the molecular weights of the polymers are governed by the ratio of the reacted monomer to the reacted transfer agent. The α,ω-methacrylate-terminated polyDXLs obtained undergo free radical polymerization with formation of polyacetal networks. The properties of the networks as function of the molecular weight of the corresponding prepolymers are reported.     

用于制导弹药的自适应自动驾驶仪设计

传统制导弹药自动驾驶仪的设计要求精确的气动模型,并依赖于变增益(gainschedule),以说明系统的非线性.本文给出了一种简化自动驾驶仪设计程序的方法:在单一飞行条件下设计逆控制器,将逆控制器与在线神经网络组合,以说明因近似逆引起的误差,这样减少了大量设计程序及精确的气动数据.这些数据在大攻角或其它情况下很重要,因为这些领域中的空气动力特征变得高度非线性化.研究发现:逆的选择在其实现的过程中很重要,所以详细讨论.最后,给出该方法在非线性6自由度制导弹药中的模拟结果.     

1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine as a substrate of cytochrome P450 2D6: allosteric effects of NADPH-cytochrome P450 reductase

1-Methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP), a neurotoxin that produces Parkinsonism symptoms in man, has been examined as a substrate of recombinant human cytochrome P450 2D6. When cumene hydroperoxide is used as an oxygen and electron donor, a single product is formed, identified as 4-phenyl-1,2,3,6-tetrahydropyridine. The K(m) for formation of this product (130 microM) is in agreement with the dissociation constants for MPTP binding to the enzyme determined by optical and nuclear magnetic resonance (NMR) spectroscopy. When the reaction is carried out with nicotinamide adenine dinucleotide phosphate (reduced) (NADPH) and recombinant human NADPH-cytochrome P450 reductase, a second product, identified as 1-methyl-4-(4'-hydroxyphenyl)-1,2,3,6-tetrahydropyridine, is formed in addition to 4-phenyl-1,2,3,6-tetrahydropyridine. The K(m) values for formation of these two products are 19 microM and 120 microM, respectively. Paramagnetic relaxation experiments have been used to measure distances between the protons of bound MPTP and the heme iron, and these have been used to construct models for the position and orientation of MPTP in the active site. For the cytochrome alone, a single mode of binding was observed, with the N-methyl close to the heme iron in a position appropriate for the observed N-demethylation reaction. In the presence of the reductase, the data were not consistent with a single mode of binding but could be explained by the existence of two alternative orientations of MPTP in the active site. One of these, characterized by a dissociation constant of 150 microM, is essentially identical to that observed in the absence of the reductase. In the second, which has a K(d) of 25 microM, the MPTP is oriented so that the aromatic ring is close to the heme iron, in a position appropriate for p-hydroxylation leading to the formation of the product seen only in the presence of the reductase. In the case of codeine, another substrate for cytochrome P450 2D6, the addition of reductase had no effect on the nature of the product formed, the dissociation constant, or the orientation in the binding site. These observations show that NADPH-cytochrome P450 reductase has an allosteric effect on the active site of cytochrome P450 2D6 that affects the binding of some substrates but not others.     

Should acyclovir prophylaxis be used in late pregnancy in women with recurrent genital herpes infection? How to use a clinical decision analysis

Contact stomatitis is rather uncommon because of the relative resistance of the oral mucosa to irritant agents and allergens. The clinical manifestations of contact stomatitis are extremely variable and include erythema, erosions, ulcerations, leukoplakia-like lesions, and lichenoid reactions. Clinical signs are frequently less pronounced than subjective symptoms, and patients commonly experience severe functional problems despite only mild mucosal alterations. Allergic stomatitis is rare and almost always attributable to metallic mercury and gold salts. A careful history and an accurate examination of the oral cavity, teeth, and dental restorations are essential for a correct diagnosis. Patch testing is indicated in all lesions that are not clearly related to trauma or physical injuries. Patch testing is not useful in the burning mouth syndrome. Evaluation of clinical relevance of patch test results is always very difficult and requires an interdisciplinary approach to the patient. Successful treatment requires the identification and elimination of the causative factor, when possible. It is important to bear in mind that replacement of dental restorations and prostheses may be very expensive and stressful for the patient and thus should not be recommended when their causative role is doubtful.     

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

Image analysis results are reported on the generation of damage in particulate reinforced metal matrix composites during compressive deformation. The technique allows the automated collection of data on the incidence of particle fracture and void formation in the matrix as a function of important microstructural parameters such as local particle volume fraction and particle size. There is a strong relationship between damage and the local volume fraction of the reinforcement proving that damage formation is accentuated in regions of particle clustering. With the SiC reinforced materials examined, there was observed to be a change in dominance of damage mechanism from particle fracture at low local volume fractions to void formation in the matrix within strongly clustered regions. The results are compared with finite element (FE) modelling of the compressive deformation of clustered particles using a simple cluster of equi-spaced particles. The FE results suggest that plastic flow is generally inhibited in clustered regions. In certain highly clustered configurations shielding is such that flow does not occur in the heart of the cluster even at high levels of average plastic strain. The modelling suggests that the change in dominance of damage mechanism is related to the dramatic increase in tensile hydrostatic stresses in the matrix with higher levels of particle clustering.     

Stochastic complexity measures for physiological signal analysis

Traditional feature extraction methods describe signals in terms of amplitude and frequency. This paper takes a paradigm shift and investigates four stochastic-complexity features. Their advantages are demonstrated on synthetic and physiological signals; the latter recorded during periods of Cheyne-Stokes respiration, anesthesia, sleep, and motor-cortex investigation     

Reaction time during cocaine versus alcohol withdrawal: longitudinal measures of visual and auditory suppression

Visual and auditory stimulus discrimination tasks, analogous to those used in the Reitan-Klove Sensory Perceptual Examination, were performed by 12 cocaine-dependent and 5 alcohol-dependent patients after 1 week, 3 weeks, and 3 months of verified abstinence. Sixteen control subjects, who were not substance-dependent, performed the same tasks after comparable intervals. During each task, either visual or auditory stimuli were presented in the left, in the right, or in both sensory fields. A simple key press was made to discriminate these conditions. Cocaine-dependent patients responded more slowly than control subjects during both tasks. The reaction-time slowing persisted across all three sessions, spanning a 3-month period of abstinence. There were no significant differences between the cocaine-dependent and control groups in response accuracy. In the context of other findings, these findings are interpreted as reflecting an enduring effect of prior cocaine dependence on motor as opposed to sensory functioning.