A comparative study for consistency-based decision making with interval multiplicative preference relations

ABSTRACT

To ensure the reasonable application and perfect the theory of decision making with interval multiplicative preference relations (IMPRs), this paper continues to discuss decision making with IMPRs. After reviewing previous consistency concepts for IMPRs, we find that Krej?í’s consistency concept is more flexible and natural than others. However, it is insufficient to address IMPRs only using this concept. Considering this fact, this paper researches inconsistent and incomplete IMPRs that are usually encountered. First, programming models for addressing inconsistent and incomplete IMPRs are constructed. Then, this paper studies the consensus of individual IMPRs and defines a consensus index using the defined correlation coefficient. When the consensus requirement does not satisfy requirement, a programming model for improving consensus level is built, which can ensure the consistency. Subsequently, a procedure for group decision making with IMPRs is offered, and associated examples are provided to specifically show the application of main theoretical results.     

Superconvergence analysis of nonconforming finite element method for time-fractional nonlinear parabolic equations on anisotropic meshes

In this paper, we prove a novel result of the consistency error estimate with order $O\left(h^2\right)$ for $E{Q}_1^{rot}$ element (see Lemma 2) on anisotropic meshes. Then, a linearized fully discrete Galerkin finite element method (FEM) is studied for the time-fractional nonlinear parabolic problems, and the superclose and superconvergent estimates of order $O(\tau +h^2)$ in broken $H^1$-norm on anisotropic meshes are derived by using the proved character of $E{Q}_1^{rot}$ element, which improve the results in the existing literature. Numerical results are provided to confirm the theoretical analysis.     

Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

Corrosion behaviour and mechanism of 6082 aluminium alloy in NaCl and Na2SO4 etchants

The corrosion behaviour of 6082 aluminium alloy was studied by measuring the electrochemical impedance spectra and electrode polarization curves. After the electrochemical tests, a microstructural analysis of the samples was conducted by using optical microscopy and electron scanning microscopy techniques to determine the corrosion mechanism. The results show that the Nyquist plot of the electrochemical impedance data in the NaCl solution consists of high- and low-frequency capacitive impedance loops. When ions are added to the NaCl etchant, the Nyquist plots of the electrochemical impedance data are composed of two different curves: a high-frequency capacitive impedance loop and a low-frequency inductive impedance loop. The corrosion current density increases with increasing concentration, and as a result, the corrosion resistance of the aluminium alloy decreases. The microstructures of 6082 aluminium alloy consist of Mg₂Si secondary particles in a large α-Al matrix. Pitting corrosion initially occurs at the boundary between the matrix and secondary particles because the electrode potentials of the matrix and secondary particles are different. Then, corrosion paths develop along the network-like grain boundaries, and finally, massive network-like corrosion occurs throughout the entire alloy.     

γ-radiation effects on metal oxide particles and their wetted surfaces

ABSTRACT

Typical metal oxide corrosion products of structural materials have been irradiated with γ-rays in ultra-pure water to investigate the effect of radiation on the surface oxide and the nature of adsorbed water. Analysis techniques including thermal gravimetric analysis, differential thermal analysis, diffuse reflectance infrared Fourier transform spectroscopy, and X-ray photoelectron spectroscopy before and after γ-irradiation were employed to investigate surface structural effects and adsorbed water behaviour. The production of H₂ in the oxide nanoparticle mixtures was investigated by gas chromatography to probe the mechanism of radiolysis in the water/oxide mixtures and the relationship with surface water. The nature of water at the surface of the oxides was affected by γ-radiation and the relationship was dependent on the particle composition. The rate of H₂ production was shown to be oxide dependent, and higher rates of H₂ formation were attributed to the decomposition of surface adsorbed water. Changes to the surface chemistry and H₂ production rates were found to be highly dependent on the surface chemistry of the metal oxide nanoparticle and no bulk structural changes were observed.     

等离子体预处理对解淀粉芽胞杆菌生长和α-淀粉酶分泌的影响

本研究采用低真空室温射频等离子体对解淀粉芽胞杆菌CICC 10035进行预处理，通过改变放电功率、处理时间和工作气压等参数，筛选最佳工艺条件，并使用蛋白质组学技术，对差异蛋白质进行生物信息学分析，探讨等离子体预处理对菌体生长和产酶性能的影响。结果表明，等离子体预处理的最佳工艺条件为：放电功率120 W，处理时间15 s，工作气压135 Pa。在最佳条件下，发酵48 h后，α-淀粉酶酶活超过400 U/mL，与对照样相比提高约20%。蛋白组学分析表明，等离子体预处理对菌体的蛋白合成及代谢产生了较强的正效应，尤其在DNA修复和氨基酸合成上，一方面提高了菌体活性，延缓其衰亡过程；另一方面促进了α-淀粉酶在菌体内的合成和分泌。     

某新生代红土型金矿选矿试验研究

针对云南某新生代红土型露天金矿金的粒度分布呈粗细极不均匀的特点,采用高离心力场重选工艺进行研究,较好地解决了粗粒金以及微细粒金的回收难题,当原矿金品位1.1g/t,精矿金品位47.23g/t,金回收率达到86.09%,获得了满意的选别指标。     

垂直提升带式输送机的研究

简述了垂直提升带式输送机的布置形式及其主要部件的结构特征     

天然沸石的选矿提纯新工艺研究

本文通过一系列的选矿试验研究，得出了破碎—搅拌—分级提纯天然沸石原矿的新工艺，且工艺过程不含磨矿，流程简单，加工成本低。经上述工艺提纯的天然沸石，基本不含杂质，可直接作为许多工业部门的原材料使用。     

半圆形深槽带式输送机的研究

研究半圆形深槽带式输送机可以实现大倾角输送的工作原理 ,并得出了半圆形深槽带式输送机的基本设计原则 ;在理论分析的基础上 ,给出了合理的托辊组布置方案 ;通过半圆形深槽带式输送机与其他形式带式输送机的比较 ,总结了半圆形深槽带式输送机的特点。