Pleiotropic Effects of APOB Variants on Lipid Profiles,Metabolic Syndrome,and the Risk of Diabetes Mellitus

Apolipoprotein B (ApoB) plays a crucial role in lipid and lipoprotein metabolism. The effects of APOB locus variants on lipid profiles, metabolic syndrome, and the risk of diabetes mellitus (DM) in Asian populations are unclear. We included 1478 Taiwan Biobank participants with whole-genome sequence (WGS) data and 115,088 TWB participants with Axiom genome-wide CHB array data and subjected them to genotype–phenotype analyses using APOB locus variants. Five APOB nonsynonymous mutations, including Asian-specific rs144467873 and rs13306194 variants, were selected from participants with the WGS data. Using a combination of regional association studies, a linkage disequilibrium map, and multivariate analysis, we revealed that the APOB locus variants rs144467873, rs13306194, and rs1367117 were independently associated with total, low-density lipoprotein (LDL), and non-high-density lipoprotein (non-HDL) cholesterol levels; rs1318006 was associated with HDL cholesterol levels; rs13306194 and rs35131127 were associated with serum triglyceride levels; rs144467873, rs13306194, rs56213756, and rs679899 were associated with remnant cholesterol levels; and rs144467873 and rs4665709 were associated with metabolic syndrome. Mendelian randomization (MR) analyses conducted using weighted genetic risk scores from three or two LDL-cholesterol-level-associated APOB variants revealed significant association with prevalent DM (p = 0.0029 and 8.2 × 10⁻⁵, respectively), which became insignificant after adjustment for LDL-C levels. In conclusion, these results indicate that common and rare APOB variants are independently associated with various lipid levels and metabolic syndrome in Taiwanese individuals. MR analyses supported APOB variants associated with the risk of DM through their associations with LDL cholesterol levels.     

Physical,Chemical, and Biological Properties of Chitosan-Coated Alginate Microparticles Loaded with Porcine Interleukin-1β: A Potential Protein Adjuvant Delivery System

We previously developed chicken interleukin-1β (IL-1β) mutants as single-dose adjuvants that induce protective immunity when co-administered with an avian vaccine. However, livestock such as pigs may require a vaccine adjuvant delivery system that provides long-lasting protection to reduce the need for successive booster doses. Therefore, we developed chitosan-coated alginate microparticles as a carrier for bovine serum albumin (BSA) or porcine IL-1β (pIL-1β) and assessed their physical, chemical, and biological properties. Electrospraying of the BSA-loaded alginate microparticles (BSA/ALG MPs) resulted in an encapsulation efficiency of 50%, and those MPs were then coated with chitosan (BSA/ALG/CHI MPs). Optical and scanning electron microscopy, zeta potential analysis, and Fourier transform infrared spectroscopy were used to characterize these MPs. The BSA encapsulation parameters were applied to ALG/CHI MPs loaded with pIL-1β, which were not cytotoxic to porcine fibroblasts but had enhanced bio-activity over unencapsulated pIL-1β. The chitosan layer of the BSA/ALG/CHI MPs prevented burst release and facilitated sustained release of pIL-1β for at least 28 days. In conclusion, BSA/ALG/CHI MPs prepared as a carrier for pIL-1β may be used as an adjuvant for the formulation of pig vaccines.     

Bioconjugated Thymol-Zinc Oxide Nanocomposite as a Selective and Biocompatible Antibacterial Agent against Staphylococcus Species

Owing to the rapid spread of antibiotic resistance among Staphylococcus species, effective and low-risk alternatives to antibiotics are being actively searched. Thymol (THO), the most abundant component of the oil extracted from thyme, can be considered as a natural antibacterial alternative. However, the low antibacterial activity and non-selectivity of THO limit its usage as a universal anti-Staphylococcus agent. Herein, we report the bioconjugation of THO with ZnO nanoparticle (ZO), which resulted in the TZ nanocomposite (NC), as a potent and selective antibacterial agent against Staphylococcus species, particularly S. epidermidis. The cell-free supernatant (CFS) of ATCC 25923 cultures was employed for the production of TZ NC. Successful production of TZ NC was confirmed via X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, and ultraviolet–visible (UV–Vis) studies. TZ NC had selective efficacy against Staphylococcus species, with MIC values 2–32-fold lower than THO. The antibacterial mechanisms of TZ NC are proposed to involve membrane rupture, suppression of biofilm formation, and modulation of new cell wall and protein-synthesis-associated cellular pathways. Its biocompatibility against HCT116 cells was also checked. Our findings suggest that the TZ nanocomposite could improve the selectivity and bactericidal activity of THO against target species.     

