Addendum to: generic rules to evaluate system-failure frequency

In the paper on Generic rules to evaluate system-failure frequency, (see ibid., vol.49, p.85-7, 2000) the authora did not consider the case of shorter mission times while presenting the rules to evaluate system-failure frequency. Time-specific failure-frequency calculations are required for the systems with shorter mission times. One of the practical uses of time-specific failure-frequency is in finding reasonably accurate estimates of failure-rate and reliability of large systems consisting of repairable components, by using combinatorial methods (without using Markov models). This paper shows that, with some minor modifications, the rules in the original paper for evaluating steady-state failure-frequency can be used to find the time-specific failure-frequency     

On the sensitivity of coupled resonator filters without some direct couplings

This paper presents an analysis of the sensitivity of coupled resonator filters in which some direct couplings are missing. The effect of changes in the coupling coefficients and resonant frequencies of the resonators is investigated by directly computing the gradient of the scattering parameters. It is shown that structures that are modular in the input-to-output direction are much less sensitive than those with modularity in the orthogonal direction for the same frequency response.     

A Novel Band-Reject Element for Pseudoelliptic Bandstop Filters

A novel band-reject element for the design of inline waveguide pseudoelliptic band-reject filters is introduced. The element consists of an offset partial-height post in a rectangular waveguide in which the dominant TE₁₀ mode is propagating. The location of the attenuation pole is primarily determined by the height of the post that generates it. The element allows the implementation of weak, as well as strong coupling coefficients that are encountered in asymmetric band-reject responses with broad stopbands. The coupling strength is controlled by the offset of the post with respect to the center of the main waveguide. The posts are separated by uniform sections of the main waveguide. An equivalent low-pass circuit based on the extracted pole technique is first used in a preliminary design. An improved equivalent low-pass circuit that includes a more accurate equivalent circuit of the band-reject element is then introduced. A synthesis method of the enhanced network is also presented. Filters based on the introduced element are designed, fabricated, and tested. Good agreement between measured and simulated results is achieved     

Properties of aqueous solutions of several salts of α,ω-alkanediol disulfates

Several salts of α,ω-sulfates, MO₃SO(CH₂)_n OSO₃M(n=12, 14, 16, 18, and M=Li, Na, and K) were prepared from the corresponding α,ω-alkane diols. The Krafft points of these α,ω-sulfates with common counterion as estimated by electroconductivity measurements increased with the increase of the hydrocarbon chain length, and the effect of the counterions on the Krafft points of the α,ω-sulfates with the same hydrocarbon chain length was in the order : Li<Na<K. Solutions of the α,ω-sulfates, except disodium dodecanediol disulfate, showed two break points corresponding to the first and second critical micelle concentration in each plot of the electroconductivity as a function of the concentration. The existence of the second break point suggested that another aggregation of rearrangement of the existing aggregates occurs in α,ω-sulfate solutions in addition to the usual micelle formation. The first and second break points of α,ω-sulfates with sodium counterion decreased logarithmically with increasing total number of methylene groups. The relationships were given as follows: log(first break point)=−0.138Nc−0.095; log(second break point)=−0.104Nc−0.251. The effect of the counterions upon the break points of α,ω-sulfates with the same hydrocarbon chain length was in accordance with their positions in the lyotropic series.     

Comments, with reply, on 'Spectral domain computation of characteristic impedances and multiport parameters of multiple coupled microstrip lines' by V.K. Tripathi and H. Lee

The commenter argues the question of whether it is possible to normalize currents and voltages simultaneously, as implied by a relationship used in the above-titled paper (see ibid., vol.37, no.1, p.215-222, 1989). In their reply, the authors identify two main issues raised in the comments, one dealing with the definition and meaning of characteristic impedance for general multiconductor systems and the other dealing with the computation of the elements of the line mode impedance matrices. They attempt to clarify both issues.<>     

Information geometry of turbo and low-density parity-check codes

Since the proposal of turbo codes in 1993, many studies have appeared on this simple and new type of codes which give a powerful and practical performance of error correction. Although experimental results strongly support the efficacy of turbo codes, further theoretical analysis is necessary, which is not straightforward. It is pointed out that the iterative decoding algorithm of turbo codes shares essentially similar ideas with low-density parity-check (LDPC) codes, with Pearl's belief propagation algorithm applied to a cyclic belief diagram, and with the Bethe approximation in statistical physics. Therefore, the analysis of the turbo decoding algorithm will reveal the mystery of those similar iterative methods. In this paper, we recapture and extend the geometrical framework initiated by Richardson to the information geometrical framework of dual affine connections, focusing on both of the turbo and LDPC decoding algorithms. The framework helps our intuitive understanding of the algorithms and opens a new prospect of further analysis. We reveal some properties of these codes in the proposed framework, including the stability and error analysis. Based on the error analysis, we finally propose a correction term for improving the approximation.     

New dual-mode dielectric resonator filters

The paper presents a new design of dual-mode dielectric-loaded rectangular cavity filters. The response of the filter is mainly controlled by the location and orientation of the coupling apertures with no intra-cavity coupling. Each dual-mode dielectric-loaded cavity generates and controls one transmission zero which can be placed on either side of the passband. Example filters which demonstrate the soundness of the design technique are presented.     

Gradient Adaptive Paraunitary Filter Banks for Spatio-Temporal Subspace Analysis and Multichannel Blind Deconvolution

Paraunitary filter banks are important for several signal processing tasks, including coding, multichannel deconvolution and equalization, adaptive beamforming, and subspace processing. In this paper, we consider the task of adapting the impulse response of a multichannel paraunitary filter bank via gradient ascent or descent on a chosen cost function. Our methods are spatio-temporal generalizations of gradient techniques on the Grassmann and Stiefel manifolds, and we prove that they inherently maintain the paraunitariness of the multichannel adaptive system over time. We then discuss the necessary practical approximations, modifications, and simplifications of the methods for solving two relevant signal processing tasks: (i) spatio-temporal subspace analysis and (ii) multichannel blind deconvolution. Simulations indicate that our methods can provide simple, useful solutions to these important problems.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.     

Ultrathin Organic Electrochemical Transistor with Nonvolatile and Thin Gel Electrolyte for Long‐Term Electrophysiological Monitoring

Skin‐based electrical‐signal monitoring is one of the basic and noninvasive diagnostic methods for observing vital signals that contain valuable information about the dynamic status of the inner body. Soft bioelectronic devices are developed for the acquisition of high‐quality biosignals by taking advantage of their inherent thin and soft bodies. Among these devices, the organic electrochemical transistor (OECT) is a promising local transducing amplifier because of its key advantages, such as low operating voltage, high transconductance, and biocompatibility. However, the transistor's direct electrolyte‐gated operation limits its ability to measure biosignals only when the electrolyte exists. Here, an ultrathin OECT‐based wearable electrophysiological sensor based on a thin (≈6 µm) and nonvolatile gel electrolyte is reported, which can operate on dry biological surfaces. This sensor can measure biopotentials with a high mechanical stability and high signal‐to‐noise ratio (24 dB) even from dry surfaces of the human body and also shows stable performance during long‐term continuous monitoring and multiple reuse in a test that lasted more than a week.