Modeling of a power electronic converter for EMC in the conduction emission frequency band

With the advancement of high‐frequency switching devices, electromagnetic interferences (EMI) have become problems in power electronic converter designs. It is necessary for an electromagnetic compatibility (EMC) design to prospect and consider its possible EMI levels. This paper describes how to compute effects from a power converter to an object point to reduce conduction EMI noises effectively by an appropriate design. Modeling techniques for converter elements are discussed for a model in the conduction emission frequency band by the parameter tuning method and for line constants by an analytical derivation. Then a derived model is simulated for harmonic distributions of loop currents and their magnetic fields. © 2002 Scripta Technica, Electr Eng Jpn, 139(1): 44–50, 2002: DOI 10.1002/eej.1145     

Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Development of coincidence transmission electron microscope. III. Incorporation with gamma-type imaging energy filter

We have developed a new analytical transmission electron microscope (TEM), called coincidence TEM, which, in principle, enables observation of elemental mapping images at a high signal-to-noise ratio. We have previously reported the successful observation of an elemental mapping image of a specimen, but over a very long period of time (168 h). To solve this inefficiency, we installed a gamma-type imaging energy filter in the coincidence TEM to remove the no-loss electrons, which are mainly transmitted electrons. This has enabled the intensity of the background signals in the coincidence measurement to be markedly reduced. The coincidence TEM with a gamma-type imaging energy filter allows the coincidence image to be observed in 3 h, thus, the measurement time is shortened by two orders of magnitude. Moreover, the use of a silicon drift detector (SDD) will shorten the measurement time.     

Strength Analysis of Yttria-Stabilized Tetragonal Zirconia Polycrystals

Tensile strength of Y₂O₃-stabilized ZrO₂ polycrystals (Y-TZP) was measured by a newly developed tensile testing method with a rectangular bar. The tensile strength of Y-TZP was lower than that of the three-point bend strength, and the shape of the tensile strength distribution was quite different from that of the three-point bend strength distribution. It was difficult to predict the distribution curve of the tensile strength using the data of the three-point bend strength by one-modal Weibull distribution. The distribution of the tensile strength was analyzed by two- or three-model Weibull distribution coupled with an analysis of fracture origins. The distribution curve of the three-point bend strength which was estimated by multimodal Weibull distribution agreed favorably with that of the measured three-point bend strength values. A two-modal Weibull distribution function was formulated approximately from the distributions of the tensile and three-point bend strengths, and the estimated two-modal Weibull distribution function for the four-point bend strength agreed well with the measured four-point bend strength.     

Chemical sensing by an electrical oscillator: Detection and quantification of cationic surfactants

A new chemical sensing system using an electrical oscillator has been developed. This sensing system measures the electrical ‘non-linearity’ at the surface of an electrode immersed in a test solution: a sinusoidal voltage is applied to the electrode and the higher harmonics of the output current are obtained by Fourier transformation. This sensing system has been used to detect and quantify surfactant molecules in solutions. The relative intensity P₂/P₁ of the peaks of the second (P₂) and first (P₁) harmonics in the output current was found to be linearly correlated with the logarithms of the concentrations of cationic surfactants such as cetylpyridium bromide (CPB) and cetyl-N,N,N-trimethylammonium bromide (CTAB), but not with those of the anionic surfactant sodium dodecyl sulfate (SDS) or the neutral surfactant Triton X-100. The reproducibility of this sensing system was shown to be excellent.     

Flight Model Performance of 640-GHz Superconductor–Insulator–Superconductor Mixers for JEM/SMILES Mission

Performances of 640-GHz Superconductor–Insulator–Superconductor (SIS) mixers developed for the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) mission are described. SMILES, launched in September 2009, is the first mission to observe atmosphere from space using superconducting mixers. Ground test performances of the SIS mixers show very flat gain and noise characteristics in their observation bands in compliance with the specifications required for SMILES.     

Ultrahigh Electrical Resistance of Poly(cyclohexyl methacrylate)/Carbon Nanotube Composites Prepared Using Surface‐Initiated Polymerization

Multiwalled carbon nanotubes on which poly(cyclohexyl methacrylate)s are densely grafted (PCHMA‐CNTs), are synthesized using a modified surface‐initiated atom transfer radical polymerization technique. The electrical resistance of PCHMA‐CNT is systematically characterized under direct current (DC) and alternating current and compared to that of conventional nanocomposites prepared by blending PCHMA with the CNT (PCHMA/CNT). At a comparable volume fraction of CNT, DC volume resistivity of PCHMA‐CNT is 14 orders of magnitude higher than that of PCHMA/CNT. This is because the grafted polymer with a combination of the high molecular weight and the high grafting density isolates individual CNTs at a long distance in the PCHMA‐CNT system. In addition, impedance analysis reveals that the highly insulated PCHMA‐CNT has the same electrical nature as neat PCHMA, i.e., it is a dielectric. Furthermore, dynamic mechanical analysis shows PCHMA‐CNT has a good mechanical properties as well as ultrahigh electrical resistance.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

Layout Dependent Matching Analysis of CMOS Circuits

Layout has strong influence on matching properties of a circuit. Current matching models, which characterize both local random non-uniformities and global systematic non-uniformities stochastically, are not adequate for the matching analysis taking the effect of layout realization into account. In order to consider topological information of layout into matching analysis, we propose a matching model which treats the random and systematic components separately. Also, we characterize the micro-loading effect, which modulates fabricated line-width according to the local density of layout patterns, into matching analysis. With these two techniques, we can perform matching analysis of CMOS circuits taking layout information into account.