Ionic mass transfer measurements in the case of submerged multijets impinging on to a flat surface

In the case of submerged multijets impinging on to a flat surface, the limiting current densities were measured at microelectrodes, fixed flush with the target surface using diffusion controlled electrode reactions (i.e. reduction of ferricyanide ion). The height of the multijet distributor from the target surface (Y) was varied from 5 to 9 cm. The numbers of holes of the distributor (N) studied were 76 and 141. The variation of mass transfer data with radial distance reveals the existence of two different regions, i.e. the impingement region and the wall jet region. The mass transfer rate increased with increase in Y in the impingement region. The effect of Y is negligible in the wall jet region. Decrease in N decreases the mass transfer rate in both the regions. The data are correlated separately for the two regions.     

Alternative Granulation Technique: Melt Granulation

A melt granulation process has been investigated (1, 2) which efficiently agglomerates pharmaceutical powders for use in both immediate- and sustained-release solid dosage forms. The process utilizes materials that are effective as granulating fluids when they are in the molten state. Cooling of the agglomerated powders and the resultant solidification of the molten materials completes the granulation process. Both the molten agglomeration and cooling solidification were accomplished in a high shear Collette Gral mixer equipped with a jacketed bowl. Hence, the melt granulation process replaces the conventional granulation and drying operations which use water or alcohol solutions. The melt granulation process has been investigated using immediate- and sustained-release TAVIST® (clemastine fumarate USP) tablet formulations. The TAVIST granulations have been characterized by power consumption monitoring, measurement of the granulation particle size distribution, bulk and tapped density determinations, and loss-on-drying measurements. Scale-up of the melt granulation process for the sustained release TAVIST tablet formulation was judged successful based on a comparison of the hardness, friability, weight uniformity during compression, disintegration time, and dissolution rate data obtained at different manufacturing scales.     

Characterization and evaluating the mechanical performance of halloysite nanotubes reinforced acrylonitrile butadiene styrene/polycarbonate composites exposed to aggressive environmental conditions

Developing light weight polymer based composites dispersed with novel reinforcements which can function well in the presence of aggressive environments is an active research field in the materials engineering. Hence, in the current work, halloysite nanotubes (1 %, 2 %, 4 %, 6 %, 8 % and 10 % by weight) were reinforced into acrylonitrile butadiene styrene/polycarbonate blend and the role of reinforcing phases on the mechanical performance under aggressive environmental conditions has been evaluated. Hardness was measured as gradually increased in the composites with the increased content of the reinforcements. Impact strength of the composites was observed as increased in the composites up to 4 % reinforcement and further decreased. Increased strength was measured for the composite up to 2 % reinforcement. Ductility of the composites was decreased as reflected form the decreased % of elongation with the higher fraction of reinforcements due to induced brittleness. The composites were exposed to diluted sulfuric acid for 3 h and 6 h at 60 °C and then subjected to tensile loading. With the increased time of exposure, composites with 1 % and 2 % reinforcement exhibited relatively better performance.     

Chromatic aberrations of radial gradient-index lenses. I. Theory

Chromatic effects of radial gradient-index materials have been analyzed, and several important conclusions have been derived in terms of material dispersion data. The use of Buchdahl dispersion data, both for base glass materials and ion-exchange pairs, provides some simple relationships for chromatic aberration and helps in selecting suitable materials for producing achromatic radial gradient-index lenses.     

Kinetics of the Hydrolysis of some alkyl halides in aqueous ethyl alcohol

A comparison of the rates of substitution and elimination reactions occuring simultaneously in alkaline hydrolysis of n-amyl chloride, isoamyl chloride, n-amyl iodide and n-hexyl iodide at different temperatures and in varying alcohol-water mixtures, has been made. Under the same conditions the rates of solvolysis of these halides have also been reported. In the case of n-amyl halides there is a much larger rate difference between chloride and bromide than between bromide and iodide.     

Electrical and Thermal Properties of Twin-Screw Extruded Multiwalled Carbon Nanotube/Epoxy Composites

This paper presents the experimental results of dispersing multiwalled carbon nanotubes (MWNTs) into epoxy (space grade structural adhesive) nanocomposites using co-rotating twin screw extrusion process. Two sets of specimens were prepared; set 1 with ultrasonication for predispersing MWNT before extrusion and set 2 direct dispersion of MWNT in the extruder. MWNT was loaded up to 8 vol.% in both the sets. The specimens were characterized for room temperature volume and surface resistivities as per ASTM D257 using Keithley Model 6517 and for thermal conductivity in the temperature range ?50 to 150 °C as per ASTM E 1530 using Thermal Conductivity Instrument (TCI) 2022 SX211. The volume resistivity of sets 1 and 2 decreased to an extent of 10¹¹ and 10⁹ respectively. The surface resistivity drop was of the order of 10⁹ for both the sets. These drops corresponded to the maximum MWNT loading of 8 vol.%. Electrical conductivity values of the specimens were fitted into the Power Law Model to evaluate the critical exponent. Both sets 1 and 2 showed increase in thermal conductivity with increase in temperature in the testing range. Thermal conductivity increased with increase in filler loading and the maximum increase was 60% at 150 °C in case of 8 vol.% MWNT nanocomposites for set 1. The corresponding value for the set 2 was 25%. Thermal conductivity values were predicted using Lewis Nielson model. DSC of the specimens showed increase in glass transition temperature with increase in filler loading. The dispersion of the nanofillers was studied using SEM and the surface morphology using AFM.     

Midwavelength Infrared Avalanche Photodiode Using InAs–GaSb Strain Layer Superlattice

InAs-GaSb strain layer superlattice p⁺-n^--n avalanche photodiodes (APDs) are fabricated using a newly introduced electron-beam aided zinc sulfide deposition. Temperature-dependent measurements were performed on 300 times 300 mum² mesa etched APDs. The effect of passivation was also studied on the diode characteristics and APD performances. Temperature-dependent gain strongly correlates with avalanche mechanism.     

A Visible and Near-Infrared Light-Fueled Omnidirectional Twist-Bend Crawling Robot

In recent years, although light-driven soft actuators have attracted intense scientific attention and achieved remarkable progress, the design and construction of an intelligent robotic system with maneuverability, self-adaptability, untethered control, and greater freedom of action, in particular the omnidirectional motion capability on a plane, remains challenging. Herein, four types of photo-thermal fillers and an unprecedented twist-bend actuation mode is introduced into a liquid crystal elastomer-based soft robot. The obtained twist-bend crawling robot not only exhibits in situ rotation, four-way turning, and four-way linear motion under light irradiation with four wavelength bands (520, 655, 808, and 980 nm), but also demonstrates the ability to avoid obstacles in complex geographical environments. This work may bring a new perspective for fabrication and development of soft robots that can adapt to dynamic and complex environmental conditions.