Sensitivity analysis for simulation-based decision making: Application to a hospital emergency service design

An increasing concern of decision makers when dealing with system design is preparation for a wide range of potentially uncertain operating conditions. This paper provides a novel multiobjective approach for simulation-driven decision making that accounts for not only the conventional average system performance indices, but also (i) upper-tail, or extreme, values of these indices, and (ii) measures of their sensitivity to uncertainty in model parameters. The proposed approach is applied to a hospital emergency department service design case study wherein different design alternatives are compared using total time-in-system performance metric under multiple uncertain operating conditions.     

Miniature packaged actively mode-locked semiconductor laser with tunable 20 ps transform limited pulses

Miniature, fibre tailed and packaged, wavelength tunable actively mode locked semiconductor lasers have been developed for use as sources of approximately 20 ps transform limited pulses. Continuous stable operation with >40 nm tuning ranges centred either at 1.3 mu m or 1.55 mu m have been demonstrated. The package has an adjustable cavity length enabling the repetition frequency to be selected between 2 GHz and 8 GHz. Mean output powers in the monomode fibre tail are in the range -10 dBm to -5 dBm.<>     

STRATIGRAPHIC CORRELATION AND SOURCE ROCK CHARACTERISTICS OF THE BALUTI FORMATION FROM SELECTED WELLS IN THE ZAGROS FOLD BELT,KURDISTAN REGION,NORTHERN IRAQ

The Upper Triassic Baluti Formation has been identified and mapped based on its log response in selected wells from the Zagros foldbelt in the Kurdistan Region of northern Iraq. A preliminary evaluation of the formation's source rock potential was made by Rock-Eval screening analysis in four wells along a NW-SE profile (Atrush-1, Shaikan-5B, Taq Taq-22 and Miran-2) with maturity determined from reflectance measurements in samples from well Taq Taq-22. The Baluti Formation consists of thinly interbedded shales, carbonates and anhydrite ranging in thickness from 48 m in well Atrush-1 to 118 m in well Miran-2. The Rock-Eval screening was conducted primarily on bulk cuttings samples plus selected picked cuttings. The TOC content is low to moderate (0.23 to 1.14 wt%). However, the shale content in many of the analysed bulk samples was relatively low, making assessment of the source potential problematic. The highest TOCs are recorded from the thickest analysed sections from wells Miran-2 and Taq Taq-22, where high-gamma bituminous shales are present. Rock-Eval T_max values ranging from 295 to 438°C are not consistent with estimates of pre-Zagros burial to depths of between 4600 m (Atrush-1) and 6900 m (Miran-2). The relatively low T_max values suggest that the S2 response does not reflect kerogen pyrolysis in these samples and may be due to the presence of solid bitumen, which is observed in the Baluti Formation in at least three of the study wells (Taq Taq-22, Miran-2 and Shaikan-5B). Little pyrolysable organic matter remains in the formation due to the interpreted deep pre-Zagros burial and the consequent high maturity in Taq Taq-22 (VR = 1.51%R_o) and Miran-2 (estimated VR >2%R_o), and the poor source character in Atrush-1 and Shaikan-5B. Organic petrography suggests the presence of vestiges of Types I and II kerogen in Taq Taq-22, with bitumen observed as stains in the matrix of the shales and also in the pores and fractures of interbedded dolostones. However, bitumen reflectance determinations for Taq Taq-22 indicate an equivalent vitrinite reflectance maturity of no more than 0.93%R_o, which is significantly less than that of the indigenous vitrinite, implying the solid bitumen in this well is derived primarily from migrated hydrocarbons. Further detailed analysis is required, but the results suggest that the Baluti Formation may have sourced hydrocarbons in its depocentre which is identified in this study as covering a NW-SE trending area between Bekhme and Sangaw.     

Self-excited vibrations of optical microresonators

Microresonators in the form of metal coated silicon dioxide strips have been driven into resonant vibration by the application of unmodulated fibre-guided light. The experiments carried out to observe this phenomenon are described, their results presented and discussed, and the implications for multiplexing microresonators sensors in fibre-optic systems are outlined     

Changes of electrical properties by Al content of AlxGa1−xAs in pHEMT structures as observed using HRXRD

Characterizations on the pseudomorphic High Electron Mobility Transistor structure under High-Resolution X-ray Diffraction (HRXRD) have been carried out at room temperature. Variation of Al contents in Al_xGa_1−xAs alloys has been found to show a shift of diffraction peaks. This variation is also found to show the change of lattice constant of crystal and also sheet carrier concentration as obtained from a Hall effect measurement. The latter phenomenon is considerably interesting to study in the early stage of the electrical properties of device based on the crystal structure.     