Highly Reliable High-Brightness GaN-Based Flip Chip LEDs

The properties of indium-tin-oxide (ITO)/Ni films as transparent ohmic contacts of nitride-based flip chip (FC) light emitting diodes (LEDs) were studied. It was found that 300degC rapid thermal annealed (RTA) ITO(15 nm)/Ni(1 nm) could provide good electrical and optical properties for FC LED applications. It was also found that 20-mA operation voltage and output power of the 465-nm FC LEDs with ITO/Ni/Ag reflective mirror were 3.16 V and 21 mW, respectively. Furthermore, it was found that output intensity of the proposed LED only decayed by 5% after 1200 h under 30-mA current injection at room temperature.     

Protein nanopatterns and biosensors using gold binding polypeptide as a fusion partner

An efficient strategy for immobilizing proteins on a gold surface was developed by employing the gold binding polypeptide (GBP) as a fusion partner. Using the enhanced green fluorescent protein (EGFP), severe acute respiratory syndrome coronavirus (SARS-CoV) envelope protein (SCVme), and core streptavidin (cSA) of Streptomyces avidinii as model proteins, specific immobilization of the GBP-fusion proteins onto the gold nanoparticles and generation of protein nanopatterns on the bare gold surface were demonstrated. The GBP-fused SCVme bound to gold nanoparticles successfully interacted with its antibody and showed changes in absorbance and color, allowing efficient diagnosis of SARS-CoV. The fusion proteins could be successfully immobilized on the gold surface by nanopatterning and microcontact printing as examined by atomic force microscopy and surface plasmon resonance analysis. The poly(dimethylsiloxane) microfluidic channels were created on the gold surface and were used for antigen-antibody and DNA-DNA interaction studies. Specific immobilization of GBP-EGFP fusion protein and its interaction with the antibody in the microchannels could be demonstrated. By immobilizing the DNA probe through the use of GBP-fused cSA, specific hybridization of the target DNA prepared from Salmonella could also be achieved. The GBP-fusion method allows immobilization of proteins onto the gold surface without surface modification and in bioactive forms suitable for studying protein-protein, DNA-DNA, and other biomolecular interaction studies. Furthermore, these studies can be carried out in a microfluidic system, which allows high-throughput analysis of biomolecular interactions.     

LiF enhanced nucleation of the low temperature microcrystalline silicon prepared by plasma enhanced chemical vapour deposition

A 15-nm lithium fluoride (LiF) thin film evaporated on glass substrate is shown to enhance the nucleation of microcrystalline Si grown by plasma enhanced chemical vapour deposition at the amorphous/microcrystalline boundary conditions. The effect is more pronounced at low substrate temperatures, nucleation density being 10 times higher at ∼ 80 °C. The effect is ascribed to the ionic chemical nature of LiF, the low work function material used in organic electronic devices, and we propose its use for micro patterning crystalline Si regions in otherwise amorphous Si film.     

Hopping conductivity of metal-dielectric nanocomposites produced by means of magnetron sputtering with the application of oxygen and argon ions

Testing of electrical properties of nanocomposites (Co_0,45Fe_0,45Zr_0,1)_x + (Al₂O₃)_1+x within the concentration range of 0.30 < x < 0.65, produced by means of magnetron sputtering of a target composed of stripes of metallic alloy and dielectric, has been carried out. It has been found that the studied materials contain metallic nanoparticles of a diameter ranging from 6 to 10 nm. Alternating current conduction at x < 0.50 is realized by hopping mechanism while at x > 0.50 metallic conductivity is observed.The obtained results have been analyzed using a model of hopping conductivity in the egime developed earlier. This analysis allowed to extract dependences of activation energy ΔE_τ and times τ in a hopping regime after isochronous (15 min) thermal annealings within the range from 293 K to 673 K.     

Effect of TiO2 on high-temperature thermoelectric properties of ZnO

The as-sintered Zn_1−xTi_xO (0.01 ≤ x ≤ 0.05) samples contained a solid solution of Zn_1−xTi_xO with a wurtzite structure and a small amount of the cubic spinel Zn₂TiO₄. The amount of Zn₂TiO₄ increased with an increase in TiO₂ content. The density and grain size increased with the small TiO₂ content (≤0.01), and then they decreased gradually by further increasing the TiO₂ content. The addition of TiO₂ to ZnO led to a significant increase in the electrical conductivity and a decrease in the absolute value of the Seebeck coefficient, resulting in an increase in the power factor. The highest value of power factor (7.6 × 10⁻⁴ W m⁻¹ K⁻²) was attained for Zn_0.98Ti_0.02O at 1073 K. It is demonstrated that the TiO₂ addition is fairly effective for enhancing thermoelectric properties.