Plasma Discharge Initiation of Explosives in Rock Blasting Application： A Case Study

A plasma discharge initiation system for the explosive volumetric combustion charge was designed, investigated and developed for practical application. Laboratory scale experiments were carried out before conducting the large scale field tests. The resultant explosions gave rise to less noise, insignificant seismic vibrations and good specific explosive consumption for rock blasting. Importantly, the technique was found to be safe and environmentally friendly.     

Fuel combustion test in constant volume combustion chamber with built-in adaptor

Combustion tests of pre-mixture of methane and air in constant volume combustion chamber(CVCC) have been carried out by means of flame propagation photo and gas pressure measurement,the effects of CVCC body temperature,intake pressure of pre-mixture of methane and air,equivalence ratio and location of the built-in adaptor have been investigated.The whole combustion chamber can be divided into two parts,i.e.the upper combustion chamber and the lower combustion chamber,by the built-in adaptor with through hol...     

Shop-floor scheduling at shipbuilding yards using the multiple intelligent agent system

The intelligent agent system has become a typical approach to research distributed artificial intelligence and distributed problem solving. However, despite its various technical advantages, the distribution and expansion of the intelligent agent system approach has been limited because existing methodologies rely on specialized applications and therefore require intensive investment to develop new systems. In an attempt to conquer these difficulties, a standardized methodology to construct intelligent agent systems is proposed. This approach deviates from current agent system approaches of repeatedly constructing new and customized expert systems. Specifically, it provides an economical method for developing intelligent agent systems by investigating the possibility of standardizing message communication protocols in linguistics speech-act theory and by supplementing traditional algorithmic systems with intelligent segments using, among others, expert system tools. To verify effectiveness, the shop-floor scheduling system of a large-scale shipbuilding yard has been redesigned, developed, and tested using this approach. This shop-floor scheduling system requires the scheduling of when and where to process block construction under various constraints. It is a difficult four-dimensional time and space allocation problem involving traditional NP-complete search spaces. The tested intelligent agent system proposes an innovative method for reducing the search space into three levels: the algorithm level, the agent intelligence level, and the level of cooperation among agents. It also provides methods for solving deadlock occurrence and non-uniformity problems resulting from parallel processing. Test results demonstrate applicability and economy, among other technical advantages.     

Performance improvement using time delays in multivariable controller design

A new controller for linear multivariable ordinary systems is suggested in which distributed delays are included in the feedback loop. A general design approach to obtain this type of controller is suggested. It is shown that the resulting closed-loop system is asymptotically stable under some sufficient conditions. Sufficient conditions are derived under which the disturbance attenuation, the robustness against parameter variations, and the time-delay stability margins are improved by the proposed controller. The state feedback tracking controller and the dual-state observer are obtained by modification of the proposed controller.     

Effective parameters on diameter of carbon nanotubes by plasma enhanced chemical vapor deposition

The effective parameters on the diameter of carbon nanotubes (CNTs) by plasma enhanced chemical vapor deposition (PECVD) were presented.Among lots of influential parameters,the effects of the catalytic film thickness and the pretreatment plasma power on the growth of CNTs were investigated.The results show that the size of catalytic islands increases by increasing the thickness of catalytic layer,but the density of CNTs decreases.The pretreatment duration time of 30 s is the optimal condition for growing CNTs with about 50 nm in diameter.By increasing the pretreatment plasma power,the diameter of CNTs decreases gradually.However,the diameter of CNTs does not change drastically from 80 to 120 W.The uniformly grown CNTs with the diameter of 50 nm are obtained at the pretreatment plasma power of 100 W.     

LIPID AND CHOLESTEROL OXIDATION,COLOR CHANGES,AND VOLATILE PRODUCTION IN IRRADIATED RAW PORK BATTERS WITH DIFFERENT FAT CONTENT1

An emulsion-type product was prepared to determine the effect of irradiation on lipid and cholesterol oxidation, color change, and volatile production in raw pork with different fat contents. Lipid oxidation increased with an increase in fat content or irradiation dose. Irradiated batters had higher cholesterol oxides than nonirradiated, and the major cholesterol oxides formed in irradiated pork batters were 7α- and 7β-hydroxycholesterol. Hunter color a- and b-values of raw pork batters were decreased by irradiation regardless of fat content. Irradiation increased the amount ofvolatiles significantly. Although lipid oxidation of high fat products (10 and 15% fat) was higher than that of low fat products (4%), high fat products did not always produce greater amount of volatiles. In summary, irradiation increased lipid and cholesterol oxidation, volatiles production and had detrimental effects on the color of raw pork batters under aerobic condition.     

INHIBITION STUDIES ON BURDOCK POLYPHENYL OXIDASE (PPO) ACTIVITY

The inhibitory effect of 4-hexylresorcinol (HR), ascorbic acid (AA), citric acid (CA), and bisulfites on polyphenol oxidase (PPO) of burdock roots was studied. HR was an effective inhibitor at low concentrations used in this study for crude PPO from root slices. A binary mixture of HR and AA at 1.0% concentration for 5 min achieved more than 90% inhibition of crude PPO. AA also showed high antibrowning activity for the purified PPO comparable to that of bisulfites, whereas its activity was much lower than that of HR in the crude extract. The inhibitory effect of the combined use of inhibitors was overall in the decreasing order of HR+AA, HR+CA and AA+CA, irrespective of the crude PPO or the purified PPO from burdock slices.     

Hybrid functional IrO_2-TiO_2 thin film resistor prepared by atomic layer deposition for thermal inkjet printheads

IrO2-TiO2 thin films were prepared by atomic layer deposition using Ir(EtCp)(COD) and titanium isopropoxide (TTIP). The resistivity of IrO2-TiO2 thin films can be easily controlled from 1 500 to 356.7 μΩ·cm by the IrO2 intermixing ratio from 0.55 to 0.78 in the IrO2-TiO2 thin films. The low temperature coefficient of resistance(TCR) values can be obtained by adopting IrO2-TiO2 composite thin films. Moreover, the change in the resistivity of IrO2-TiO2 thin films was below 10% even after O2 annealing process at 600 °C. The step stress test results show that IrO2-TiO2 films have better characteristics than conventional TaN0.8 heater resistor. Therefore, IrO2-TiO2 composite thin films can be used as a heater resistor material in thermal inkjet printhead.