Narrow line semiconductor laser using fibre grating

A narrow linewidth, low chirp, wavelength selectable, packaged alternative to current DFB structures has been developed which employs a fibre reflection grating incorporated in the fibre pigtail. The wavelength of the packaged device can be determined by the appropriate choice of fibre grating coupled to the antireflection coated facet of a 1.55 mu m BH laser. Linewidths of less than 50 kHz, sidemode suppression of more than 30 dB and chirp when modulated at 1.2 Gbit/s of <0.5 MHz have been demonstrated.<>     

Optimization of solvent-free mechanochemical synthesis of Co/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts using low- and high-energy processes

In this work, alumina-supported cobalt (Co/Al₂O₃) catalysts were prepared using new solvent-free mechanochemical synthesis methods: low-energy vibratory ball milling (Fritsch, Pulverisette 0) and high-energy planetary ball milling (Retsch, PM 100). γ-Al₂O₃ supports and Co/Al₂O₃ catalysts after mechanochemical treatments were characterized using a combination of techniques. The study of solid particles revealed the abrasion and fragmentation phenomena of porous γ-Al₂O₃ particles and pore filling under milling. Functional cobalt particles introduced by the mechanochemical synthesis were observed to be preferentially localized on the outer surface of the alumina supports. High Fischer–Tropsch reaction rates were obtained with the catalysts prepared by optimized mechanochemical synthesis conditions. The enhanced catalytic performance can be attributed to the relatively high dispersion of cobalt and the absence of inert cobalt aluminates which are usually present in the catalysts synthesized by the conventional impregnation.     

Fabrication of Worm-Like Mesoporous Silica Monoliths as an Efficient Sorbent for Thorium Ions from Nitrate Media

Radiochemistry - Mesostructured silica monoliths were synthesized using a simple reproducible strategy of an instant direct templating with nonionic Brij-35 copolymer surfactant and C12 alkane...     

Effect of Flavourzyme® on Angiotensin‐Converting Enzyme Inhibitory Peptides Formed in Skim Milk and Whey Protein Concentrate during Fermentation by Lactobacillus helveticus

Angiotensin‐converting enzyme inhibitory (ACE‐I) activity as affected by Lactobacillus helveticus strains (881315, 881188, 880474, and 880953), and supplementation with a proteolytic enzyme was studied. Reconstituted skim milk (12% RSM) or whey protein concentrate (4% WPC), with and without Flavourzyme^® (0.14% w/w), were fermented with 4 different L. helveticus strains at 37 °C for 0, 4, 8, and 12 h. Proteolytic and in vitro ACE‐I activities, and growth were significantly affected (P < 0.05) by strains, media, and with enzyme supplementation. RSM supported higher growth and produced higher proteolysis and ACE‐I compared to WPC without enzyme supplementation. The strains L. helveticus 881315 and 881188 were able to increase ACE‐I to >80% after 8 h of fermentation when combined with Flavourzyme^® in RSM compared to the same strains without enzyme supplementation. Supplementation of media by Flavourzyme^® was beneficial in increasing ACE‐I peptides in both media. The best media to release more ACE‐I peptides was RSM with enzyme supplementation. The L. helveticus 881315 outperformed all strains as indicated by highest proteolytic and ACE‐I activities.     

Electrocatalytic evolution of hydrogen on a novel SrPdO3 perovskite electrode

SrPdO₃ was prepared for the first time by the citrate method. XRD, SEM and TGA characterizations were carried out. The catalytic activity toward hydrogen evolution reaction (HER) was investigated, the activation energy, and reaction order and reaction mechanism have been determined using Tafel polarization and impedance techniques. The modified surface showed up to 100 times more efficiency towards electrocatalytic production of hydrogen. Adsorption of hydrogen on the catalyst was the rate-determining step and the reaction order at the surface of the catalyst is 0.86. The molar magnetic susceptibility was measured using Faraday's method and anti-ferromagnetic character was observed.