Monitoring web services’ quality of service: a literature review

Monitoring Quality of Service (QoS) compliance is an important procedure in web service environment. It determines whether users’ expectations are met, and becomes the vital factor for them to decide whether to continue paying for the service or not. The monitoring is performed by checking the actual services performance against the QoS stated in Service Level Agreement (SLA). In relation to that, the need for monitoring vague QoS specifications in SLA has become more apparent nowadays. This paper reviews the published literature on web services QoS monitoring. A total of 60 selected articles were systematically analyzed. There were 23 of the articles selected through restrictive search criteria while the other 37 were selected based on unrestrictive search criteria. The review shows that little evidence exists on monitoring vague QoS specifications of web services. Providing ability for monitoring QoS that is specified vaguely in SLA could give new insights and implications to web services field. This paper concludes with some recommended future works to construct the theory and perform the empirical research.     

A comprehensive study on RF MEMS switch

This paper emphasis on state-of-the-art of the earlier until the current trend and demand, principles, design considerations, key performance and fabrication technology of RF MEMS switch devices developed over the past few years. RF MEMS switch performance and features such as actuation voltage, insertion loss, isolation and ease with cost of fabrication and applications are compared and discussed.     

Reduction efficiencies of natural substances for reduced graphene oxide synthesis

Journal of Materials Science - Synthesis of graphene by reducing graphene oxide is the most propitious route for bulk graphene production. Reduction using eco-friendly techniques is more feasible...     

Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

Mild functionalization of carbon nanotubes filled epoxy composites: Effect on electromagnetic interferences shielding effectiveness

The effect of nitric acid mild functionalized multiwalled carbon nanotubes (MWCNTs) on electromagnetic interference (EMI) shielding effectiveness (SE) of epoxy composites was examined. MWCNTs were oxidized by concentrated nitric acid under reflux conditions, with different reaction times. The dispersion of MWCNTs after functionalization was improved due to the presence of oxygen functional groups on the nanotubes surface. Functionalization at 2 h exhibits the highest EMI SE and electrical conductivity of MWCNTs filled epoxy composites. However, EMI shielding performance of MWCNTs filled epoxy composite declined when the functionalization reaction time was prolonged. This was due to extensive damage on the MWCNT structure, as verified by a Raman spectroscope. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42557.     

Structural Control of NiO–YSZ/LSCF–YSZ Dual‐Layer Hollow Fiber Membrane for Potential Syngas Production

The objective of this study was to fabricate dual‐layer hollow fiber as a microreactor for potential syngas production via phase inversion‐based co‐extrusion/cosintering process. As the main challenge of phase inversion is the difficulty to obtain defect‐free fiber, this work focuses on the effect of the fabrication parameters, that is, nonsolvent content, sintering temperature and outer‐layer extrusion rate, on the macrostructure of the produced hollow fiber. SEM images confirm that the addition of nonsolvent has successfully minimized the finger‐like formation. At high sintering temperature, more dense hollow fiber was formed while outer‐layer extrusion rate affects the outer layer thickness.     

Improving Rainfall Forecasting Efficiency Using Modified Adaptive Neuro-Fuzzy Inference System (MANFIS)

Rainfall is one of the most complicated effective hydrologic processes in runoff prediction and water management. The adaptive neuro-fuzzy inference system (ANFIS) has been widely used for modeling different kinds of nonlinear systems including rainfall forecasting. Adaptive Neuro-Fuzzy Inference Systems (ANFIS) combines the capabilities of Artificial Neural Networks (ANN) and Fuzzy Inference Systems (FIS) to solve different kinds of problems, especially efficient in rainfall prediction. This paper after reconsidering conventional ANFIS architecture brings up a modified ANFlS (MANFlS) structure developed with attention to making ANFIS technique more efficient regarding to Root Mean Square Error (RMSE), Correlation Coefficient (R ²), Root Mean Absolute Error (RMAE), Signal to Noise Ratio (SNR) and computing epoch. The modified ANFIS (MANFIS) architecture is simpler than conventional ANFIS with nearly the same performance for modeling nonlinear systems. In this study, two scenarios were introduced; in the first scenario, monthly rainfall was used solely as an input in different time delays from the time (t) to the time (t-4) to conventional ANFIS, second scenario used the modified ANFIS to improve the rainfall forecasting efficiency. The result showed that the model based Modified ANFIS performed higher rainfall forecasting accuracy; low errors and lower computational complexity (total number of fitting parameters and convergence epochs) compared with the conventional ANFIS model.     

Crop yield prediction from remotely sensed vegetation indices and primary productivity in arid and semi-arid lands

Global demands for biomass and arable lands are expected to double in the next 35 years. Scarcity of water resources in arid and semi-arid areas poses a serious threat to their agricultural productivity and hence their food security. In this study, we examine whether crop yields can be predicted from remotely sensed vegetation indices and remotely sensed estimates of primary productivity. Spatial relationships between remotely sensed enhanced vegetation index (EVI), net photosynthesis (P_Net), and gross and net primary production (GPP and NPP, respectively) in irrigated semi-arid and arid agro-ecosystems since the beginning of the century are analysed. The conflict-affected country of Syria is selected as the case study. Relationships between EVI and crop yield are investigated in an effort to enhance food production estimates in affected areas outside governmental jurisdictions. Estimates of NPP derived from reported irrigated agriculture crop data in a semi-arid and an arid zone are compared to remotely sensed NPP in a geospatial environment. Results show that winter crop yields are correlated with spring GPP in semi-arid zones of the study area (R² = 0.85). Summer crop yield can be predicted from either cumulative summer EVI (R² = 0.77) or P_Net in most zones. Where fully irrigated fields are surrounded by hyper-arid landscape, summer P_Net was negative in all instances and EVI was inversely correlated with yield. NPP from crops was much higher (290 gC m^?2 year^?1) in those regions than MOD17 NPP (70 gC m^–2), where 1.0 g of carbon is equivalent to 2.2 g of oven-dry organic matter (= 45% carbon by weight). The gap was less in semi-arid zones (2–39% difference). Overall crop-derived NPP for the period 2000–2013 was 322 versus 300 gC m^–2 for that remotely sensed within the cropped zones of the political units. The results of this study are crucial to derive accurate estimates of irrigated agriculture productivity and to study the effect of the latter on net ecosystem carbon storage.     

Prussian Blue electrodeposition within an oriented mesoporous silica film: preliminary observations

Prussian Blue (PB) has been electrochemically grown through thin mesoporous silica films of novel generation, exhibiting regular arrays of hexagonally packed mesopores channels (3 nm in diameter) oriented perpendicular to the underlying electrode surface. Due to confinement effects, special care has to be taken to ensure effective permeability of PB precursors through the hard silica template, which was best achieved by pulsed electrodeposition from a high ionic strength medium (2 M KCl). Energy dispersive X-ray spectroscopy associated to electron microscopy was used to evidence the presence of PB in the vertically-aligned mesopores, which was also assessed by their electrocatalytic behavior towards H₂O₂ reduction.